How do I automatically apply preset by camera and ISO?

I'm using LR 4. I would like to set up noise reduction / sharpening presets for my cameras by ISO (for RAW images only) so that when I import the photos the correct ISO preset is applied. I swear that I used to do this back in LR2 but I cannot remember how to do it anymore. Can someone point me in the right direction?

Turn on "Prefs>Presets>Make defaults specific to ISO".
Reset on photo and sjudt its NR and sharpening.
In Develop module, Develop>Set Default Settings...

Similar Messages

Where? is the Default Presets, By Camera, By ISO?

Where? is the Default Presets, By Camera, By ISO?
Looking at where I would "think" it is ... where my Develop Pre-Sets are , that I created. But, I cannot find the Path on my HD to copy these and bring over to my Laptop.
* I would hate to have to do these manually again
Thank you,
HG

Aloha and Thank you Dorian ... again for your reply,
In Win7 64- bit
From your reply ... this is the path:
C:\Users\USER NAME\AppData\Roaming\Adobe\CameraRaw\Defaults
Thank you, Worked like a charm ... copyed the Files (even though they are not descriptive like the Develop Pre-Sets are , as files)
HG

Lightroom 4 automatically applies presets to all imported pics - How to deactivate that?

Hello
When I'm importing pics in Lightroom 4 (no matter if RAW or JPEG files) all picture get automatically convertet into B/W and some grain etc. is added - I guess an preset (BW Nr 4) is applied automatically to EVERY pic I'm opening.
How could I solve that problem?

In the <Import Dialog> on the right side in the panel <Apply during Import> make sure that <None> is selected.
If you only see the small Import Dialog you have to expand it to see <Apply during import> by clicking on the small triangle in the bottom left corner of the dialog box.

How do you Automatically Copy Images From Camera?

I would like to create an AppleScript that will run when I plug in my digital camera. Here is what I cannot figure out.
How to make it run when the camera is plugged in.
How tow to copy images from camera to a designated folder.
Thanks!

You can do all you requested - without 'AppleScript'.
01. Connect your camera launch 'Image Capture' ('/Applications/' folder - if it does not automatically launch.
02. Select the 'Image Capture, Preferences...' menu item.
03. Click on the 'General' tab.
04. From the 'Camera:' 'When a camera is connected, open:' pop up menu - select the 'Image Capture.app' menu item.
05. From the 'Devices' menu select your camera from the menu items list. A window will appear with the title of your camera.
06. From the 'Download To:' pop up menu select where to save the camera's photographs. You can select any folder anywhere on your hard disk drive(s).
07. Click the 'Options...' button, and from the drop down sheet click on the 'Connection Options' 'Automatically download all items' check box - to add a check mark. There are other options you may have be interested in.
08. Click on the 'OK' button.
09. If you want to download the photographs now - click on the window's 'Download All' button. Or, to test the above setting changes - quit 'Image Capture' and disconnect your camera. Then reconnect the camera - and watch the above setting changes take effect.
Note:
The above automatic action can also happen if the storage device of the camera were inserted into a USB digital camera card reader. So long as apply the Steps above, and you select the USB digital camera card reader from the 'Devices' menu's menu item list in Step 05 above.
'Image Capture' is not scriptable; but, may be control-able via 'tell application "System Events" to tell process "Image Capture" ....
When a camera is connect to the Mac, the storage card of the camera is mounted onto the 'Desktop' and also listed, as an alias, in the (invisible) '/Volumes/' folder.
Now that you know the name of the storage card ... you can create a 'Folder Action Script' (an example is presented below) and save it into the '/Library/Script/Folder Action Scripts/' folder,
Open the '/Volumes./' folder (in 'Finder' via 'Go, Go to Folder' - enter '/Volumes/').
Perform a right button click ('<control> - click, for single button users) on the 'Volumes' folder's window, and select 'Enable Folder Actions' (if not already).
Rpeat the right button click (<control> click) and select 'Attach a Folder Action...' - selecting your script ('Volumes_FAS.scpt' as shown below).
Below is a 'Folder Action Script' example - where you will have to substitute 'NO NAME' with the name of your digital camera's storage card's name.
-- --- Save code as a script with the name 'Volumes_FAS.scpt' --- --
on adding folder items to this_folder after receiving added_items
set myStorageCard to "NO NAME" -- The name of my 1 GB stroage card. The name of your card may differ.
repeat with i in added_items
tell application "Finder" to set tName to (name of i) as string -- Obtain name of mounted storage card.
if (tName is equal to myStorageCard) then my handle_card(i) -- If my storage card, continue processing.
end repeat
end adding folder items to
on handlecard(localVolume)
set folder_Path to ((path to desktop folder from user domain) as string) -- Path to 'Desktop' folder.
set download_Folder to "NO_NAME Photographs" -- Name of folder to store storage card's items (files and folders).
-- create download_Folder, if it does not exists.
tell application "Finder" to if (not (exists folder (folder_Path & download_Folder))) then make new folder at (folder_Path as alias) with properties {name:download_Folder}
-- Duplicate all the items (files and folders) of the storage device to the '~/Desktop/NO_NAME Photographs' folder.
tell application "Finder" to duplicate items of local_Volume to (folder_Path & download_Folder) as alias
end handle_card
-- --- End of code --- --
Review 'Finder's dictionary (in 'Script Editor') for the various ways to incorporate 'duplicate ...'.
Mac OS X (10.4.4)

