How do i autofit an image ?????????

im working in Dreamweaver 8, i have a table with rows and
columns .... in the very bottom cell i have an image, above it
there is some text with no preset width, .... so i might need to
strech that cell's width ... when i do, that image below it keeps
the same width and i can see some white space on each side .... how
do i make this image autofit the cell it is in and make it stretch
to the width of the cell whenever i adjust it to my preferences.
thank you for your help.

> how do i make this image autofit the cell it is in and
make it stretch to
> the width of the cell whenever i adjust it to my
preferences.
You cannot, really, do this in any practical sense. If the
image is a
simple GIF image (say lines or colored regions only) then you
can place it
in the cell and make its dimensions be 100%. As that cell
grows in width,
so will the image. But its aspect ratio will change, so
anything other than
the simplest of images will suffer in quality as this change
occurs. If the
image is any more complex than that, or if it's a JPG image,
then don't even
try.
Notwithstanding this practical advice, if the image is one
that can tile
seamlessly, you can make it a background image for the cell.
Then, as the
cell expands, the image will tile horizontally/vertically to
fill the space.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bdbb" <[email protected]> wrote in message
news:fggu4v$85$[email protected]..
> im working in Dreamweaver 8, i have a table with rows
and columns .... in
> the
> very bottom cell i have an image, above it there is some
text with no
> preset
> width, .... so i might need to strech that cell's width
... when i do,
> that
> image below it keeps the same width and i can see some
white space on each
> side
> .... how do i make this image autofit the cell it is in
and make it
> stretch to
> the width of the cell whenever i adjust it to my
preferences.
>
> thank you for your help.
>
>

Similar Messages

How to load a tif image in flex

Hi All,
Is it possible to load a tif image in flex. If it's possible
anyone guide me or send me some code snippets regarding how to
display a tif image in flex.
Regards,
Dharma

"flexdharma" <[email protected]> wrote in
message
news:ga2d96$p8h$[email protected]..
>
Hi All,
> Is it possible to load a tif image in flex. If it's
possible anyone guide
> me or send me some code snippets regarding how to
display a tif image in
> flex.
Convert it to the much more web-friendly png format.

How do I use copyprofile, image manager and create a wim file to Sysprep a reference Windows 8 computer.

Im trying to deploy a reference machine (configured) to other machines (exact or close image) with different hardware.
I have successfully used sysprep in out of the box, generalise, shutdown mode although i havent tried to deploy this to another device. Unfortunately it doesnt copy the profile to default.
I understand that I have to create an answer file using image manager based on that image, save it to a usb drive and attach this in the sysprep command line when sysprepping it.
My problem is I dont know how to easily capture an image of windows 8 into a wim file so that i can add this into image manager to create a answer file. Im also not sure what I have to do in image manager, is it a simple matter of creating and saving
the answer file or do i have to configure it to copy the profile specifically (theres only one account anyhow).
I also want to know if i have to attach the drivers or are all the standard drivers put into the sysprep image as standard. I would like the machine to be an exactly replica, same as doing a clone (but with the drivers for the new machine installed
so it will boot) same as doing a clone and then repair? If thats possible.
Any specific instructions on this would be helpful. I have read the microsft links but they are somewhat confusing.

