How do I avoid the "can't save to disk" notice when updating LION?

I've tried to update Lion 3 times (through Software Update) and after 2 hours of downloading it gives me a notice that it can't "save to disk." I have 80 gigs available on my harddrive so I don't know what I'm doing wrong. Please HELP!

Thanks for showing an interest… But!
I have tried all the regular stuff. This problem only showed up in OSX Lion. Up till then all was well at Snow Leopard and Adobe CS5.5 Suite. After upgrading to OSX Lion all Hell broke loose. Quite a catastrophe of conflicts. In Design wouldn’t launch. A problem with Suitcase Fusion 4. But PS CS6 had two major problems. One the Epson Artisan 835 could not be seen in Imports. A conflict between 32 and 64 bit formats and again, drivers. But the most persistent and perplexing problem has been that of the preferences. Oh and one other thing, whenever you quit the program, PS CS6, a message appears saying that the program has quit for no good reason and did I want to send a report to Adobe and/or Mac. Well I must have sent them a thousand reports. What I most suspect is file damage and incompatibility. What I have tried has not found the files to replace those that will reset themselves. i.e. .plst etc. without buggering up the works. I have tried to figure out what might have caused such changes between Snow and Lion other than the well known differences regarding supported stuff, formats and out of date software i.e. Rosetta. Some how or other I suspect damaged files. The kind of damage where a single character is missing and nothing works but no file checker in the world can detect as screwing up the works. Now in several cases a lot of re-installation has been done. But again no help. So putting a finger on the culprit file(s) has not been easy. Fortunately this machine has four active drives so reverting back to where all was OK is easy. But as for going forward, well that is at a standstill.
So, if any body out there has any insight to these three problems I would be most interested to see what you got.
Many Thanks

Similar Messages

How do I get the iCloud to save and sync and upload info from both the devices on my account. Right now I can only do one

How do I get the iCloud to save and sync and upload info from both the devices on my account. Right now I can only do one

You must put each device on the Verizon cloud.
Not both lines on one.
Go and set up a my Verizon account for the second line and you will have Verizon cloud service on that line.
Oh the term "icloud" is a trademark of Apple Inc. Verizon is not Apple.
Good Luck

How we cn avoid the sequence in remote tables through global temporary tabl

Hi,
We have table xx_interface_qualifiers in the remote db and we are inserting the data like this and its on a loop
INSERT INTO xx_interface_qua
(interface_id,
list_line_interface_id, excluder_flag,
qualifier_context, qualifier_attribute,
qualifier_attr_value, qualifier_precedence,
comparison_operator_code, start_date_active,
end_date_active, list_header_name, list_line_no,
creation_date, created_by, last_update_date,
last_updated_by, interface_attribute1
VALUES (xx_interface_qua_s.NEXTVAL,
ttt, 'Y',
xxx, xxx2,
xxx3, xxx4,
'=', SYSDATE,
NULL, xxx4, -1,
SYSDATE, '-1', SYSDATE,
'-1', 44 );
We are trying to avoid the hitting of the database every time for a sequence and try to implement the global temporary tables,i mean to say 1st we need to insert the data to TEMP table and then from temp table we cn inseert all the data to xx_interface_qual in a single shot to improve the performance.
But how we cn avoid the sequence in this case as we do not know the sequence in remote side.
Please suggest any other way to improve the performance.
Regards
Das

797846 wrote:
We have table xx_interface_qualifiers in the remote db and we are inserting the data like this and its on a loop
We are trying to avoid the hitting of the database every time for a sequence and try to implement the global temporary tables,i mean to say 1st we need to insert the data to TEMP table and then from temp table we cn inseert all the data to xx_interface_qual in a single shot to improve the performance.
But how we cn avoid the sequence in this case as we do not know the sequence in remote side.Does not make sense. I/O is the slowest database operation.
You have an unknown performance problem (that you claim is due to a sequence, but failed to provide any evidence for). Now you want to create more I/O, by writing the data twice. Once into a temp table and then again into the destination table. And do that in order to increase performance?
I do not see how this can solve the underlying, and unknown, performance issue that you claim exists.
Any problem solution needs to start with correctly and comprehensively identifying the problem.
You cannot solve a problem without first knowing WHAT the problem is.

