How do i attach DTF to a mssg so that incident (for the mssg.) fires DTF?

When an error is thrown (business or system), there are cases where incidents are raised explicitly. These incidents are created using seeded error messages. What i've heard is that there is a way to attach a diagnostic test(DTF) to an error message. Which means that when the incident is created using such messages, the corresponding diagnostic tests are automatically run and the reports available for analysis.
Am looking for documentation/guidance on how to achieve the above.
Edited by: user553511 on Aug 24, 2012 3:58 PM

Similar Messages

In mail, how do I attach pictures or documents as icons that open full size

in mail, how do I attach pictures or documents as icons that will open full size?

Try Option + click the picture and choose Show as Icon

I use Mail. How do I attach a file as an icon rather than showing the full text in the message?

I use Mail for my email messages. How do I attach a file as an icon rather than showing the full text in the message box?

Glad you got it working! Incidentally, if you have a relatively new Apple mouse (Magic Mouse or Mighty Mouse should work), you should be able to enable right-click, if you'd like it, by going to System Preferences - Mouse - and turning on "Secondary click". Third-party mice, like Logitech or Microsoft, should have right-click automatically.
Matt

How can I attach a jpg file in a mail message as the file icon, not as an opened image in the text?

How can I attach a jpg file in a mail message as the file icon, not as an opened image in the text?

what's wrong with this picture

In Mavericks Mail, how do you attach a PDF (single-page or multi-page) without the PDF being embedded in the message?

In Mavericks Mail, how do you attach a PDF (single-page or multi-page) without the PDF being embedded in the message?

I attached a .doc file to the message and it appeared as an icon, so I did not have to convert it. I attached a .jpg image — it appeared as a full image, but when I Command+clicked the image, the view as icon window did not appear on the screen. Likewise, I again checked the Mail Menu Bar, and did see 'View as icon.' Side note: I routinely use Mavericks Mail in Classic Mode, so I decided to try both modes. Same results in both modes. I checked my Mail Preferences, but couldn't find anything there, either. I'll continue to look around, but this has me stumped. Thanks for your assistance.

How to creat a Business System and Tech System in SLD for the DB2 DataBase?

Hi,
How to creat a Business System and Tech System in SLD for the DB2 DataBase?
Joseph

Hi,
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Go Through this links..
TBIT41:
https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
TBIT42:
https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
TBIT43:
http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
TBIT44:
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
Also try elearning.
https://www.sdn.sap.com/irj/sdn/elearn
Thanks,
Satya Kumar

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

HT2509 Hello I wonder if anyone knows how to find, download and install a suitable IPA (phonetics) font for the Mac Air? I need to be able to use a pop up window of fonts.

Hello I wonder if anyone knows how to find, download and install a suitable IPA (phonetics) font for the MacBook Air? I need to be able to use a pop up window of fonts.

Unless you've done anything to change it, Google keeps every email that ever passes through their server in your All Mail folder/mailbox/label. Even if you delete stuff, they hold onto it, there. You have to go out of your way to actually delete anything permanently.

HT4061 How do I consolidate purchases from two different ids that are on the same bank account, and eliminate the extra id without losing any purchases?

How do I consolidate purchases from two different ids that are on the same bank account, and eliminate the extra id without losing any purchases? I want my music to match on both ipad and computer.

Purchases are forever tied to the AppleID they were bought with. There is currently no way to consolidate AppleIDs. Sorry.

How do I place an image and insert a different photo for the "mouse down" state?

I have placed an image within an accordian widget and when I select the "mouse down" area in the states dialog box, i click "fill" in the toolbar and insert the photo i want to display when the image is clicked but this image is "covered up" by the originally placed image and is not seen in my states dialog box.
I have done this before when i made rectangles and placed images in rectangles. But i soon realized that you cannot add alternative text to images in rectangles for some frustrating reason.
How do I place and image and have a different image for the mouse down state?

Hello,
This effect can only be achieved when you use the images as a Rectangle Fill. And as you mentioned it above, you cannot add alternative text to images because it is added as a fill and not as a image.
I would suggest you to post this as a feature request on our "Ideas for features in Adobe Muse" section of the forums : http://forums.adobe.com/community/muse/ideas
Regards,
Sachin

Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?

Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?

Help here > Mac OS X: Changing or resetting an account password

HT203167 how do i authorize my computer to download all my music for the store menu? and where do i find the store menu?

how do i authorize my computer to download all my music for the store menu? and where do i find the store menu?

It should be at the top of your Mac's iTunes e.g.
And re-downloading : http://support.apple.com/kb/HT2519

I had free adobe reader and i scanned a doc to send to a client and as of last night i could not send as an attachment thru my email. So I paid for the 89.99 year adobe pkg and it still wont let me email a scanned and saved doc. it says 'an unknown error

i had free adobe reader and i scanned a doc to send to a client and as of last night i could not send as an attachment thru my email. So I paid for the 89.99 year adobe pkg and it still wont let me email a scanned and saved doc. it says 'an unknown error occurred'?

What exactly means "could not"?
And what Adobe product/service did you pay for?

HT201442 How to fix Error 3194 or "This device isn't eligible for the requested build"

how can fix Error 3194 or "This device isn't eligible for the requested build

Generally the result of a jailbroken or hacked phone.

TS3899 Hi. How do I attach more than one document to an email on the iPad, especially if they come from different apps? When writing an email on the iPad there's no option for attachments.

Hi. How do I attach more than one document to an email originating from my iPad, especially if the documents come from different apps? When starting an email there's no option for attachments, unless you send the document from inside an app like iBook and then you can only send one at a time.

How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
 Cheers, Tom

How do i attach DTF to a mssg so that incident (for the mssg.) fires DTF?

Similar Messages

Maybe you are looking for