How do I backup only new music added to iTunes library?

Hi all,
I have my iTunes library of 9000+ songs on my laptop, and backed-up on two external hard drives (a Passport and a Lacie). Is there a way to "update" my backups with just the new songs I've added or do I have to delete the old backup libraries and replace with the new library? Same questions for iPhoto as well. I've loaded lots of different music on and it would be quite the chore to physically look through each folder to see what albums/songs are not in the older iTunes libraries to update them. Thank you for your help as always!

I also need this answer for OSX.
For Windows, here's this.
http://wareseeker.com/Utilities/aniosoft-itunes-backup-1.1.0.zip/7c1069d63
I've never used it personally, but the description says it can update the backup.

Similar Messages

  • I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

    I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

    What happens when you try to sync?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    Do the songs play in iTunes?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod        
    Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

  • How can I update all my music from my itunes library to my ipod touch ?

    How can i update all my music from my itunes library to my ipod touch ?

    Sync them
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

  • How did I add my new music (not from itunes) on my phone?

    I downloaded some music from another location. It is showing up in my itunes, but when I plug my iphone 5 into the computer, my new music isn't showing up. How do i sync this new music to my phone? This phone has been giving me so many problems and is driving me crazy!!

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • How can I backup only what I want in iTunes?

    I have backed up my iTunes library to DVDs but could not figure out how to avoid backing up podcasts (which I delete after listening to anyway) and how to back up my Audible purchases? Any suggestions? Thanks in advance.

    STU9000 wrote:
    Wish I'd known that before I bought an ext HD.
    Why? An external hard drive is actually a MUCH easier way to back up your iTunes library.
    Assuming you use the iTunes default settings where iTunes copied added items to your iTunes folder and organizes your library (meaning - everything is all self contained in the iTunes folder), then all you have to do is drag & drop your iTunes folder (not just the iTunes Music folder you find inside the iTunes folder) to the external drive and copy the entire thing.
    If you want to test that it worked or would like to actually start using it from that location instead, use these instructions when you start iTunes to point it to the new location...
    How to open an alternate iTunes Library file or create a new one
    http://docs.info.apple.com/article.html?artnum=304447
    If you are just testing, then close iTunes after you verify it works, and restart iTunes again with the same instructions and point it back to your internal drive (original) location.
    Back up your iTunes library by copying to an external hard drive
    http://docs.info.apple.com/article.html?artnum=307074
    Patrick

  • Since OS Mavericks upgrade any new music added to itunes wont sync on my iPhone

    I only sync to a selected playlist, as my itunes library is far greater then the capacity on my iphone, I usually burn lossless but downsize files for syncing. I have tried other file formats and they still dont appear on iphone. According to itunes there is at least 5gb free space on my phone. Can anybody help?

    Hello, I was able to get the greyed out circles to stop by updating to the newest software for the phone and itunes. I'm sure you have already tried that though. However, I now have a new problem. Itunes shows certain albums on the phone in the window but they don't appear on the phone at all. They even play on iTunes from the phone. Were you able to find a solution to your problem? I'd really appreciate some help as this is getting old...

  • How can I transfer my iphone music to my itunes library?

    I got a new laptop and I still have my music on my iphone but since my itunes library is empty I want my music to sync. But I can't figure it out. HELP ME
    ps - I have a mac laptop and iphones 4s

    I posted this before and it got removed.... probably for "advertising" or some crap.... I'm not trying to sell anything, I'm just trying to help. So I'm posting it again in hopes that it makes someone's day
    The first thing you need to do (FOR MAC ONLY) is to go here and download this free program (trust me, I'm usually hesitant on downloading stuff, but this program is a life saver!). The download took a total of maybe 10 seconds... user friendly and extremely simple program, as you'll soon find out.
    http://www.headlightsoft.com/detune/downloads.html
    Once you've successfully installed DeTune, run the program! Once you connect your device, it will automatically show what device is connected. You're ready...
    Step One: Connect your iPhone to your laptop (USB) - ignore iTunes if it opens, but CANCEL any sync that may occur (if it doesn't; even better!)
    Step Two: In DeTune, it should automatically recognize your device (iPhone) and show all of the data in an iTunes-style display. On the left-hand side, you'll see tabs for Music, Podcasts, etc. (JUST LIKE iTUNES) Step Three: THIS STEP IS NOT NECESSARY, but I highly recommend it to keep all of your stuff organized: Create a new folder on your desktop (title it whatever, I used "iPhone Transfers")
    Step Four: In DeTune, select everything you want to transfer. DRAG AND DROP it into the folder you made on your desktop... wait for the copying to complete.
    Step Five: Stare at the screen in complete awe and amazement as all of your music is now comfortably sitting on your desktop waiting to be imported into your iTunes music library!
    My files were in m4a format, so you may not be able to simply drag and drop. Import them into iTunes via FILE ---> ADD TO LIBRARY, then select the files.... Don't know why you can't just drag and drop, but that works just the same.
    I hope this helped! I know I was in the same boat for quite a while, and am VERY pleased with this program. I bet my post disappears within a week
    Good luck and Happy New Year!!!

  • HT1386 How do I transfer all the music from an iTunes library on a PC to on another iTunes library on a Mac, with being able to keep both libraries of music?

    A year and a half ago I purchased an iPhone 4s and created a substantial library of music in the iTunes account on my PC. Just recently, I purchased a Macbook Pro w/ Retina  and am just getting around to syncing the newer iTunes library on my iPhone. However, when I did, iTunes deleted all the songs that I had previously on my first iTunes library.
    I still have access to all the other songs on the previous iTunes library, but how can I add both libraries to my iPhone without losing any music?
    I've been searching for about three hours on ways to do this and I've come up with nothing.