How do I delete a preset in camera raw 5.3

Hi
Anyone know how I can delete a preset I have made in camera raw 5.3

ravalde01 wrote:
Hi
Anyone know how I can delete a preset I have made in camera raw 5.3
In windows with the standard setup, the presets are in this folder:
C:\Documents and Settings\username\Application Data\Adobe\Camera Raw\Settings,
where username is the user logged on to the computer.

How can I shut off built in camera and use another one?

I'm trying to use one of Apple's older auxillary cameras to shoot auditions.People will sit on the other side of my computer.
I plug it into my Imac, but the system doesn't recognize it and I continue to see only
myself. How can I turn the other camera on?

harryfromrichardson wrote:
...the system doesn't recognize it ...
How can I turn the other camera on?
With the external (Firewire) iSight connected, (do not chain external iSight with other Firewire devices) if your  > System Profiler > Hardware > Firewire does not recognize the external iSight, use the suggestions here to test whether your old iSight is still functional:
http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
Once your system recognizes both cameras, be sure to rotate the ring at the front lens cover of the external iSight clockwise to turn it on and open the lens shutter.
With more than one working camera recognized by your system, most camera-capable applications have settings that allow you to choose which camera to use. However, they do not all work the same way. For example:
• iMovie 9 ('11) uses a choices bar in the "Import from Camera" window:
More info: http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
• For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
• Photo Booth uses the Photo Booth > Camera menu command to select which camera to use. Remember, camera choice for any app will be available only if more than one working camera is recognized by your system. With only one camera, the choices will not be visible.
• For FaceTime,if your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
• QuickTimeX uses Preferences to select between connected cameras.
QTX video Preference settings are visible only when you have a new video recording window open. The image below shows how to access QTX video Preferences from an open video recording window:
Note that only one webcam (iSight) is shown in this image because I had only one camera connected to my Mac at the time. When more than one compatible camera is connected, you will see the additional camera name and can select it in this menu.
• For cameras connected via Flash browser plugins, control-click on an open video window and adjust the camera settings to select between a connected USB and Firewire video camera:
http://www.macromedia.com/support/documentation/en/flashplayer/help/help04.html
• For other apps, check the app's menu items or Help to find out how to select between connected cameras.

How to Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER in VC++ ?

