How do i automate volume on an audio track??? why cant i figure this out.

in logic 8 i cant figure out how to automate volume for an audio track. With midi its fine i just use the hyper editor but with audio i just cant get it figured out. I want to mute the portions of a vocal track where there are no vocals.

Go to your key commands window and find out how
to view volume automation.
Then press that button and automate away.

Similar Messages

  • How can I increase the volume on an audio track imported from a GarageBand project, beyond the  11

    I have an audio track, mp3, originally recorded in GarageBand, but with an recording level set too low.  I've now adjusted the volume in the audio track to the max, but during playback it's still rather quiet.  I have to turn the volume on my Mac to the max to have it at an acceptable playback level.  Is the any why to increase the volume on that track any further?

    http://www.fcpbook.com/Audio1.html

  • How to revert to original, the extracted Audio Tracks with SoundBooth?

    How to revert to original, the extracted Audio Tracks with SoundBooth?
    I have installed the Adobe "MasterCollectionSuite-CS5"-ITA with PremiereProCS5 and SoundboothCS5.
    I made a few test with PremierePro Audio clips and used the option "Make a rendering and extract" with Soundbooth.
    I want know, after that operation:
    - Exists an option (a shortcut) to revert automatically the audio tracks from the extracted Soundbooth clips to the original audio footage?
    - In other words, I want return to the original audio timeline situation, prior to make the extraction with Soundbooth. Is it possible?
    - I know just one method:
    Click and drag the video clip from timeline and release the clip in the "Source"Monitor window. After that I can drag the video+audio at the same start-and-end point of the source and put it into timeline, at the same place...
    But with this method I loose the applied effects and transitions from the edited clips in the timeline...
    Exists another method?
    Thanks!
    Horsepower0171.

    Dear  <http://forums.adobe.com/people/Shai+Schcolnik> Shai Schcolnik
    After you have edited the Audio file in Soundbooth, you should:
    1)      Select the Original Footage in PremierePro > Project Folder
    2)      Select with RIGHT Click the Video+Audio Clip in PremierePro Timeline, and in RIGHT Click Menu choose “Replace/Substitute with clip” > “From Folder”
    3)      Now you can delete in PremierePro > ProjectFolder, the named Audio File “…_Extracted.wav” edited previously with Soundbooth!
    The new one is your original footage!
    Best regards!
    Dario Cavallo  (Horsepower0171).
    “3DC multimedia Productions”
    www.3dc.joomlafree.it
    Italy.
    Da: Shai Schcolnik [email protected]
    Inviato: lunedì 7 gennaio 2013 12:13
    A: Horsepower0171
    Oggetto: How to revert to original, the extracted Audio Tracks with SoundBooth?
    Re: How to revert to original, the extracted Audio Tracks with SoundBooth?
    created by Shai Schcolnik <http://forums.adobe.com/people/Shai+Schcolnik>  in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion <http://forums.adobe.com/message/4973889#4973889

  • We are recording 2 voices over an instrumental track. Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases. Is this fixable? We are using Alesis multi mix 8 with 2 microphones.

    We are recording 2 voices over an instrumental track. Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases. Is this fixable? We are using Alesis multi mix 8 with 2 microphones.

    Badger33rk wrote:
    Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases.
    turn the Ducking menuItem off

  • In version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

    in version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

    The switch is in the upper right of the viewer.

  • HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

    In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
    I've tried everything to get a custom umask set for all apps. It just seems impossible...
    Is there a replacement for launchd-user.conf?

    Please file a bug report: https://bugreport.apple.com
    I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

  • Seems I have a iClould account but not sure how I got it or how to access it on my iPad.  Any help in figuring this out would be appreciated.

    Seems I have a iCloud account on my iPad but not sure how I got it as I do not remember signing up for this feature.  I got an e  mail message saying I was running out for space on my iCloud and was given directions on how to find it on my iPad.  I followed the directions but there was no iClound anywhere in my iPad settings.
    Any help in figuring this out would be appreciated.   

    If your iPad is running iOS 5 or higher, iCloud would be listed in Settings.  If you are signed into an iCloud account your iCloud ID would be listed in Settings>iCloud.

  • When I updated my Iphone my naviogon app was erased, and I can't figure which one I had purchased. Does anyone have any ideals how I can figure this out.

    When I updated my Iphone my naviogon app was erased, and I can't figure which one I had purchased. Does anyone have any ideals how I can figure this out.

    App Store > Updates > Purchased > Not On This iPhone.
    Should be in the list.
    tt2

  • How can I figure this out?

    Very simple function, but as a beginner, it's still difficult for me.
    my mouse wants to detect boxes on the canvas and return the center coordinate of these boxes, how can i figure this out? The game will be, if point(x,y) is inside a box , return box Center

    I just noticed that you are placing them on Canvas and it is not a container object. One solution would be to keep track of boundaries of those clickable areas and whenever a click occurs, a check which box was clicked, if any. I hope this helped.

  • How do I get volume on my audio imports??

