How do i back up what i can to a external hardrive after im in the disk utility?

my mac wont boot, its a 08 i believe, 2.88 ghz dual core, 500 gb hard drive, has always been fast and reliable. i have been running osx lion since it basically came out, with no troubles. now it wont boot, im getting  the apple logo with the loading bar, not loading at all. fine. im in disk utilities and now i have a external hardrive. i have about 3000 songs, and microsoft office 11. just the programs. a few docs would be nice to keep, but the music and movie files are all i really want. music especially. how do i load them onto the hardrive?

matt8696 wrote:
im in disk utilities and now i have a external hardrive.
Format the blank external drive in Disk Utility
erase>Security Option> Zero all data and wait
partition tab, click big box, 1 partition, option GUID, format OS X Extended Journaled, MacIntosh HD and click Apply.
Quit DU and install Lion on the external drive, you will need your AppleID and password.
Once finished, reboot and hold the option key down, boot off the external drive, go through setup and use the same user name as before.
Access the internal and retrieve your files to the external, disconnect/reboot.
At this point you can hold command r and reboot and use Lion Recovery to Erase (Zero) the internal Lion OS X partition and reinstall Lion again onto the Lion OS X Partition from Apple's servers. Install all your programs from fresh sources and files from the external drive.
https://discussions.apple.com/message/16276201#16276201

Similar Messages

  • My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you

    My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?

    Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
    Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
    Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
    Quit and you should be able to install OS X now with your Apple ID and password.
    see
    http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/

  • Music Server Can't See External Drive Formatted for WIN with Disk Utility.

    Is there any reason an external drive formatted for WIN (MS-DOS(FAT)/FAT32 or NTFS w/ NTFS-3G/MacFUSE) with Disk Utility would not work for intended purpose? I have a music server (Bryston BDP-1) that uses an attached USB drive for storage/playback of music and can only read FAT32 or NTFS formatted drives. I've tried both and neither is readable by the BDP-1, yet I have no problem reading/writing to the supplied 2GB Thumb Drive (FAT32), as well as another 2GB Thumb Drive (FAT32). Get Info shows; "FAT32" for all drives formatted as such.
    Note: From what I'm told the BDP-1 uses a scaled down version of Linux for it's OS. Isn't that UNIX? Shouldn't it be compatible (Read/Write) with other platforms (i.e, Mac)? Bryston says the reason they use it because it's Open-Source. Does Linux only work FAT32 or NTFS?
    I do have Fusion/XP, also access to WIN PC's, but I just hate to use it when I shouldn't have to. It makes no sense why the drive can't be read by the BDP-1 when formatted for WIN under OS X.
    And there was one other issue, after the third try to format fro WIN the external drive suddenly began making faint clicking sounds instead of a spinning drive sound only when plugged into BDP-1 USB port. But it works fine when connected to iMac FW.
    HW Specs:
    Drive: G-Drive Mobile USB/FW 750GB

    Exchanged drive. Works now.

  • When I reboot my mac it automatically launches disk utilities. i have run the utility. all clear. but each time i reboot i get the disk utility. how do i override so i can have my hard drive back?

    When I reboot my mac it automatically launches disk utilities. i have run the utility. all clear. but each time i reboot i get the disk utility. how do i override so i can have my hard drive back?

    What OSX version is it?
    Does holding alt key at bootup show any boot choices?
    Does holding Shift key at bootup to boot in Safe mode do the same thing?

  • HT202879 I am switching to Apple macbook pro from Windows laptop.  Is Apple compatible with Microsoft Office?  How can I transport from Windows to Mac?  What I have saved on external hardrives, will I be able to open it on Mac?

    I am switching to Apple macbook pro from Windows laptop.  Is Apple compatible with Microsoft Office?  How can I transport from Windows to Mac?  What I have saved on external hardrives, will I be able to open it on Mac?

