How do I blend two feeds to get one good sound track

Hi,
Thanx in advance for your help.  My good camera was in for repairs so I had to shoot a Johnny Cash / Patsy Cline tribute concert with my smaller camera (no sound meters).  I balanced the feeds by jacking ear buds into the camera and balancing there.  It sounded great in the camera monitor but not so good in the recorded video.  The left channel was live mic and the right channel was a feed from the board.  I ended up with a mic feed so strong it got clipped and a board feed much weaker but not clipped.  I opened the video in Preimiere CS4 and chose "edit in Soundbooth".
I wasn't able to manipulate the tracks invididually until I converted the stereo channels to seperate audio channels.  I manipulated things until I could balance them.  The end result was OK but I'm sure it could be better.  I would appreciate any pointers or help I can get.
I can upload the tracks if anyone was interested in taking a look.
Thanx,
m

Yes, you would use a router. You can get them very cheaply, for as little as $10 or $15 dollars, but there are expensive ones with more features like Apple Airport Base Stations. My wireless router was $15 and works great.

Similar Messages

  • How can I blend two video clips where they join side by side in one movie?

    Hello Marvelous Movie Making Minds,
    I am working with Adobe Premiere 6 on a Windows 7 machine.
    How can I blend two video clips where they join side by side in one movie?
    I know how to place two or more video clips together in the same movie, but how can I give them a bit of a blend just where they join?
    I have a PDF instruction manual and the built-in web browser instructions.  In the instruction manual in "Chapter 7: Superimposing and Compositing" it talks about the transparency of any video clip, and I understand that... but I don't want to make one or the other video clip transparent anyplace except where the two video clips join together with perhaps a bit of overlap.
    I'd like to make a little blur just where the two videos join in the middle... is this possible?
    Thanks,
    digi

    Aha that kind of blending.
    Have not used 6.5 in a loooooooong time.
    So this is from memory, hope i get this right.
    Set the two clip on top of each other
    Make a matte in Photoshop and superimpose this over the two clips.
    Go to the Transparancy Settings and set the top clip in video 2 to Alpha key.
    Screendump for matte:
    The right side is made black just for the forum but should be transparant.

  • How to make a two-way process to one-way process?

    Hi,
    How to make a two-way process to one-way process?
    My requirement is:
    1. I have developed an asynchronous BPEL process, and I am calling a PL/SQL procedure using a DB adapter.
    2. The property "syncMaxWaitTime"=120 seconds in domain.xml.
    3. The partner lnk is one-way operation and it takes more than 120 secons.
    4. So my process throws TimeOut error and the transaction will be rolled back.
    5. If the transaction is rolled back then the instance will not appear in the console.
    6. The wired thing is the call to DB is actually doing the complete task successfully even it takes more than 120 sec.
    7. Is there a way where I can handle this Timeout exception and bring the transaction to complete normailly?
    What I am expecting a solution like [http://download-uk.oracle.com/docs/cd/B31017_01//integrate.1013/b28981/events.htm].
    I tried this example, but in my process I am not getting onResult operation as my process is one-way process? Is there a way where I can make this a two-way operation, after taht I will try to use the Pick activity as shown in the above example.
    --Khaleel

    Hi Khaleel,
    Please refer 122.DBAdapter/advanced/endToEnd/DirectSQLPerformance/README.txt in bpel/samples/tutorials.
    See the "A-Sync to Synchronous " section to convert the asynchronous process initiated by DB adapter to a Synchronous process.
    In your case the problem can be solved by creating a synchronous BPEL process and invoke the asynchronous process initiated by DB adapter in it. You can add the pick activity in the synchronous BPEL process to monitor the timeout.
    Best Regards
    Meenal Orkey

  • How can I have two itunes accounts on one computer?

    How can I have two itunes accounts on one computer?

    Not sure what you mean.
    An account is a user name and password.
    Sign into whichever account you want to use for purchasing.
    Authorize the computer for both account to listen to the content.

  • How can I combine two itunes accounts into one?

    How can I combine two itunes accounts into one?

    Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased.  Apple provides no way to change this.
    However, if you wish to put content from two accounts into a single iTunes library, you can easily do so.  Use the command File > Add File (or Folder) to Library.

  • HOW DO I INSTALL TWO DIFFERENT ITUNES ON ONE COMPUTER

    how do i install two itunes accounts on one computer using windows 7

    By creating a second user account for the other person.

  • How do I combine two iTunes accounts to one.?

    How do I combine two iTunes accounts into one?

    iTunes Account = Apple ID...
    From Here   http://support.apple.com/kb/HE37
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

  • Product didn't work. I want a refund. How do I contact customer service to get one?

    Product didn't work. I want a refund. How do I contact customer service to get one? I can't seem to find an email address or phone number. All I could do was turn off auto-renewal.

    you are writing to the wrong e-mail  address you need to contact Sara at
    Adobe
    VISIT THE THREAD IN THE FORUM for messages
    Thanks
    On Thu, Sep 18, 2014 at 11:10 AM, Joana Franco <[email protected]>

  • SQL*Plus two fetches for getting one row.