Hi,
I have : - IMAQ1394 2.0.1
              - NI Vision 7.1
In VB, I can Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER :
    Dim Image0 As New CWIMAQImage
    imaq1394SnapCW(sid0,Image0)
    CWIMAQViewer1.Attach Image0
Now,How can I do this in VC++6.0?
    I tried:
              C_CWIMAQImage m_imgViewer1;
              m_imgViewer1 = m_CWIMAQVision1.CreateCWIMAQImage();
              m_CWIMAQViewer1.Attach(m_imgViewer1);
              imaq1394SnapCW(Sid,m_imgViewer1); <--there is no "imaq1394SnapCW "function in VC++,why?
    Please help me!
    Thank you!

For people looking back at these old posts regarding
CWIMAQViewer - it was not made to be used in the C environments and is made
for VB.
Refer to the following locations for displaying images in C
environments:
Start»All Programs»National Instruments»Vision»Documentation
Start»All
Programs»National Instruments»Vision»Text Based Examples
Make
sure that you look at the examples and documentation that is in
reference to the C environments not the VB environments
Vince M
Applications Engineer

How to configure automatical startup of both ASM and Database

I created a ASM and a database that uses this ASM for file storage management. I also edit the /etc/oratab file as followings:
+ASM:/u01/app/oracle/product/10.2.0/asm:Y
orcl:/u01/app/oracle/product/10.2.0/db_1:Y
However, when I reboot the system, both ASM and database instances cannot be started up automatically.
How can I configure automatical startup of both ASM and Database at system reboot?
Thanks in advance!

try the following
Create file called startdb.sh in $ORACLE_HOME/bin and put following line into startdb.sh and
change the permission of the file with following command.
$vi $ORACLE_HOME/bin/startdb.sh
su - oracle -c 'sh /oracle/product/10.2.0/db_1/bin/dbstart'
Please replace /oracle/product/10.2.0/db_1/ with your ORACLE_HOME
$chmod 777 $ORACLE_HOME/bin/startdb.sh
Open /etc/inittab file and append following two lines in /etc/inittab.
h2:35:once:/etc/init.d/init.cssd start >/dev/null 2>&1 </dev/null
h3:35:wait:/oracle/product/10.2.0/db_1/bin/startdb.sh >/tmp/stdb.out 2>&1
If you have h2,h3 in the inittab file please feel free to change it to h4,h5 or whatever is unique, but it has to be unique name
Please replace /oracle/product/10.2.0/db_1/ with your ORACLE_HOME.
Reboot machine and check out whether both instances are getting started or not.Please check $ORACLE_HOME/startup.log for more information.
rgds
alan

How to modified automatic batch number with plant and current year details

hi all,
i want tomodify automatic batch number with plant and current year details. if any one understand plz explain.
thanks,
radhakrishna.

Hi,
I am not clear what is u r requirement exactly?
I mean you don't want automatic batch no or modify the batch no. with plant means and Current year details means. Can give details more
Regards
Ganesh

Entering camera and ISO info

I know that there has to be a simple answer to this, but I can't find it on the forum or in the Aperture manual. (I hope that isn't a harbinger that apparently-simple has little to do with reality).
I'm scanning in old slides and want to add the camera and film speed info to the metadata. All the camera and film fields seem to be locked and there are only a few fields I can edit. How do I do this?
TIA, Steve

True, but one can look at it from the opposite side. The EXIF standard was created because people wanted metadata about an image attached to the image and that info could be easily provided by digital cameras, not because digital cameras demanded that something be created to handle their info.
I appreciate that part of the locking may be because of an interest in preventing someone from 'faking' the metadata, but a technically astute person who wanted to do so can easily add false EXIF info. A reasonable compromise would be for Aperture to lock this metadata for those images that DO have digital camera metadata attached, and not lock it when there is no such metadata so the rest of us can add that info.
While I'm griping , I'd also like to be able to add custom metadata fields (such as the film type I used) to the EXIF core. As far as I can tell, Aperture lets one make custom views of the metadata, but not create custom metadata fields. Does anyone have a good way to handle that info? I've been storing it as a keyword, but that's pretty clunky.

