How do i automatically start the next slide after the video on the prevues slide is finished

I have slide 1 with a video loop witch tranistion to the next on a click. the next slide (slide2) automaticlly starts plays. I want to know how to start Slide 3 automaticlly after the video on slide 2 is done playing. Slide 3 is also on a loop. and start slide 4 on a click. then repeats......  

I once had the same problem, but it was worse because the length of the video was more than the maximum delay that could be set (Keynote'08, I do not know if this changed in '09). I was helped by someone of this community. She suggested adding invisible text fields, each having a delay, sequenced one after the other. Together they added up to a sufficient delay to play my video and go to the next slide after that. I hope this information will be of use, if need arises.

Similar Messages

  • My iPod wants to play music half way through one song and then start the next one, or pick up in the next song were the first song was at.  How do I fix this?

    I've had it for the past few days that when I have a album playing it will play a song half way through and start the next one, however it still shows the first song name and the time that is on there.  I don't know weather it's just a glich in the iPod itself or if there is something wrong with it all together.   I've never had this problem up until a few days ago, and I really don't know what to do about it.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • How do I stop automatic loading of the next page as I scroll to the bottom of an internet page that has a number of pages?

    When I search with Google, as I scroll to near the bottom of the page, the next page of results automatically loads. I can never get to and use the similar searches, or "Searches related to ***", which are at the bottom of the page, as the next page loads and focuses at the top of that next page. Also, there is a bar with the page number, and a field with a "Jump to" command with a pop down arrow with page numbers, and up and down arrows beside it which go up or down one page if used.
    This does not happen with, say, Bing, nor if I use Int Expl (aagh).
    I have no autopage type of add-ons, or plugins.. I may have had an add-on at one time. There are a bunch of autopager "strings", or lines, in about:config. How do you remove them, if that is the problem?
    How do I stop this from happening? It is extremely annoying.
    Thanks,
    SK

    hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • How do I set up iTunes to automatically move on to play the next album after the last one has finished? (in Album view)

    How do I set up iTunes to automatically move on to / play the next album after the last one has finished? (in Album view).
    This used to happen automatically in Genre view.

    Hi Henryhippo,
    If you have questions about play order in iTunes, you may find the following article helpful; I believe you can use the Play Next or Add to Up Next to add albums as well as songs.
    iTunes 11 for Windows: Ways to play songs
    Regards,
    - Brenden

  • VMM 2012: How to Configure Automatic Start and Stop Actions for a Virtual Machine?

    Does somebody know how to confgure Automatic Start and Stop Actions for a Virtual Machine in VMM 2012?
    I miss that option.

    Automatic Start or Automatic Restart actions are available for virtual machines running on a Hyper-V cluster from within Virtual Machine Manager.
    From within Virtual Machine Manager, bring up the Virtual Machine's properties:
    Click "Hardware Configuration"
    Click "Availability"
    Click "High", "Medium", or "Low" to enable automatic start/restart or
    Click "Do not restart automatically" to disable automatic start/restart
    Screenshot from VMM 2012 for a VM running in a Server 2012 R2 Hyper-V cluster:
    VMs running on a cluster have to be marked "Highly Available" and logically, Microsoft assumes that you'll want these VMs to be running all the time when this setting is selected.  If the cluster fails or needs to be restarted, you can set the priority
    by which a VM restarts, or you can set the VM to not restart at all when cluster services are restored by using the settings above.

  • How i can automatic start WLS_Forms WLS_Report & Web Logic Server?

    How i can automatic start just like oracle (auto start /shtudown through windows)

    I would write a batch file and use the Windows Startup to call it.
    I would probably include a check or delay in it to allow NodeManager to be available before I tried to start the AdminServer.
    My shop is Unix so I don't have an example.
    You also might be able to do it as a service and this may help:
    http://download.oracle.com/docs/cd/E13222_01/wls/docs81/adminguide/winservice.html
    Best Regards
    mseberg

  • When I edit a song in itunes (i.e change the year) on purchased songs, the next time I return to itunes, the information has reverted back to the original information. How can I change that?

