How do I batch adjust the time on select images?

I took photos with the iPhone and a handheld point and shoot in another time zone. The iPhone automatically adjusted time to the time zone I was in. I forgot to manually adjust the point-and-shoot and so there is now a two hour time difference.
Is there a way to batch correct the time on select images in iPhoto '09?

Sure. Use the Photos -> Adjust Date and Time command
Regards
TD

Similar Messages

  • When adding a time to an event in the calender in the new ios7 the page scrolls up when trying to adjust the time .How do I finely adjust the time without the page moving upwards?

    When entering an event in the calender the page scrolls up when trying to enter and adjust the time,how do you adjust thge time upwards without moving the page?

    I see no direct connection.. a printer and the computer setup for internet are not related.
    But it sounds like the router in the wife's office is now in the wrong mode..
    If you have an existing main router replace the second router for a switch .. that is the easy way.
    Otherwise you need to bridge the router if it has that option.. most do not. Or use wan bypass.. where you turn off the dhcp server in the router and fix its ip to match the range of the main router.. this is the hassle of using router as a switch.
    BUT I am making a huge number of assumptions.
    What I need is the full network layout.. a quick picture would help.
    I need main modem.. main router.. (maybe same box or different).. make model and current IP address and how dhcp is setup.
    I need secondary router.. if that is what it is, IP and settings.
    I want the printer type and model. How it is connected.
    BTW I much prefer to see a network printer plugged into the network rather than usb.. it is only a matter of sorting the IP settings and driver pointing to the network rather than local.
    Or you should think of it as a broken washing machine and call the technician.. who could fix the whole lot in an hour.

  • How do I batch restore the time on my NY images to 6 hours earlier in Aperture?

    Hi,
    I think my camera is stuck on European time. Batch changes only seem to deal with time zones and I don't know how to use that to achieve what I need.
    Thanks,
    Raphael

    Aperture ha stwo time adjustments:
    One adjustment is for correcting the Time Zone: If your camera was set to a different timezone then the actual time, you use "Metadata > Batch Change"
    You set "Camera's Time Zone" to the Time Zone your Camera has been set to, when you took the pictures.
    You set "Actual Time Zone" to the Time Zone you want the images to show.
    For example: If your camera is stuck on European time, but you took the pictures in London, set the "Camera's Time Zome" to "MET" (Paris) and the Actual Time to GMT (London).
    The second adjustment is for correcting inaccuracies. If your camera's time is inaccurate - e.g. off by several minutes, you can correct that by "Metadata > Adjust Date and Time". The panel will show the current time for one of the images and you can adjust this to the correct time. All other selected images will be adjusted by the same amount.
    Regards
    Léonie

  • HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

    I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

    Thanks Roger W1,
    Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
    This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
    After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
    This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
    The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
    Thanks,
    Jay

  • Since installing Snow Leopard on my iMac, my incoming mail on Entourage is showing sending time nine hours too early on incoming messages. How do I adjust the time in Entourage? Thanks

    Since installing Snow Leopard on my iMac, Entourage is showing sending time nine hours too early on incoming messages. How do I adjust the time in Entourage? Thanks

    Sylvia,
    There is a Office for Mac Product Forums, if now one here is able to answer I'd recommend posting on that forum.

  • How do I adjust the levels of multiple images at once?

    CS6 user, I recently scanned a few pages of an old black and white comic, which thanks to the passage of time are now more black and beige.
    I know how to adjust levels using the eyedropper tool but is there a way to apply the same effect to several images in one go (i.e. adjust the levels of one image then apply the same effect to the others as a batch of files), rather than pressing ctrl+alt+l and saving each image individually?
    Thanks

    You can also select all of the images in bridge, go to Tools, Photoshop, Load files into layers. Then select all layers, put them into a group (Cmd G), add layer mask to the group and do the levels there.

  • Can I adjust the time for each slide?

    I'm making videos out my own photos.
    I've figured out how to upload the photos, record a commentary, etc. but I need to adjust the time that each slide is shown. This is because the videos are how-to's, and some explanations are longer than others, and in that case the slide needs to stay on longer.
    I'm using iMovie 08 and can't upgrade because I'm still on OSX 10.5.8.
    Thanks!
    Gina

    There should be a Duration button at the bottom left of the photo thumbnail in your project. Click this button and you will see a dialog box where you can adjust the duration. Be sure not to check the box that say "apply to all photos".

