How do i back up files to a external drive

How do I back up files to an external drive

See the Help file:
http://help.adobe.com/en_US/elementsorganizer/using/WSae2ea3b149d0c3591ae939f103860b3d59-7 f50_WIN.html
Ken

Similar Messages

How can I backup my files to an external drive

how can I backup my files to an external drive?? Can't seem to drag files to the external drive icon

Is the drive formatted for the Mac? Is it a new drive? If so it's not formatted properly:
Drive Preparation
1.Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

How can I back up files onto an external if my hard disk can't be verified?

Hi all,
My Macbook Pro (2010) hangs up at the grey startup screen. The icon keeps spinning. I believe this may be because the laptop ran out of power during critical software updates. I have been able to reach disk utility by starting up with the original installation cd and holding 'c'. When I verify the disk, I get an error:
"The volume could not be verified completely.
Error: The disk needs to be repaired. Click Repair Disk."
When I click repair disk, I get the following message:
"Verify and Repair volume "disk0s2"
Checking Journaled HFS Plus volume
Invalid node structure
The volume could not be verified completely.
Volume repair complete.
Updating boot support partitions for the volume as required.
Error: Disk Utility can't repair this disk.. disk, and restore your backed-up files."
My hard drive isn't fully backed up and I would like to retrieve as many files as possible before reformatting the hard drive.
I have heard of being able to access the hard drive through other means (connecting the drive to another computer and/or another external) and being able to salvage files. What is the best recommendation for this?
Should I get Diskwarrior?
similar issue: http://www.megaleecher.net/Fix_Invalid_Node_Structure#axzz3L3IfWSbf

OK. You need to repartition your drive, I'm afraid, assuming the drive is OK. You have an installer DVD in the optical drive bay so do this:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Upon completion quit Disk Utility and return to the installer. Proceed to install Snow Leopard.
After installing and booting from Snow Leopard you should update it by downloading and instalingl the Mac OS X 10.6.8 Update Combo v1.1. If you wish to you can now upgrade to Lion or later from the App Store.

IMac is not booting - How can I copy my files to an external drive

Hello,
my iMac (late 2009 model, OS X 10.7.4) is not booting anymore. The iMac stopps booting at the Apple logo and the spinning gear.
I tried a couple of things that I found here in the community but nothing worked.
start in safe mode => iMac shuts off after a couple of seconds
start with safe boot (Shift-Command-V) => I'll get a couple of error messages, e.g. disk0s2: I/O error. SATA WARNING: Enable Drive PHY PM failed
reset the NVRAM/PRAM => no change
But when I try to get access on the HD with the FireWire Target Disk Mode, I can see the following folders: Applications, Library, System, Users. But the statusbar shows 0 items for each folder and it shows that the HD has 650 GB available. I have the original 1TB HD. When I try to start OS X from an external drive I can see the same folders. I tried Data Rescue 3 to scan my files, but the software stopps with an error.
My TimeMachine backup was not working, so I have no actual backup and need to find a solution to copy my files to an external drive.
Instead of Data Rescue 3, I can use TechTools Pro 6 alternatively.
Would Data Rescue 3 find files if I erase and create a new partition on the HD?
What I found out so far, it looks like a corrupted file system.
Have anyone an idea or a tip, how I can copy my files?
I would be more than happy if someone can help me.
Thank you very much for all answers in advance.

The internal drive is failing, or has failed. You may not be able to save the data.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

How to trasfer Iphoto pictures files into an external drive

My Mac book pro version of OS X 10.8.5 is running out of storage space, and is working very slow. I would like to maximize my files nto an external Drive, I have a seagate 1TB portable, and I would want to move the Iphotos and all my pics in it. I don't know if it make sense. I have only 44. GB avail out of 332. and I don't know how to maintain my main Hard drive back up and create a new external moving only the pictures there. is it even possible to have an outer disk as resource for you IPhoto? or should I take all the photos out of Iphoto? and is yes how?
I appreciate anybody that could give me a clue!
Thanks ,
Jade

Assuming you're using the default Managed Library:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

How do i move a file from one external drive to another

This is my first Mac computer and I have no idea how to move/copy a file from one external hard drive to another? It won't let me drag and drop from one Finder window to another and there is no copy/paste option on the left mouse click.

mediamagnate03 wrote:
This is my first Mac computer and I have no idea how to move/copy a file from one external hard drive to another? It won't let me drag and drop from one Finder window to another and there is no copy/paste option on the left mouse click.
That is because it is on the Right Click, and the menu.

When I backed up files on my external drive, I inadvertently dragged my itunes library there. Now I can only play songs on my laptop when my external drive is plugged in. How do I get the library back to my computer

When I was backing up files from my computer to my external drive, I inadvertently dragged my itunes library to the external drive. Now I can only play my library when my external drive is plugged into my computer. How do I get the library location changed back to my computer?

