How do I batch restore the time on my NY images to 6 hours earlier in Aperture?

Hi,
I think my camera is stuck on European time. Batch changes only seem to deal with time zones and I don't know how to use that to achieve what I need.
Thanks,
Raphael

Aperture ha stwo time adjustments:
One adjustment is for correcting the Time Zone: If your camera was set to a different timezone then the actual time, you use "Metadata > Batch Change"
You set "Camera's Time Zone" to the Time Zone your Camera has been set to, when you took the pictures.
You set "Actual Time Zone" to the Time Zone you want the images to show.
For example: If your camera is stuck on European time, but you took the pictures in London, set the "Camera's Time Zome" to "MET" (Paris) and the Actual Time to GMT (London).
The second adjustment is for correcting inaccuracies. If your camera's time is inaccurate - e.g. off by several minutes, you can correct that by "Metadata > Adjust Date and Time". The panel will show the current time for one of the images and you can adjust this to the correct time. All other selected images will be adjusted by the same amount.
Regards
Léonie

Similar Messages

How do I batch adjust the time on select images?

I took photos with the iPhone and a handheld point and shoot in another time zone. The iPhone automatically adjusted time to the time zone I was in. I forgot to manually adjust the point-and-shoot and so there is now a two hour time difference.
Is there a way to batch correct the time on select images in iPhoto '09?

Sure. Use the Photos -> Adjust Date and Time command
Regards
TD

My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pr

My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pro.

Hello Sandra,
The article linked below details how to go about restoring items from Time Machine in Snow Leopard.
Mac OS X 10.6: Recovering items using Time Machine and Spotlight
http://support.apple.com/kb/PH6379
Sincerely,
Allen

My Macbook Pro will not boot up. How can I get to the time machine back up?

When I turn on my Macbook Pro, it gets to the gray screen with the Apple logo and the spinning beach ball and stays there. I use Time Machine with a Seagate external harddrive to back up my files. I at first thought recovery meant using Seagates's Replica software, so I followed the instructions, inserting the recovery CD and booting up to the C drive. The Seagate tecnical support person informed me that I was in error and that because I was using Time Machine, the Replica recovery CD would not be useful to me. Now I have two problems. I can't boot up, and I can't get the Replica CD out of the C drive. So I have several questions. How do I remove the CD? There doesn't appear to be a place to use the old paper clip method. Once I've removed the CD, how do I reinstall the OS? I don't seem to have a hard copy of Mavericks that should have come with this laptop.

historyrocks wrote:
How do I remove the CD?
Restart, hold the mouse button down as it boots, it should be ejected.
historyrocks wrote:
Once I've removed the CD, how do I reinstall the OS? I don't seem to have a hard copy of Mavericks that should have come with this laptop.
Lets take this step by step…
Once the disk is ejected see if 10.9 can boot normally.
If that fails let us know what happened.
Power off & disconnect your Time Machine disk and any other external disks just for now (so we know it is safe & not causing this issue).
Reboot & hold alt - it will take you into the 'boot picker' it will list all available boot disks. Make a note of how many disks appear and what the names are - let us know here.
You could try picking the 'recovery partition' if available. That should eventually show you a screen where you can select Disk Utility in the list of options…
In Disk Utility select the 'boot disk' – this is usually the item above 'Macintosh HD' (or whatever your boot disk is called).
Select the 'First Aid' tab
Repair any disk damage that is reported via 'verify'. Then select the 'Macintosh HD' & repair the permissions too.
Recovery mode explained…
http://support.apple.com/kb/HT4718
If you have no recovery partition you can use 'Internet recovery mode' (Command+Option+R at startup) - this downloads enough to repair & install 10.9. Try to use an ethernet connection for the internet - it can be many times faster & more stable than wifi.
Once that completes reboot, hold alt & select your main boot disk (maybe Macintosh HD) if it is available.
The recovery partition can also be used to download & install 10.9.3. However you should probably see what state the Mac's boot disk is in. It's possible that erasing & reinstalling is the only option. If you go down this route you can restore the Time Machine backup, but it's better to see if it can be fixed first.

Firefox how to normalize or restore the original settings

firefox how to normalize or restore the original settings edit
Details

Best way would be to just grab the pen tool and recreate the illustration using your photo as a guide, or if you trust your precision just use the brush tool and draw on top using sampled colos. Restoration using pixel-based methods will be time consuming, there's too much texture and too many cracks.

How do I substract an image at the time t with an image at t-1 to detect move in a grab acquisition

After the VI acquire in a grab acquisition, how do I substract an image at the time t with an image at t-1 to detect the movement in the scene?

Hello,
One way of doing that is to do a ring acquisition with two buffers. At anytime one of your buffers will be the most current frame and the other will be one before the most current. Having both buffers available at anytime in your code you can call IMAQ Subtract.
Hope this helps!
Yusuf C.
Applications Engineering
National Instruments

How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

How to get rid of the "time out" when using DAQ AI in the example program

I try an example file called "AcqVoltageSamples_IntClkDigRef" (Visual C++ .NET). It works great. However, if the program has not recieved the data, it sent out a timeout message. How to get rid of the "time out"? I cannot find anywhere in the code. Is this a property I have to reset somewhere else?
Thank you,
Yajai.