    When I edit a song in itunes (i.e change the year) on purchased songs, the next time I return to itunes, the information has reverted back to the original information. How can I change that?
    When I purchase ITunes music, and it is a song from a Greatest Hits album, the Year of the song shows the year the CD was released and not the year the song was released (i.e. a song may be from 1986, but the Greatest Hits album was released in 1999, so my songs in ITunes show 1999).    So, I go into each of those songs and change it to the year that I want to be displayed. As long as I don't exit out of ITunes, it will show the year that I changed it to (i.e. the 1986 year in this case). But if I exit out of ITunes and then return to ITunes, the year reverts back to 1999. The same happens if I change the genre of a song from, say 'Pop' to 'Alternative', it will revert back the next time I log in.
    Oddly enough, as soon as I right-click on that song to change it back, the year/genre that I had entered returns.
    How can I make it so my changes are permanently displayed as I want them?  This is pretty annoying when I try to find a song on my Ipod under a certain genre, but it doesn't appear in that genre because the incorrect information gets synched to the Ipod.

    Make sure that these two options in Edit > Preferences > Store are turned off:
    Then exit iTunes and open it up again.  Your metadata entries should then be persistent - with these options checked iTunes will be comparing what you have with the information held in the iTunes Store, and will overwrite with the latter for Store purchases (and if you have iTunes Match).  If you have any iOS devices you should also turn off Show All Music under Settings > Music.

  • Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

    Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

    This looks like a change of behaviour in iTunes 12. Once songs are queued up to the Up Next list then they play whether ticked or not. If you want to skip certain songs already queued click the Up Next tool, then click the small X to the left of the song that appears when you hover over it.
    tt2

  • When emailing from iPhoto, the recipients address comes up incorrect, even though it is correct in both my email accounts.  How do I edit it?  I have changed it, but the next time it appears it contains the same errors.

    When emailing from iphoto with a template, the recipients' address comes up incorrect (a couple of letters are wrong).  The addresses are correct in both my email accounts, including the one I am using for the iphoto email.  I have corrected the address prior to sending the email, but they come up with the same errors the next time I choose them in the iphoto 11 program.  How do I correct thes email addresses?  thank you

    In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account.  The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
    Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
    Ernie

  • All of a sudden all of my tracks are squeezed to the left. The Bar Ruler begins at "1" with the next measure at "129" on to the thosands. How do I get back to my original count and un-squeeze my tracks? thank you. John

    All of a sudden all of my tracks are squeezed to the left. The Bar Ruler begins at "1" ith the next measure at "129" on to the thosands. How do I get back to my original count and un-squeeze my tracks? thank you, John at [email protected]

    Welcome to Discussions - the fact that the S.M.A.R.T. status is not recognized and the flashing questions mark appear seem to indicate that your hard drive has failed. If you have access to TechToolPro or Disk Warrior, try to use them to check the drive status. This will likely not work, and I'm afraid your disk is toast.
    You could try to remove the drive and put it in an external case and try to mount it on your MacBook, but I don't hold out much hope for that either. You can try using [Data Rescue|http://www.versiontracker.com/dyn/moreinfo/macosx/211375] to retrieve your data.
    You can also take it in to Apple and see what they say. Please let us know how things turn out,

  • [Urgent] How to let FileAdapter to read next file after a customized period

    Dear friends,
    We are using SOA Suite 11.1.1.5 and use FileAdapter in BPEL Process to read files.
    The file adapter in BPEL Process need to handle 14 inbound different files every batch time. And we want to let File Adapter to start reading next file after every 5 minutes. How can we achive this?
    We tried the MinimumAge and SingleThreadModel properties, but seems no use.
    Thank you in advance.
    Regards,
    Tony

    Hi Tony,
    I think this can help you. Set the following JCA property in File/FTP Adapter .jca file. This will restrict the max no. of files to be read every polling cycle. Set the polling frequency to 5 mins.
           <property name="MaxRaiseSize" value="1"/>Let me know if any problems.
    Regards,
    Neeraj Sehgal

  • After updating to iOS 6.1.5 on my iPod Touch 4th Gen, Some of my songs are skipping to the next song after 30 seconds of play...