How do I get past, "Can't save preferences message" in PS CS6?

Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.
Get me past this message. Please! Nothing I have read applies exactly to eliminating this infuriating message. How do I get past, “Can’t save preferences message” in PS CS6?
Message was edited by: RustyBucket12

Thanks for showing an interest… But!
I have tried all the regular stuff. This problem only showed up in OSX Lion. Up till then all was well at Snow Leopard and Adobe CS5.5 Suite. After upgrading to OSX Lion all Hell broke loose. Quite a catastrophe of conflicts. In Design wouldn’t launch. A problem with Suitcase Fusion 4. But PS CS6 had two major problems. One the Epson Artisan 835 could not be seen in Imports. A conflict between 32 and 64 bit formats and again, drivers. But the most persistent and perplexing problem has been that of the preferences. Oh and one other thing, whenever you quit the program, PS CS6, a message appears saying that the program has quit for no good reason and did I want to send a report to Adobe and/or Mac. Well I must have sent them a thousand reports. What I most suspect is file damage and incompatibility. What I have tried has not found the files to replace those that will reset themselves. i.e. .plst etc. without buggering up the works. I have tried to figure out what might have caused such changes between Snow and Lion other than the well known differences regarding supported stuff, formats and out of date software i.e. Rosetta. Some how or other I suspect damaged files. The kind of damage where a single character is missing and nothing works but no file checker in the world can detect as screwing up the works. Now in several cases a lot of re-installation has been done. But again no help. So putting a finger on the culprit file(s) has not been easy. Fortunately this machine has four active drives so reverting back to where all was OK is easy. But as for going forward, well that is at a standstill.
So, if any body out there has any insight to these three problems I would be most interested to see what you got.
Many Thanks

KMC Migration Tool stopped. How to restart avoiding the finished steps?

Hi,
I'm using KMC Migration Tool for upgrading EP 6.0 SP 2 (6.20) to EP NW04 SPS15 (6.40). We have experienced some network problems, and the process of DB migration has stopped between the end of the migration of task AP - completed suscesfully (the last step of the Migration the DataBase, many hours!!) - and the begining of the synchronization the fsdb Repositories (only a few minutes). When I tried to restart the process of DB migration, the KMC Migration tool tried restarting all the migration tasks from the begining of the DB Migration.
How to restart avoiding the finished steps? How can I avoid to repeat the migration of the DB from the begining, especially if it has executed suscesfully? Can I synchronize the FSDB repositories manually at the end of the EP migration? How can I do it?
If I had to restart the process, is it necessary to restore the target DB, or the process does not insert records from the last execution?
Many thanks for your help,
Best regards,

Hi,
CM repositories in FSDB mode can have a manual backup before configuring the local root. The XML file provides the description of behaviors and persistence levels for the file system. To have a manual backup the auto sync has to be deactivated or else there will be a huge meta data loss.
what i feel is like you have to restore the DB before manual bacup(.if the Auto sync is activated). However, i dont think so that you can resume the migration.
Regards,
Anand

I changed my password to use migration to transfer files from a G4 to a new macbook pro but now I have to sign in every time. How do I avoid the sign in?

I changed my password to use migration to transfer files from a G4 to a new macbook pro but now I have to sign in every time. How do I avoid the sign in?

I clicked on keychain access but getting a warning that it quit unexpectedly and it won't reopen.

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Can avoid the entering my username and password always when i click on URL

Hi,
Iam new to BSP,i developed a simple BSP application to display a list of orders on the second page when a cutomer is entered in the first page. it is working fine.
when i test the BSP application, it is asking for username and password.when i entered my username and password it is working fine.
Then my question is when i test the BSP application, can i avoid the entering the username and password always.
is there any way we can avoid the entering my username and password always when i click on the URL.
Thanks
Srinivas Manda

sure.
You can include the password and the username in the BSP link :
<bsp_lnk>?sap-client=<client>?sap-user=<username>?sap-password=<password>
where:
<client> = client where the username and password are defined
<bsp_lnk> = your bsp link
<username> = your username
<password> = your password
Regards,
fabrizio

I can not save as pdf. When I try to, the program shuts down. What shall I do?