    Hi davidforner!
    I have an article here that I believe can help you accomplish your goals. That article can be found here:
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/ht4527
    You can also use this article to learn more about switching from a PC to a Mac and getting your information onto the new computer:
    Apple - Support - Mac Basics
    http://www.apple.com/support/macbasics/
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • How do I point my new Macbook at my iTunes Library on my NAS

    Hi
    I've recently bought a Macbook Air and switched from a Windows 7 laptop.  I have my iTunes library (and my wife's library) located on my NAS.
    I now need to configure my Mac user accounts to use the libraries on the NAS (QNAP).  I no longer have access to the Windows laptop (it's broken).
    Please could you advise.
    Thanks
    Mike

    Completely quit iTunes if you have it open.   Then Holding down the Option key while you re-open iTunes should prompt you to select the iTunes Library you wish to use.
    Just Navigate to the folder on your NAS where your iTunes library resides.
    iTunes: How to open an alternate iTunes Library file or create a new one - Apple Support

  • How do I add a new ipod to my iTunes library without loosing the original ipod connection, how do I add a new ipod to my iTunes library without loosing the original ipod connection

    I have a new iPod touch, that I want to sync with my existing iTunes Library. However, I want to keep my old classic ipod (for use in the house); can I have two registered to one library without loosing or wiping my library?

    mtneer wrote:
    It has everything to do with it.
    The OP wants both iPods to carry the contents of the library but was afraid that syncing the second iPod would somehow mess up either the library or the first iPod - not, of course, the case since no information from the iPod is transferred to the library.
    Your suggestion is applicable for people who want a second iPod to carry a different selection of songs.

  • When i plug in my ipod a message says I can only have one ipod per computer, but my last computer broke. How can I make my new computer my actual Itunes library?

    when i plug in my itouch, a message pops up and says my ipod is already registered on another computer (my old computer that broke). How can I make it so that the message won't pop up again and i can freely sync songs from my computer to my itouch and vice versa?

    Copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • TS4062 how do I fuse my phones music onto my Itunes library?

    I'm using a new computer but the same apple ID. for some odd reason it will not sync my old music onto y new computer. HELP!

    The iphone is not a backup/storage device.  The sync is one way - computer to iphone.  The only exception is itunes purchases; File>Devices>Transfer Purchases
    Copy everything from the old computer, or your backup copy of your old computer to the new one.

  • I just got a lot of new music in my iTunes library and I tried to sync the music to my iphone and after it syncs about 10-13 songs it says canceling sync and that happens every time I have tried everything I need help

    Please help me I'm lost it says canceling sync after only some songs download I don't know what the problem is I tried to fix it but nothing works I don't know what to do

    Hello there, Savagejacob.
    The following Knowledge Base article offers up some great steps for unexpected disconnects of your iOS device when syncing:
    iOS: Troubleshooting USB-related alerts when syncing
    http://support.apple.com/kb/TS5254
    Check connections
    Try the following steps to check the connection between your device or computer. You might need to do only one of these steps to resolve the issue, so test your connection after each step.
    See if the cable connection at the device or computer has come loose or unplugged.
    Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
    Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
    If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
    Close any virtualization apps (such as Parallels or VMWare).
    These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
    Restart your computer.
    Restart your iPad, iPhone, or iPod touch.
    If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
    Update to the latest version of iTunes if you have not already.
    Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
    If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How to transfer purchased and other music onto the itunes library

    I was just wondering how do i  transfer new purchased music nd other music onto itunes library

    iTunes purchases by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    Other music by using a third-party program like one of those discussed here:
    Copy music from Ipod to new computer...: Apple Support Communities

  • How can my daughter download her music from my itunes library without it syncing to my ipod

    My daughter doesn't have her own laptop and wants to use mine to download music from itunes to her ipod.  I currently have itunes downloaded which contains my playlists etc but is it possible to download her music to the same itunes without her music automatically syncing to my ipod (and without my music syncing to her ipod)?  I've created a new library which I thought might do it but it still contains my albums (though not my playlists).  Is this the right way to do it or is there another way?

    Plug the device into the computer.
    Select the content desired to sync.
    Sync.
    iTunes remembers what to sync to the device based on the device ID.

Maybe you are looking for

  • How to disable UAC for standard account in windows 8.1 single language OS

    Hi, How to Disable UAC in a standard account on windows 8.1 single language OS. application for mobile modem (TATA DOCOMO) always asks for administrator password, in windows 7 I used to just set UAC never Prompt in admin account and same setting woul

  • Replacement fm for HELPSCREEN_CREATE needed

    Hi All, we are working on a upgrade project (4.6c to ECC 6.0) we found  function module HELPSCREEN_CREATE has been obsolete. can anyone suggest a replacement for the same. attaching the code beow CALL FUNCTION 'HELPSCREEN_CREATE'        EXPORTING    

  • Blackberry Desktop Software and 9800 Torch

    I attached my cellphone to my PC and I see it charging. I open Blackberrry Desktop Software but it acts like I need to connect my cellphone even though it is already connected. What do I have to do to get the software to recognize my 9800 Torch ?

  • Javax.transaction.TransactionRolledbackException: CORBA TRANSACTION_ROLLEDB

    Hi!!! I have a problem while I'm trying to create CMP Entity Beans. I got these CMP Entity Beans using Netbeans IDE 5.0, getting the beans from an SQL Server 2000 database. I got this error: HTTP Status 500 - type Exception report message description

  • EXP propagation

    Hi, Can anyone shed some light on the issue of EXP field propagation as labels are removed or added? Specifically.... 1. I understand that at ingress of MPLS cloud you would use class-based policy to apply the initial EXP value based on some class-ma