    I bought Final Cut Express yesterday and have tried to import music from Itunes into the program and I am getting zero volume when I preview the audio tracks in the preview window or when I lay it into the timeline. Is it because it is in mp4 format? I tried converting one of the tracks into the approved aif (?) format but still no volume. I am getting volume on my video tracks so I do not have a mute button pressed somewhere. Coming from imovie, I am not used to having this fussiness with audio format. Any assistance would be greatly appreciated.

    http://www.fcpbook.com/Audio4.html

  • How to change file name of duplicated audio track??????

    I option-clicked-dragged an audio track vertically to create a new track (the manual says to drag the track number but that doesn't seem to work - I dragged the single region). I created a new track name. I then dragged the new track to the right, so the notes are displaced. However, both tracks point to the same file (when I delete some audio in one track, the corresponding audio is automatically deleted in the other track - wrong behavior).
    How do I get the second track to be stored in a new file?
    Thanks

    this is normal behavior, option dragging makes a new region, but it still is using the same audio file.
    to create a new audio file out of the copy you can, from the audio menu in the arrange window choose "Convert regions to new audio files" this will turn it into a new audio file

  • Change volume for whole audio track

    Hi gang,
    I feel like I am missing something obvious ...
    I have a stereo background noise that recurs across my sequence. It is pasted into audio tracks A13 and A14 with crossfades between each occurrence. I want to fade the volume of all of them at the same time (i.e. all of the audio clips pasted into A13 and A14). If I select all of them by dragging a box using the mouse, it does not set the volume for all of the clips, only the last
    How do you change the volume for a whole track?
    Cheers!

    whats more, had you already manually adjusted some clips but not others and then wanted to adjust all the clips to the same level regardless of your previous adjustment then there's really no need to remove levels attributes, or redit etc etc ... you just follow the same steps posted above, choosing "Absolute" as the Gain adjustment - all clips regardless of previous levels will be set to the absolute level you specify.

  • How can I keep one of my audio tracks stationary when syncing multiple tracks?

    I am trying to edit a video that has external audio from an H4N recorder and internal audio from 2 Canon DSLRs. The internal audio is just there to help my sync everything and will be muted during output. From the H4N I have one long, continuous recording, but from the cameras I have shorter clips, not all of which happened exactly after the previous one.
    Here's the issue I'm having: when I sync the two video clips & the external audio early in the timeline, everything lines up (using the automatic synchronization based on waveform). However, when I am syncing clips later in the timeline, sometimes Premiere chooses to pull the external audio track FORWARD (thus bringing it out of alignment with the earlier video), rather than pushing the video tracks BACK (which is what I need).
    Is there some way to tell Premiere which tracks should and should not be moved during sync? If I lock the track, then I cannot use the sync function on it at all. I basically need a way to specify that one track should be used as the "anchor" and that others should be moved forward or backward as needed, without moving the "anchor" track.

    Cut up the 4n audio clip and synch it to its respective clips.

  • How do I control the number of audio tracks in an exported QT movie?

    I am at a loss. I have 59.94 fps DVCProHD files that I want to trim and to export in the same format. The original clips have two tracks of audio, but the exported tracks have eight tracks of audio. I normally use an 8-track audio card, but nothing I do seems to prevent the 8-track export: I have selected "stereo downmix" in the audio mixer tool and set the audio playback device to "Built-in Audio," to no avail. I want the exported files to have the same two audio tracks as the original, not two plus an empty six. There seem to be no controls that allow me to specify this. Can anyone explain to me what is going on and how to change it?
    Thanks.
    I am using FCP 5.0.4
    G5 Dual2.7GHz   Mac OS X (10.4.5)  

    Hello Robert,
    It might be that your sequence is set to output 8 channels. try this...
    Go to Sequence>Setting> and go to the 'Audio Outputs' tab. Here, change the 'Outputs' to 2.
    You might also want to check the track-assign buttons on the timeline, ctrl+click on the auto assign square (just to the right of the little padlocks) and go to the Audio Outputs. Check that each track is assigned to 1&2.
    J

  • How Do I Get Rid of Unwanted Audio Track?

    I am bringing DPX files into Photoshop as Image Sequences. Afterwards, I am using Export…Render Video, set to Adobe Media Encoder, H.264.
    The resulting H.264 files have an AAC audio track (presumably, with nothing but zeros, because there is no audio with this material.) How do I prevent Photoshop from adding an audio track?
    I don't see a way to delete the audio track from the timeline. I don't see a way to export only video in the Render Video settings.

    Mylenium, thanks for bringing that to my attention, because it didn't occur to me.
    However, it brings up a different problem. In the Adobe Media Encoder, Create Preset settings, I don't see a way to set it to a custom frame rate, such as 16 frames per second, if I want to use the MPEG4 wrapper.
    One of the reasons that I am bringing these DPX files into Photoshop in the first place is so that I can do this:
    Attempting 16fps Video From Regular 8mm Films
    http://www.filmshooting.com/scripts/forum/viewtopic.php?f=1&t=23340

Maybe you are looking for