Your drive was used with a PC and formatted NTFS which is proprietary Microsoft format.
You need to install a third party program that will read the NTFS format.
There is various software from PARAGON, Tuxera and NTFS-3G
When you get the data off and have verified it to be good, reformat the drive either HFS+ for Mac use only, or for Mac and PC use then MSDOS (FAT32) for under 4GB files (best) or exFAT (for larger than 4GB files) is proprietary and Microsoft is appling for a patent, which would likely mean OS X won't be allowed to read it anymore without a licensing fee and you'l have to pay another third party software company to read the format, just like NTFS is.
The less you have to rely upon third party sources to read your drives the better, this way if you have a issue and need to read the drive on another machine you don't need the software, and a internet connection and a credit card and...and...and...

How can I transfer a back up file to an external drive?

I need to create space in my computer. But, I need to transfer a back up of my image to an external that is not my time capsule. How can I do this?

Assuming there is nothing else of importance on the 'external' drive, you can just plug it in then in Time Machine preferences panel select 'Add or remove back up disk...'
C.

How do I back up my mbp using external drive...

that has been used to backup my macbook?
I have the G Drive usb.
I don't plan to use it back and forth between my mbp and mb.
I did the final back up for my mb now I wanna use it for my mbp.
How do I do it without having to delete its content?

This one (Hitachi) has partition tab
But when I click the g drive (whick is the name of the external drive) it has no partition tab
So I guess it's the Hitachi one?
However when I change the partition layout to 2 as below
when I click apply it says that it'll delete my data
How do I solve this?
I'm sorry I have to put pics as I don't know how to explain it

How to mount and get file on my external drive

I have a external hdd drive(size 500GB) using FAT32 system. There are two partition actually. But I can only mount and read the one (disk1s2). (disk1s3)
had existing file I want to read but I can't mount. How can I do? see below
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *500.1 GB   disk1
   1:                       0xEE                         209.7 MB   disk1s1
   2:                 DOS_FAT_32 GASPARDMAC1             248.7 GB   disk1s2
   3:                       0xEE                         251.2 GB   disk1s3

Normal database access is via JDBC.
http://java.sun.com/docs/books/tutorial/jdbc/index.html
To use that JDBC driver is needed to access the database. Databases in wide usage all have one. It isn't clear from your posting that you have a common database though.

How do I copy my files from an external drive to my new computer

I had all my music files on my old laptop whose motherboard burned out. I removed the hard drive, and would like to copy my old music files from my old hard drive to the internal hard drive in my new computer. I think I can do this one file at a time but there are like 4000 files so that is impossible

File -> Add folder to library.
Select the topmost folder with the music

Lightroom - how to restore backed up files (not Lightroom catalogue) from one external drive to another?

How to restore backed up files (not lightroom catalogue) from one external drive to another.
I recently backuped my photo files from one external drive to another. The backup (carbon copy cloner) pointed to some corrupt files on the original drive.
I have deleted those files and am finding good copies of them in Time Machine backups.
I want to get rid of the original external drive; use the recent backup as my main external and then back it up onto a brand new drive.
What I am not sure about is how to point lightroom to the backups so it knows to look on the new drive instead of the old drive and all those exclamation marks and question marks go away.
There are close to 60,000 images in numerous folders all with one 'parent folder.'
My best guess is from Lightroom Help - Create and Manage Folders - Locate Missing Folders
Can I point to the one parent folder and all the subfolders will come back?
Is this the process to recover files into lightroom and will there be a problem with so many photos?

http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

Your drive was used with a PC and formatted NTFS which is proprietary Microsoft format.
You need to install a third party program that will read the NTFS format.
There is various software from PARAGON, Tuxera and NTFS-3G
When you get the data off and have verified it to be good, reformat the drive either HFS+ for Mac use only, or for Mac and PC use then MSDOS (FAT32) for under 4GB files (best) or exFAT (for larger than 4GB files) is proprietary and Microsoft is appling for a patent, which would likely mean OS X won't be allowed to read it anymore without a licensing fee and you'l have to pay another third party software company to read the format, just like NTFS is.
The less you have to rely upon third party sources to read your drives the better, this way if you have a issue and need to read the drive on another machine you don't need the software, and a internet connection and a credit card and...and...and...

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I also had problem accessing my WD MyBookLive after upgrading to Maverick.
To resolve the problem, I used Connect To Server (Cmd K) to specify the IP address.
Then I enter a user id and password I created in the MyBookLive.
You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
Just enter the MyBookLive IP address as the URL.

I have been dragging my files to a external drive to have a back-up for them and I lost some of my folders. They just went completely missing. I didn't delete them, and it was all stuff that I have worked on in the past month. How do I get them back?

I have been dragging my files to a external drive to have a back-up for them and I lost some of my folders. They just went completely missing. I didn't delete them, and it was all stuff that I have worked on in the past month. How do I get them back?

You really should be doing backups with an actual backup application, especially one that will work automatically, and, if your external HD is large enough, back up your entire system. These can automatically back up only what's changed since the previous backup, and some will keep "archive" copies of things you've changed or deleted, also.
Too many things can go wrong, such as your internal HD failing, and you'll have a major project to reinstall everything.
You already have Time Machine, built-in to OSX. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
#27 in the second link mentions some alternatives, too.

How do i back up files to a external drive

Similar Messages

Maybe you are looking for