I know this is a very late response but I thought I'd post for others who search.
The easiest way to create the .wim file is via WinPE, this guy's two YouTube videos explain the entire process in detail -
Windows 8 ADK Part 1: Capture an OS image - https://www.youtube.com/watch?v=XJ8zKX_8E9w
Windows 8 ADK Part 2: Windows Image Deployment - https://www.youtube.com/watch?v=HHIvoqSw_FI
Here's a quick rundown from my notes:
WINPE
Create WinPE via imaging tools command prompt
copype amd64 c:\winpe
makewinpemedia /iso "c:\winpe" "c:\winpe\winpe64.iso"
UNATTEND
Open Windows System Image Manager
Configure unattend.xml
Save unattend.xml to sysprep folder
Create script and save it to sysprep folder to launch sysprep with unattend
@echo off
cd C:\Windows\System32\sysprep
Sysprep /oob /generalize /unattend:C:\Windows\System32\sysprep\unattend.xml
SYSPREP
C:\Windows\System32\Sysprep
Run as administrator
OOBE/Generalize
Shutdown
CONFIGURATION of WINPE
Set IP - netsh int ip set address "Local Area Connection" static 192.168.1.2 255.255.255.0 192.168.1.1
Set DNS - netsh int ip set dns name = "Local Area Connection" source = static addr = 192.168.1.4 validate = no
Map Network Name - net use z:
\\WindowsADK\reflex\images password /USER:domain.local\username
DISKPART
diskpart
list disk
select disk zero
list partition
select partition 2 (OS partition #)
Assign letter=S (assigns drive letter to partition)
Exit
DISM
dism /capture-image /imagefile:z:\image.wim /capturedir:s:\ /name:"Windows 8.1 Custom"
Verify image is saved in the image share (z:)
http://www.microsoftfanboys.com

How do i make an image pause in a flash movie clip

Please can someone help me. I am trying to find out how to pause or stop an image in a basic flash movie clip, after it has entered from one side and before it exits the other side.
I have been trying to work it out myself for three days but no joy. I am practicing for a test with a training agency which gave me a disk to use but nowhere in it does it say how this is done. I am also having a lot of difficulty making stop start buttons work with this movie clip. I am using a trial cs5.5 version of Flash which expires in 7 days so i need to know this soon. I am up to speed on most of the features, its just this one thing that has me stumped. A lot of the tutorials or examples i have found on the net are very long winded and hard to follow exactly. Could someone let me know, step by step the sequence i should follow after i have created an object and made it go from one side of the stage to the other.

Hi
Thank you for getting back to me. Yes i am using a timeline tween. I have an image on my stage which moves in from one side and out the other side. I am trying to stop or pause the image. The effect i will be asked to reproduce in my exam will be something very much like the banner on the website http://www,iactweb.com. If you go to this website you will see images arrive on the banner and pause before exiting the other side. I am fairly up to speed on all the aspects of getting this effect but i have forgotten what i learned during the course on how stop or pause the images. I am using the trial cs5.5 version of flash . Thanks again for getting back to me.

How do I substract an image at the time t with an image at t-1 to detect move in a grab acquisition

After the VI acquire in a grab acquisition, how do I substract an image at the time t with an image at t-1 to detect the movement in the scene?

Hello,
One way of doing that is to do a ring acquisition with two buffers. At anytime one of your buffers will be the most current frame and the other will be one before the most current. Having both buffers available at anytime in your code you can call IMAQ Subtract.
Hope this helps!
Yusuf C.
Applications Engineering
National Instruments