    Hi all.
    I have tested following script.
    alter session set events '10046 trace name context forever, level 12';
    select * from dual;And achieved such results (extract from .trc file).
    SQL*Plus: Release 11.2.0.1.0; (Oracle Version 10.2.0.4.0, 11.2.0.1.0)
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        1      0.00       0.00          0          0          0           0
    Execute      1      0.00       0.00          0          0          0           0
    Fetch        2      0.00       0.00          0          0          0           1
    total        4      0.00       0.00          0          0          0           1SQL*Plus: Release 8.1.7.0.0; (Oracle Version 8.1.7.0.0)
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        1      0.00       0.00          0          0          0           0
    Execute      2      0.00       0.00          0          0          0           0
    Fetch        2      0.00       0.00          0          1          4           1
    total        5      0.00       0.00          0          1          4           1Allround Automations PL/SQL Developer 8.0.4; (Oracle Version 10.2.0.4.0, 11.2.0.1.0)
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        1      0.00       0.00          0          0          0           0
    Execute      1      0.00       0.00          0          0          0           0
    Fetch        1      0.00       0.00          0          0          0           1
    total        3      0.00       0.00          0          0          0           1Allround Automations PL/SQL Developer 8.0.4; (Oracle Version 8.1.7.0.0)
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        1      0.00       0.00          0          0          0           0
    Execute      1      0.00       0.00          0          0          0           0
    Fetch        1      0.00       0.00          0          1          4           1
    total        3      0.00       0.00          0          1          4           11) I can't figure out why sqlplus does TWO fetches for getting ONE row (instead of pl/sql developer).
    8i raw trace
    PARSING IN CURSOR #1 len=31 dep=0 uid=0 oct=3 lid=0 tim=0 hv=3549852361 ad='4a0155c'
    select 'hello world' from dual
    END OF STMT
    PARSE #1:c=0,e=0,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=4,tim=0
    BINDS #1:
    EXEC #1:c=0,e=0,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=4,tim=0
    WAIT #1: nam='SQL*Net message to client' ela= 0 p1=1111838976 p2=1 p3=0
    FETCH #1:c=0,e=0,p=0,cr=1,cu=4,mis=0,r=1,dep=0,og=4,tim=0
    WAIT #1: nam='SQL*Net message from client' ela= 0 p1=1111838976 p2=1 p3=0
    FETCH #1:c=0,e=0,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=0,tim=0
    WAIT #1: nam='SQL*Net message to client' ela= 0 p1=1111838976 p2=1 p3=0
    WAIT #1: nam='SQL*Net message from client' ela= 0 p1=1111838976 p2=1 p3=0
    STAT #1 id=1 cnt=1 pid=0 pos=0 obj=195 op='TABLE ACCESS FULL DUAL '11g raw trace
    PARSING IN CURSOR #3 len=30 dep=0 uid=96 oct=3 lid=96 tim=1581355246985 hv=1158622143 ad='b8a1bcdc' sqlid='5h2yvx92hyaxz'
    select 'hello world' from dual
    END OF STMT
    PARSE #3:c=0,e=130,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1388734953,tim=1581355246984
    EXEC #3:c=0,e=40,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1388734953,tim=1581355247154
    WAIT #3: nam='SQL*Net message to client' ela= 7 driver id=1111838976 #bytes=1 p3=0 obj#=-1 tim=1581355247252
    FETCH #3:c=0,e=18,p=0,cr=0,cu=0,mis=0,r=1,dep=0,og=1,plh=1388734953,tim=1581355247324
    STAT #3 id=1 cnt=1 pid=0 pos=1 obj=0 op='FAST DUAL  (cr=0 pr=0 pw=0 time=0 us cost=2 size=0 card=1)'
    WAIT #3: nam='SQL*Net message from client' ela= 193 driver id=1111838976 #bytes=1 p3=0 obj#=-1 tim=1581355247735
    FETCH #3:c=0,e=2,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=0,plh=1388734953,tim=1581355247800
    WAIT #3: nam='SQL*Net message to client' ela= 5 driver id=1111838976 #bytes=1 p3=0 obj#=-1 tim=15813552478552) Is there any possibility to view data provided by each fetch?
    Thanks in advance!
    P.S.
    SQL> sho arraysize
    arraysize 15