    After updating to iOS 6.1.5 on my iPod Touch 4th Gen, some of my songs are skipping to the next song after 30 seconds even though the iPod appears to be playing the current song. Some of my songs are mp3 files that have been playing fine for years...
    Anybody else experiencing this issue?
    I'm using the latest version of iTunes and i don't have that problem on my PC. The only difference as far as i can tell is the updated iOS & firmware...
    AJ

    Yes, other have. If the songs play OK in iTunes on the computer
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Making the "next" button inactive until video ends

    I am new to Captive and have downloaded the trial version to test out to set up an e-learning module.  I have managed to create my first quiz and was able to get it to work fine.  I used one of the pre made templates and I inserted a flv video.  The user needs to watch the video prior to taking an exam, but the way it is set up the next button is visable and active the entire time of the video.  I discovered where you could modify the time before a button appears, but the user can get around that by hitting the pause button and waiting for the elapsed time to expire.
         How do I set up the program so that the user has to watch the video in its entirety and only after the video is complete, they can proceed with the quiz.  Thanks.

    OK, after searching and googling, I think I may have found the answer.  I found a hiding and showing action function, I  will see if I can hide the next button until the video ends, at which point it will appear.  I'll give it a shot and see if it works.

  • After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

  • Every time I sync my iphone 4 with itunes my ring custom ring tones change.  I have 7 custom ring tones in itunes.  One time it will load 1 custom ring tone the next it may be 3 then the next it is one again.  The last time it gave me 4 of the 7.

    Every time I sync my iPhone 4 with iTunes the number of my custom ring tones change.  I have 7 custom ring tones listed.   The first time it will load 1 of the ring tones and the next time it will load 3,  The next time it will be back to 1.  If I have assigned one of the custom ring tones and it does not get loaded it goes back to the ring tone that came with the phone.  The last time itunes gave me 4 of the 7 so I have not tried to sync it again.  I am using iTunes 10 (10.4.10), and windows 7.
    Has anyone else had this problem??
    Any ideas to what I need to do??

    Have you ever had all 7 of them synced before? Are these ringtones you made yourself? Is there a chance they could exceed 30 seconds in length? Is there a chance you have moved the original file location on the computer? May need the answers to a couple more questions to try and determine an answer.

  • What is the next step after editing or triming a video ? What type of file format to save and what to do after that ?

    what is the next step after editing or triming a video?
    what type of file format should be save and what to do after that?

    In the early days of digital video editing, an export render could take hours!  Not many applications are as hard on system resources as video editing, and rendering the final edit is probably the most system intense action of all.  
    Head on over to the Premiere Pro Hardware forum to see what sort of computer hardware the pros use for NLE (non linear editing), or to the PPBM5 site for a better look.
    PPBM5 Benchmark
    Also check out the specs on the Video Guys website

Maybe you are looking for

  • Problem in recover physical standby database(Data Guard) by rman

    Hello to all I have created a physical standby database ,I want make backup of it by rman and when I lose it's datafile I can restore it ,making backup and restore is fine but in recovery I encounter some problem scenarios is follow 1- In rman I crea

  • How to make menu/list (form) item open in it's own window instead of blank one?

    Items in a form (list/menu) that I've created are opening in a blank window (pop-up) when clicked. I would like them to open in "self" mode so that pop up blockers on various computers don't become a challenge for site visitors. Can anyone please tel

  • Having problems with Transparrent Spot Colour gradients Ai CS4

    I would like to know how to make the spot colour transparrent on one end of the gradient tool. Have been fiddling with the gradient opacety when the one spot colour is white but I  get a "grey" area between the 1st spot colour and 2nd spot colour (be

  • How to change iCloud address

    I registered my iCloud account with an email address I no longer have access to.  How do I update the account with my current emailed address?

  • TS3367 Trouble With FaceTime On iPad Mini

    I have a new iPad Mini.  I have turned on FaceTime in Settings and loaded new contacts who have existing iPads of iPhones.  When I try to connect with FaceTime, it gives the message that "FaceTime is turned off in Settings.  Do you want to turn it on