    Office for Mac, http://www.microsoft.com/mac/products, can open/edit/create Office documents.If your external drive is formatted NTFS then you can copy the Office documents to your computer and work on them. You won't be able to save the files back to your NTFS formatted drive. But you will be able to save the documents to your internal drive. You can move all the external files to your internal drive then format the external drive for Apple. Then you can copy the files back to your external drive for ongoing use.

  • Will doing the software update to 6.1.2 destroy any info saved on my iPhone 4? If so how do I back up what is on there - especially the contact list?

    Will doing the software update to 6.1.2 destroy any info saved on my iPhone 4? If so how do I back up what is on there - especially the contact list?

    see the link above
    and this discussed in above
    http://support.apple.com/kb/ht1766

  • I am switching to Apple macbook pro from Windows laptop.  Is Apple compatible with Microsoft Office?  How can I transport from Windows to Mac?  What I have saved on external hardrives, will I be able to open it on Mac?

    I am switching to Apple macbook pro from Windows laptop.  Is Apple compatible with Microsoft Office?  How can I transport from Windows to Mac?  What I have saved on external hardrives, will I be able to open it on Mac?

    Is Apple compatible with Microsoft Office?
    Any computer is compatible as long as it can read and write Office files. But for perfect (or at least near perfect) compatibility, you would want to purchase Office 2011 for Mac.
    How can I transport from Windows to Mac?
    You can't directly transport any installation of Windows. All PC's come with a machine specific version of Windows intended for that PC. They don't have all of the hardware drivers the retail disks cover.
    If you want Windows on your Mac, you would first purchase a full version copy (NOT an upgrade disk) of Windows 7 or 8. Those are the only supported versions on newer Macs. You install it through the supplied Boot Camp utility that comes with the Mac to create a new partition for Windows, and then install the retail copy of Windows you purchased.
    The reason only these versions of Windows are supported is the same basic reason as a machine specific version of Windows for a PC. Apple only includes the necessary Mac hardware drivers for Win 7 or 8 on new Macs.
    Once Windows is installed, you could then install the version of Office for Windows you already own. The nuisance of a Boot Camp partition is that you have to physically boot to either Windows or OS X, so you can only use the apps of the OS you're in at the time. To use both at once, you'd have to use virtual machine software (Parallels, VMware, VirtualBox) and then install Windows within that. Then you'd be able to run Windows inside of OS X and have access to both at the same time.

  • My phone shut off as I was charging it and now it has a black screen. Does anyone know how to fix this or what I can do?

    My phone shut off as I was charging it and now it has a black screen. Does anyone know how to fix this or what I can do?

    Basics from the manual are restart, reset, restore.
    Have you tried these?

  • TS2986 I keep getting the message that my HD is full, when I run the disk utility it appears that over 400 GB are in the "Other" section, how can I access that area to clean up?

    Please help me to figure out how to clean up my HD. When I run the disk utility I get the following view:
    As you can se 467.79 GB are in the "Other" section, but I cannot find a way to get to that and clean it up, please anyone out there How can I clean that up?

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data. Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space. Proceed further only if the problem hasn't been solved. ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root. Back up all data now if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup. Launch the Terminal application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens. After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

  • HT201250 How do I back up a MAC G4 on an external hard drive?

    How do I back up a MAC G4 on an external hard drive?
    It's actually OS 10.4.11
    Am not exactly sure of what to do and just received the hard drive.
    Can I download something from the Internet?

    Look at Mac Backup - Mac Backup Software, Hardware, and Guides for Your Mac http://macs.about.com/od/usingyourmac/tp/backuphub.htm and  Mac OS X data backup FAQ http://www.macmaps.com/backup.html  and Important Mac Backup Tips- Time Machine, CCC, SuperDuper http://mikosweb.com/it-advice-blog/70-mac-backup-tips Here's a list/description of Mac backup software http://www.pure-mac.com/backup.html
    The majority of Mac users use CarbonCopy Cloner @ http://www.bombich.com/software/ccc.html , or SuperDuper @ http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html . You can also use or the Restore function of Disk Utility included in OS X.
    When you backup, boot into Safe Mode (depress the Shift key at startup) and the backup will be safer and faster.
     Cheers, Tom