How to make an icon image using Photoshop

I found out how to do this recently so I decided that I wanted to make a tut for those who don't know how to make an icon image. This icon image is for the libraries tab on your computer. Under the libararies tab there is Music, Pictures, Documents, and Photos
First you will need the ICO (Icon image format) Format extension for photoshop which can be downloaded here:
http://www.telegraphics.com.au/svn/icoformat/trunk/dist/README.html
The download link and tutorial on how to install it is all in the link above.
Once you have that all set you can now launch photoshop to create your icon image. Once you have launched it, create a new document with the size as in the image below.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/256x256_zpsbf3dcf8e.png~original[/IMG]
Create the image you want. I used a simple one by using the custom shape tool by pressing "U" on your keyboard and with the
basic blending options.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/IconImage_zpsd788c709.png~original[/IMG]
The reason why the image is pixelated is because it is an icon image. Since the image is only 256x256 pixels when you zoom in on it that will get you the pixely result. The reason why I zoomed in is so you can see it. But don't worry this is no the end result. Just continue reading and you will see.
So once you have created the icon go ahead and press
file>save as>(under format choose the ICO)>and choose the name that you want to name it. And save it in your C: drive. You will see why to save it in your C: drive in a sec.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/SampleicoPic_zpsd252bfba.png~original[/IMG]
So now that you have created the icon and saved it now you can create the new library.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/NewLibrary_zps8ca703b2.png~original[/IMG]
Name the library whatever you want I named it "Sample" for tutorial purposes. Notice how it gives you a default boring icon image for your library.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Sample1_zpsb5472840.png~original[/IMG]
So now once you have created and named your library now it is time to get the icon image into place.
Go to computer/c: Drive/users/YOU/ And now once you have reached this area you will need to access a hidden folder named "appdata" to do so press "Alt" then a menu bar will show. Click
tools>folder options>and view. Find the option to view hidden folders then press apply then ok. Now we shall continue so AppData>Roaming>Microsoft>Windows>Libraries
Now you should see all the libraries including the one you just created.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/showhiddenfolder_zpsad4a3c94.png~orig inal[/IMG]
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Libraries_zpsf6243bc0.png~original[/IMG]
Once you have reached your destination then open a new text document with notepad and drag the library you just created in notepad. The result should look like this:
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Notepad_zps251a86f0.png~original[/IMG]
once you have reached this point click at the end of the second to last line down then press enter and enter in this information
<iconReference>c:\"NAME OF ICO FILE YOU CREATED IN PS".ico</iconReference>
Example:
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/iconreference_zps1c1a3eca.png~origina l[/IMG]
Once you have entered that information go to file>save and the icon image should appear on the library you created.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Finished_zps267f893a.png~original[/IMG]
Now you are officially finished. Go and spread the news and joy. Bye for now
-Dusty951512

It is Windows only because all those screen shots are exclusively Windows, the file structure and paths do not resemble those of the Mac in the least. As a Mac user, there's nothing I could take from your tutorial. Sorry,
No drives named with letters like C: on the Mac, for instance. No backward slashes either, ever. No such paths either. No "Notepad" on the Mac, we use TextEdit; but such a text editor is not remotely needed on the Mac to make and/or edit icons. Etc.
Those folders are not even called "Libraries" on the Mac… Nothing resembling your tutorial at all.
The icons in the Finder's Sidebar are not customizable at all in recent version of OS X.
= = =
You can edit any post of yours only until someone replies to it. At this time your post is not editable by you any longer.

How do I copy an image from pdf file using preview?

I've done this before from the same pdf file but can't remember how I did it. Does anyone know?

I tried that and heard the camera shutter go off now how do I retrieve the image? Where is it on my computer?
Where did you check?
Screen shots are suppose to be saved on your desktop. See KB Article: http://support.apple.com/kb/PH11229
If that is not where there are going, do a manual search. Check inside your Download folder for starters.

Java Application [Java Bundler]: how I can use an image? Which path?

Hi,
how I can use an image in my Java Application when I create the jar bundle with Jar Bundler? Which is the path of the file? I don't know if I got it across...

By image, do you mean an icon for your program?
If so, then you need to create the image you want using any graphical drawing program, then use a utility such as Img2icns to put the image into the correct format (.icns). Once you have this, you can drag it into Jar Bundler and IIRC it just works.
Bob

How do I spread one image across 2 pages?

How do I spread one image across 2 pages?

You can't with a single image, but you can "fake" it. Duplicate the image & then line up the two halves. It's easier if you are viewing facing pages two-up.

How do I display blob (image) in a Portal Report

I am using 9ias 10222 and portal 30983 and I have a table that stores an image as a blob and have a varchar field to store the mime type. I have created a form to upload the image and can then query the form to display the image.
How do I dislay the image in a Portal Report/Dynamic Page Component. I have followed note 68016.1 but the retrieve_img_data procedure does not work it gives a wwv-11230 error.
Any ideas? Any help would be appreciated.
Thanks
Belinda

Hi,
Can you display what code you used for this? I followed note 172045.1 and everything compiles properly but when I run the report, I just get a box with a red X in it, like it is not finding the picture. I ran the procedure that downloads the image and it works fine from there. Thanks.

How can you use one image and edit it three different ways to export later?

I am a new Lightroom 3 user. How can use the same image and edit it multiple ways to produce mulitple images to later export? For example, I have a picture of a bride and groom. I want to use that image and create a color image, a black and white image, and a close up of their hands.