I can not save as pdf. When I try to, the program shuts down. What shall I do?

Adobe Community: File Crashing on Output - printing/PDF/other

How do I reset the keypad shortcuts on a Convoy? When I flip open the phone a new text message screen opens and I can't get to the menu.

How do I reset the keypad shortcuts on a Convoy? When I flip open the phone a new text message screen opens and I can't get to the menu.

That's weird that these iphones are restored/activated through iTunes. I have a Apple so I have iTunes, yay!! I am guessing that the link that you gave me will tell how to put this iphone into Recovery mode? Now, this old iphone would of been activated on his laptop, which is with him and he is out of state. I have a new Apple, his new iphone would of been activated on our new Apple computer because he was here for Christmas and he didn't bring his laptop with him, or did he bring it with him, I don't remember now.... Now the question is, will I be able to restore his old iphone on my new computer seeing it would of activated on his laptop which is with him out of state. I am so worried that I am going to lock up this phone now. I thought I deleted the orginal guestion, and rewrote it, good grief, lol Oh wow, you are a level 10, I would be at a level -10!

I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?

I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?

Hi Atrec,
If you don't need your old custom template, save your changes with the same template name. It will tell you that this template exists and will ask you Replace? Say yes (if you do want to replace the old with the new!)
To delete unwanted templates, go to Finder > Menu > Go and press the option key. Your Library will show in the Go Menu. Navigate to Library > Application Support > iWork > Numbers > Templates > My Templates.
Delete any unwanted template by dragging it to the Trash or click on it then command-delete.
Having gone to all that trouble to find My Templates folder, right click (or control click) on it and Make Alias. Drag the Alias to any convenient place for a quick way to get back to that folder.
Regards,
Ian.

Hi i was wondering how do i get the iphone 5s comforting to know that when the battery gvshym problem or not the issue . i can see the serial number or something like that czech ?

hi i was wondering how do i get the iphone 5s comforting to know that when the battery gvshym problem or not the issue . i can see the serial number or something like that czech ?

Try this:
Go into Power Manager, choose the Logging profile.
Go into Windows' Power Options, choose a different profile, then switch back to the Logging profile.
See if this clears any contradiction between the two.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?

Someone else posted ths question a month ago, but still no answers. Anyone?
How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?
Windows XP, SP3 operating system recently re-installed so I also reinstalled my printer software. Now, for some reason, each time I turn my computer on, my HP Photosmart C4100 all-in-one photosmart premier software opens. It is not in my startup. This slows down my computer terribly, which is why I never used the program before my re-install. How can I disable this feature? I only print, I don't use it for photos.
Any help here is appreciated.

Run msconfig.exe from the start button (type in msconfig). When it comes up go to the Startup tab and find and deselect the HP product you do not want to start. Save and reboot computer. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Can only "Save to online account" when I try to "save as" won't allow me to save to local disk.

Can only "Save to online account" when I try to "save as" won't allow me to save to local disk. How do I "save as " to local disk like I always used to?

Open a PDF. Cry ah-ha!
Select one of Acrobta's Content Editing tools. The save icon becomes active. Cry ah-ha!
Selection of / use of other tools can result in the save icon becoming active.
Try each in turn (do remember to have a PDF open).
Cry with delight at each Ah-Ha moment.
Be well...

In mail how do we stop the e-mail's showing as read when you select them without opening the full e-mail

In mail how do we stop the e-mail's showing as read when you select them without opening the full e-mail? I want to click on a mail and read this in the preview pane only without showing it as read.

Not possible. In order to read an email in the preview pane requires opening the message. You can mark a message that you've read as unread after reading it.

How do I avoid the "can't save to disk" notice when updating LION?

Similar Messages

Maybe you are looking for