    Thanks.
    I have tested two statements.
    select 'hello world' from dual where 1=1;
    select 'hello world' from dual where 1=0;When query returns no data, there is only one SQL*Net roundtrip (and one fetch)
    SQL> set autot on statistics
    SQL> select 'hello world' from dual where 1=1;
    'HELLOWORLD
    hello world
    Statistics
              0  recursive calls
              0  db block gets
              0  consistent gets
              0  physical reads
              0  redo size
            528  bytes sent via SQL*Net to client
            492  bytes received via SQL*Net from client
              2  SQL*Net roundtrips to/from client
              0  sorts (memory)
              0  sorts (disk)
              1  rows processed
    SQL> select 'hello world' from dual where 1=0;
    no rows selected
    Statistics
              0  recursive calls
              0  db block gets
              0  consistent gets
              0  physical reads
              0  redo size
            329  bytes sent via SQL*Net to client
            481  bytes received via SQL*Net from client
              1  SQL*Net roundtrips to/from client
              0  sorts (memory)
              0  sorts (disk)
              0  rows processedBut in both cases i found in client trace this sequence of bytes:
    ] nsprecv: 00 00 36 01 00 00 00 00  |..6.....|
    ] nsprecv: 00 00 00 00 00 00 00 00  |........|
    ] nsprecv: 00 00 90 19 43 13 00 00  |....C...|
    ] nsprecv: 00 00 00 00 00 00 00 00  |........|
    ] nsprecv: 00 00 00 00 00 00 00 00  |........|
    ] nsprecv: 00 00 00 00 00 00 00 00  |........|
    ] nsprecv: 00 00 00 00 00 00 00 00  |........|
    ] nsprecv: 00 00 00 00 00 00 00 00  |........|
    ] nsprecv: 00 00 00 00 00 00 00 00  |........|
    ] nsprecv: 00 00 00 00 00 00 00 00  |........|
    ] nsprecv: 00 00 19 4F 52 41 2D 30  |...ORA-0|
    ] nsprecv: 31 34 30 33 3A 20 6E 6F  |1403:.no|
    ] nsprecv: 20 64 61 74 61 20 66 6F  |.data.fo|
    ] nsprecv: 75 6E 64 0A              |und.    |In first case - it was in 2nd packet and in second case (query returns no data) - part of 1st packet.

  • How can i sync two different ipods to one computer

    How can i sync two different ipods to one computer

    How to use multiple iPods, iPads, or iPhones with one computer

  • Failed to get procs for sound track -2126

    What is the meaning of the error message of "Failed to get procs for sound track -2126"? I am attempting to convert a Quicktime movie file that uses Sorenson Video & QDesign Music 2 codecs.

    Certainly someone must know the meaning for this error message. Is there a list of error messages for compressor and QT??

  • Failed to get pprocs for sound track -2126

    What is the meaning of the error message of "Failed to get procs for sound track -2126"? I am attempting to convert a Quicktime movie file that uses Sorenson Video & QDesign Music 2 codecs.

    You've got to give us a little bit more to go on.
    What, exactly, are you doing? Converting your Sorenson Video 3-codec QT file in Compressor? What version of Compressor? What happens if you try this same thing in QT Pro?

  • How can I combine two video files into one finished file?

    I'm making a video of a guitar player.  I'm using two cameras simultaneously.  One gives the overall wide shot, and the other is zoomed in on his hands.  Both cameras run at the same time.  I would like to use the wide shot as the main video, and occasionally fade in clips from the zoomed in shot to show details of his playing.  I can manually line up both files so they are synchronized.  How do I cut a clip out of the main (wide) shot, leave the gap there, and insert a clip from the closeup?  I'm putting the two video files on two of the video timelines and synchronizing them that way.
    Any suggestions on how to proceed?

    The effect you are looking for is 'Picture in Picture'. If you want the gap to be there for the duration of the timeline add some 'black video' - from the Tasks Pane> New Item - on the video track above the main track. Resize / position it to where you wish it to be.
    Then with your second clip (now on video track 3)
    Do the same sizing / positioning for it.
    split video and audio and delete or disable the audio.
    Cut it where you want the various start/ends of the fade to be.
    Delete, or just disable (right-click) the unnecessary segments.
    Apply fade in / out to the remaining segments.
    [EDIT]
    Also check out the 'Presets' in Video Effects. There are a variety of PiP presets that may do what you need.
    [/EDIT]
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • How do you create two apple ids for one email address.

    I bought two i pads for my kids. Since we have just one email address, everytime I try to create a new apple id it says I already have one. They need separate ids so their friends can facetime with one and not the other. Can't figure out how to create two apple ids with one email address.

    Donnathemom wrote:
    Well any ideas on how to solve this problem? When my daughter does facetime with someone it says she's Wyatt. She's not real happy about that. 
    Get her an email address, even if she never uses it.  They're free and available almost everywhere.  The only requirement is that the address be a valid one.
    Edit...
    You can even use an "alias" of yours.  That's a fake address that actually sends everything to you.  Check with your current email supplier.

  • How do you link two audio clips to one video clip?

    Hi guys,
    I want to think multiple audio clips to one video clip and aint know how to do it! I found this page on Adobe knowledge base:-
    http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS1c9bc5c2e465a58a91cf0b 1038518aef7-7f40.html
    It says you can do it but I don't think it explains how? Can anyone provide me with the simple steps required to link two audio clips to one video clip? Many thanks.

    Do you mean manual syncing? I've been reading this thread about workaround, which aren't working for me: http://forums.creativecow.net/thread/344/21236
    But the question they are asking is the same one I am asking. Isn't this a typical situation, having multiple mics for one camera? For example, if someone filmed a concert with one camera but used both the camera audio, and ambient mic, and a mix from the board, then that would be 3 audio tracks with 1 video track. I'm in a similar situation, and I'm finding it hard to believe that FCPX isn't equipped to edit this way. There must be some way to get one video clip (with reference audio) to sync with four audio tracks.

Maybe you are looking for