  • HT4623 While in Japan on a trip, I updated my iPhone to iOS6.  Now, when I try to update my apps, I'm told that my account is not good in the Japan store I must switch to the USA store.  How do I do that so I can download and update apps at home in the US

    While in Japan on a trip, I updated my iPhone to iOS6.  Now, when I try to update my apps, I'm told that my account is not good in the Japan store I must switch to the USA store.  How do I do that so I can download and update apps at home in the USA?

    Your Apple ID is tied to the US store. Log out of the store, then trying logging back in.

  • I am trying to upgrade my hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive.  I can only get so far, just before cloning may start and receive an "error 254" and can go no further.  Any idea what this error is?

    I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive.  I can only get so far throughj the process where its about to start cloing when I get a message " error 254".  Any idea what that means and how do I get around this issue so I can use my new hard drive?  Thanks for your input.
    Vince

    Connect the HDD to your MBP.  Open Disk Utility>Erase and drag the HDD icon inrt the Name field.  The format should be Mac OS Extended (Journaled).  Click on the Erase button.
    Then try the clone process again.  You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
    Ciao.

  • How do i back up my macbook pro to an external hard drive?

    how do i back up my macbook pro to an external hard drive?

    schmunzelmonster, greetings;  Your suggestion is a good one.  CCC does create a boot drive which as you point out can be most useful at times. Time Machine does not have that capability but it retains a history of activities and transactions that CCC does not.  CCC only retains information as of the last update.
    Neither individually is the 'perfect' backup solution individually, but if both are utilized it becomes that.  There is no harm in backup redundancy.
    My only complaint about CCC is that is is very slow in performing updates compared with Time Machine.  Just a nit on my part.
    Ciao.

  • How  can i do to reappear the hd icon on the disk utility

    In this day my computer erase all the program,files, and the operating sistem. i need to format my computer but when i go to install the operatting system again the hd icon dont appear. What can i do?

    im running whith the cd install 1 and then go to the menu bar and in disk utility.
    Then in the disk utility it doesn't appear anything no appear the H D and no appear the driver of cd or dvd . How can it be possible that all the computer is in blank. I make the test of the hardware (by pressing the D of the keypad when is starting) and the result was the hardware don't have any problem.

  • How can i add an Engraving after i order the ipad ( add, not edit)

    how can i add an Engraving after i order the ipad ( add, not edit)

    Sorry, I don't mean to appear rude, but I don't understand the question. What do you mean "how do you call"? You pick up the telphone and call the store's number, just as you would any other person or company.
    None of the Apple Stores have on-line chat.
    Regards.

Maybe you are looking for

  • Error while deploying a mapping in OWB.

    Hi All, OWB configuration is as follows: Oracle9i Warehouse Builder Client: 9.2.0.2.8 Oracle9i Warehouse Builder Client: 9.2.0.2.0 OS: Windows XP Professional. Following is error message displayed when i tried to deploy a mapping thru OWB Client. RTC

  • DIR7 Character Set Problem / Foreign Language

    Hi there, I am working on an app built using Director 7 that until now has used the standard English (latin-1) character set. However, I am required to deliver a new version including some elements displayed in a second language, in this case Welsh,

  • Java Digital Signature - certificate validation question

    I am not sure if this is possible but here is my problem/question: I need to publish a web based program in Citrix. My question is, everytime a user logs into Citrix and executes this application they are prompted to trust the Java certificate. Usual

  • Router as range extender????

    I was told that I could use this router (EA4500) as a range extender for my Uverse service. To do this, do I need to set it up in bridge mode? I'm a novice at this & I'm not sure what I'm doing. Does the router have to remain plugged in to the modem

  • Unable to connect to your database server using the provided settings?

    can anyone help me, I keep getting this error message in Safari... how do I fix this?