Do I need to do either of those options before I start editing the image at all? For example, what if I am working on the image and doing some creative edits. Then I think of another option that I could do. Is it too late at that time or can I still get the original image to begin with?

How to create a background image for each item in a List object

Hello.
I am trying to create a background image that displays whenever a user posts something to a list. For example when a user posts text it would appear in a list. The new item in the list would contain a specific background image with the users text appearing on top of the background image. I do not want a background image for the entire list, rather each item within the list.
I am not sure how clear this is so I added an image below. When a user enters text in and clicks the "post-it" button their text would appear below with the sticky note background.
I am not sure which list type would be best for this problem or how to create insert the image, so I am open to suggestions.
Thank you for your help. Any advice or guidance will be greatly appreciated!

Hi
the easiest way would be with itemRenderer.
You have to do two things:
1. In your list declaration use a item renderer: <mx:List itemRenderer="myRenderer"/>
2. create a flex component myRenderer that will be the single item. This can be a canvas with a background image and a text field on it.
When you add a new item to the list, a new myRenderer item will be created and the data property will be passed to it. So you have to put "data" in your textField.
If you need more help try looking at Tour de Flex samples, they're pretty easy.
Andrei

How do I set the image size in PS touch to print to my Epson printer w ithout losing any of the picture. PS Touch appears to be showing pixels and not inches, how can I covert it toshow inches?

I am using PS Touch from my tablet . I am importinga photo from an SD card . When all editing is completed I then send it wireless from the tablet via Epson I print to the printer. It all works great except that part of the photo at each end is cut off and does not print. I am printing on 8.5 x11 paper.
How do I convert the image size in PSTouch frm pixels to inches?

Epson's iPrint has always been an oddball. It will always "zoom in" on an image to print even if you have the proper dimensions and resolution set for actual print size. I think other users have reported this, at least on Android.
You can't have PS Touch show inches instead of pixels at this time but you can use an online website to find out what you need to fit within a particular resolution. (Google "pixels to inches calculator".)

How can I delete the image in my e-mails?

I'm having difficulty deleting or changing the e-mail image that appears automatically in e-mails. I gather they appear on e-mails sent to other Mac Mail uses, but not otherwise. I'd like to simply remove the image. Yet even when I delete the image altogether using the edit image tools in Address Book, one of the stock images from Apple's library keeps showing up. Can I not have the e-mails appear without any image on them. I've poked around a bit with both Address Book and System Preferences, and wonder what the difference is between those two image functions. There are separate images for each user on my iMac, but I'm having difficulty figuring exactly how to manage and control those images in System Preferences and Address Book.
Can anyone point to Apple documentation that might help me?
No opinions, please.
Using

but cannot see how to simply delete an image.
As far as I know, there is no way to delete the image. I've not heard of a way to do so. It there is a way, someone may chime in; in the meantime, you might want to try checking out the "more like this" section on the right of the page.
No opinions means I'm looking for answers based on technical knowledge.
FWIW, you do know that these forums are user to user only? Some people here are tech experts and many others extremely knowledgeable, but not necessarily techs. We learn and share what we've learned.

How can i control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?

Sup buddies,
How can I control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?
As the project grows in size the load time increases. How does one control not loading all images ,divs,elements etc. until they're
needed on the timeline? For example some sections are off and only become visible when recalled. My projects slowly grow in size so loading
all images , is counter productive . My other option would be to create separate htmls but that breaks the seamless user experience .
TY...Over N Out...

hello, kiwi
quote: "Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?"
yes.
maybe,...
1. you might think of making DVD backups first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
or,
2. bring in the photographs to hard drive first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
the low rez Previews will stay in Aperture but the high quality Versions will be exported onto DVDs and gone from the hard drive (if you delete the originals).
another way would be to export small about 50-70 pixel wide high quality jpegs to a folder on your Desktop and import & keep these in Aperture Library as a reference. make metadata to show where the original Project DVDs are stored and DVD filing system used.
victor

How do i autofit an image ?????????

Similar Messages

Maybe you are looking for