  • How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

    how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

    Are you using a v6 uitlity.. because it is a toy.. ??
    Get v5 utility and then you can hold down the option key and select the right mode.
    If you have lion, just install it.. For ML follow this.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • How to get rid of the "time out" when using DAQ AI in the example program

    I try an example file called "AcqVoltageSamples_IntClkDigRef" (Visual C++ .NET). It works great. However, if the program has not recieved the data, it sent out a timeout message. How to get rid of the "time out"? I cannot find anywhere in the code. Is this a property I have to reset somewhere else?
    Thank you,
    Yajai.

    Hello Yajai,
    The example program will use the default value for timeout, 10 seconds. To change this, you will have to set the Stream.Timeout value. I inserted this function into the example and set it equal to -1, and the program will wait indefinitely for the trigger signal without timing out. Please see the attached image to how this was implemented.
    I hope this help. Let me know if you have any further questions.
    Regards,
    Sean C.
    Attachments:
    SetTimeout.bmp ‏2305 KB

  • How do I set up the Time Capsule without an internet connection

    How do I set up the Time Capsule as a wireless hard drive without an internet connection.   I am in a office situation in which I cannot access my work network.  I need to be able to share files on the Time Capsule over the wire connection.

    Are you using a v6 uitlity.. because it is a toy.. ??
    Get v5 utility and then you can hold down the option key and select the right mode.
    If you have lion, just install it.. For ML follow this.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • How can I fix the long delay (15 min  ) between the time I select a song to the time it begins playing?

    How can I fix the lond delay (15 min.) between the time I select a song to the time it begins playing?

    Hi Ben,
    This is a common issue that NI LabVIEW does not address.
    The good news is that OpenG provides a function to do just what you need.
    See this article: Resize Front Panel to largest decoration
    The way to get the OpenG functions is to use the JKI VI Package Manager (VIPM).
    In addition to the OpenG functions there are several other community provided tools avaliable through VIPM.
    For a quick test, I'm attaching these files (LV version 2010 sp1):
    Fit VI window to Largest Dec__ogtk.vi and the required sub vi Current VIs Parents Ref__ogtk.vi.
    You should really use VIPM to get the full OpenG library - there are many gems in there.
    steve
    Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
    question. Give "Kudos" to replies that help.
    Attachments:
    Fit VI window to Largest Dec__ogtk.vi ‏29 KB
    Current VIs Parents Ref__ogtk.vi ‏9 KB

  • HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • How can i ensure that the time capsule back up all my data?

    how can i ensure that the time capsule back up all my data and no any data missed during the back up? becz i was backing up my mac to time capsule for the first time and it takes only 5 hourse for 279GB which is doesnt make sense
    any idea, how to ensure that all my data been backed up

    well this tells you why you are having issues.. since you have a filevault and unless you are logged on as that user TM has no way to backup the vault.
    so that is why the backup is so small.
    And you cannot remove the file vault because the disk is too small.. you are in catch 22..
    You cannot backup and you cannot remove the vault..
    Login as the user who has the file vault and copy the files off the computer to a directory on the TC.. Then just delete the files on the computer.. that will then allow you to remove the file vault.
    But never  will I ever use file vaults so I am being theoretical .. please read it up yourself.
    http://pondini.org/TM/25.html
    You are not doing the background reading you need to understand what you are doing..
    read the whole of pondini's info.. or at least skim it so you know what is there.
    Avoid like the plague file vaults..
    When disks go belly up, as they always do.. your files will be lost. Somewhere they need to be stored in the clear.. so why bother .. put better security on the computer and forget vaults.

  • How can I find out the dpi of an image in Acrobat.

    How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

    Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
    That opens a panel on the right.
    To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
    Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

  • What has happened to the iPad 2 finger select and drag technique? Since upgrading to iOS7 it does not work? I used this all the time to select multple images, approx 75  from an SD card containing 1000  images. Its painful indvidually selecting the images

    What has happened to the iPad 2 finger select and drag technique?
    Since upgrading to iOS7 it does not work?
    I used this all the time to select multple images, approx 75  from an SD card containing 1000  images. Its painful indvidually selecting the images

    What would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
    Please submit your feature request to Apple at this link: http://www.apple.com/feedback

Maybe you are looking for