Hello Yajai,
The example program will use the default value for timeout, 10 seconds. To change this, you will have to set the Stream.Timeout value. I inserted this function into the example and set it equal to -1, and the program will wait indefinitely for the trigger signal without timing out. Please see the attached image to how this was implemented.
I hope this help. Let me know if you have any further questions.
Regards,
Sean C.
Attachments:
SetTimeout.bmp ‏2305 KB

How do I set up the Time Capsule without an internet connection

How do I set up the Time Capsule as a wireless hard drive without an internet connection. I am in a office situation in which I cannot access my work network. I need to be able to share files on the Time Capsule over the wire connection.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

How can i ensure that the time capsule back up all my data?

how can i ensure that the time capsule back up all my data and no any data missed during the back up? becz i was backing up my mac to time capsule for the first time and it takes only 5 hourse for 279GB which is doesnt make sense
any idea, how to ensure that all my data been backed up

well this tells you why you are having issues.. since you have a filevault and unless you are logged on as that user TM has no way to backup the vault.
so that is why the backup is so small.
And you cannot remove the file vault because the disk is too small.. you are in catch 22..
You cannot backup and you cannot remove the vault..
Login as the user who has the file vault and copy the files off the computer to a directory on the TC.. Then just delete the files on the computer.. that will then allow you to remove the file vault.
But never will I ever use file vaults so I am being theoretical .. please read it up yourself.
http://pondini.org/TM/25.html
You are not doing the background reading you need to understand what you are doing..
read the whole of pondini's info.. or at least skim it so you know what is there.
Avoid like the plague file vaults..
When disks go belly up, as they always do.. your files will be lost. Somewhere they need to be stored in the clear.. so why bother .. put better security on the computer and forget vaults.

How do you recover / restore the App Store Icon. The icon was deleted when I upgraded to 6????

How do you recover / restore the App Store Icon on my iPhones. The icon was deleted when I upgraded to 6????

The App Store cannot be deleted...
Check in All Folders and on All Pages/Screens...
Check in Restrictions...
Settings > General > Restrictions
If no joy...
Settings > General > Reset > Reset Home Screen

InDesign CS6 crashes all the time while importing an image

InDesign CS6 crashes all the time while importing an image. Does anybody knows what's going on? How can I solve this problem. Please help me cause I can't work. Thanks a lot!

AlgoritmoMX schrieb:
Thanks a lot for your quick response. I convert images to CMYK because it is best for me to see the final colors in screen when working in Photoshop. As you know, some colors (like green) have a lot of problems in rendering quite accurate when you work in RGB and then convert to CMYK (greens tend to look very vivid in RGB and then very pale and lack of contrast when converted to CMYK). In doing so, it's not reliable for me to work in RGB and then convert to CMYK in RIP or in PDF export. When working in Photoshop, you have a more precise control of color when images are in CMYK, although we all know that the respresentation of CMYK on screen is just that, a merely representation of what it sholud look a CMYK image on screen (because screen works with RGB as you know).
Also, my question and concern is that ID should let you paste images in CMYK and tiff format also (not only PSD) , so what's the point in having those features if they are not going to work at all?
This problem never happened to me in earlier versions of ID.
Thanks a lot again!
That is not true at all. You can turn on in Photoshop the CMYK proof preview which would look exactly the same as if you have converted the image to CMYK. A CMYK proof print from a RGB file with a profile has exactly the same output as if the file has been converted to CMYK under the same settings. Even if you have CMYK images, you see only a back converted RGB image on screen! This is a simulation and it is exactly the same simulation as if you would turn on the CMYK preview of a RGB image! You can see even the plates of a CMYK image.
A CMYK file has a size from 133% of the same file in RGB! So you have shuffle around in CMYK with more data than you would do with RGB images. InDesign is supposed to handle RGB images for print since version 2.0 and since CS (Version 3) it is working without problems. And it can do it better due to smaller file sizes than with CMYK! Try it and you will be astonished how much time and work you have wasted useless in converting images to CMYK.
Have a look to this discussion: http://forums.adobe.com/thread/753454
Other actions you might take is to resave the tiff image without any compression or with a different compression to force Photoshop to write the file completely new.

Copying and pasting adjustments. When I copy the adjustments of an image, I thought I could then select several images and batch paste the adjustments to all selected images. But instead it's only pasting to the first photo of the selection. What am I do

Copying and pasting adjustments. When I copy the adjustments of an image, I thought I could then select several images and batch paste the adjustments to all selected images. But instead it's only pasting to the first photo of the selected. What am I doing wrong?

Copy and Paste develop settings in Develop mode on multiple photos on the film strip works for me, even with Auto-Sync turned off. Lr5.6 OSx 10.8.5

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

What has happened to the iPad 2 finger select and drag technique? Since upgrading to iOS7 it does not work? I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the images

What has happened to the iPad 2 finger select and drag technique?
Since upgrading to iOS7 it does not work?
I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the images

What would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback

How do I batch restore the time on my NY images to 6 hours earlier in Aperture?

Similar Messages

Maybe you are looking for