How do I stop organizer to automatic import everything from camera and card readers?

I want myself to decide what and when something shall be added to organizer.

Hi,
You don't say which version of elements you are using or which operating system you are running so I'll give some general answers.
Go to Edit -> Preferences -> Camera or Card Reader and change the Download Option to Advanced.
Now when you get images from the card, it will display a preview of each image and you select/de-select each one before telling it to download the selected ones.
If you can't turn on the advanced dialog, your screen depth in pixels may be too small.
If you don't want the downloader to be started when you insert the card then the operating system needs a tweak.
The other thing to look at is watched folders, you may want to turn the facility off.
Brian

How to create automatically users&roles in CUA and in chlid systems?

Hi,
i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training).
i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the same time to create autmatically a roles in CUA and R/3 chlid systems for those users (we sppose that the role is already stored in a table).
are there any standard BAPI or Funcion modules that can do this job?
is the role created automatically in CUA can be seen automaticall in the portal child system?
any help?
Thanks&Best regards

You can use one of the various ways Java EE provides you, e.g. container managed authentication.
It's also all in the Java EE tutorial: [http://java.sun.com/javaee/5/docs/tutorial/doc/bncas.html].
You can configure it in the application server as well: [http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html].
Here is an example how to use it in JSF: [http://ocpsoft.com/java/acegi-spring-security-jsf-login-page/].

How to generate automatically email to SAP user and Non SAP User

Dear Expert,
My client want a report on each Monday on sales/purchase detail of his/her particular email ID which is automatically generated from SAP DB.
Some are SAP user that we can do it by alert message but for some who are not SAP user how to send them a email ?
Can we do in SAP B1 ?
even i try with Outlook but I am not getting.
*please give me answer in detail
Thanks
Kevin

any update ?
I have create a query and a common output is share to all user, is it possible to group the output and share to particular user ?
Our client req. is particular sales man should get evry monday morning his outstanding amount from client ?
My query give the entire all sales Outstanding and send to all user all detail....i want to filter A user should only get detail A outstanding ?
Thanks
Kevin

How can I get access to my camera and camera library in iphone from muse ?

I basically need the user on the mobile site to access there camera library from phone and send video from thier camera library to an email address .

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

How do I automatically log the battery percentage and time on my Retina Macbook Pro to an excel spreadsheet? (OSX 10.9.4)

Hello! So I own a 13" rMBP, and I'm running OSX 10.9.4.
How do I log my battery percentage with the date, probably down to the hour, preferably to an Excel file?
I want to track the rate at which my battery discharges, so that in the future I can compare the present rate of discharge with the past and see exactly how much my battery has deteriorated by. I'll take averages over long periods of time to account for, e.g. the fact that watching Netflix drains my battery faster than editing an essay. I also want a solution that uses negligible power in the background.
I've spent hours looking for an app that both calculates the rate of discharge and keeps all data, but I haven't found any. Eventually I decided that hopefully it isn't too difficult to write an AppleScript or something that simply logs the system clock and battery percentage in tandem every hour or so.
Thank you for your time!
Herman

What Barney said.
Here is the script to create a CSV text file with
Date
Time
Current Battery Percentage as an integer
#!/bin/bash
batterycsv="$HOME/battery.csv"
export GREP_OPTIONS="--color=never"
# if you want the percentage sign too, exclude the second egrep
battpct=$(pmset -g ps | egrep -o "(\d+)%" | egrep -o "\d+")
datetime=$(date "+%Y-%m-%d %H:%M")
printf "%s,%s,%s\n" $datetime $battpct >> $batterycsv
Output on a fully charged MacBook Air to battery.csv will be individual lines of the following format:
2014-08-09,19:49,100

How do I automatically apply preset by camera and ISO?

Similar Messages

Maybe you are looking for