How do I bold text in safari? (Not in mail)

I can't seem to figure this out. I am trying to do this on the web, in a message board, not in mail. I think this makes a difference. Thanks.

Each website has restrictions or text editors of their own. No setting on a computer or iPad will change it.
You might look for advanced text editor functions which my iPad has for the Apple forums. You may notice it just above the text box on the right.

Similar Messages

HT2506 How can I bold text in the notes that I write in Preview?

Any way to create a shortcut key for this? Command-B doesn't work...

Try going to System Preferences/Keyboard, selecting Application Shor...., clicking the + button, which will bring up the following screen. You can then Select Preview where All Applications is shown and try to create the command.

How do I convert batch convert text files to Notes in Mail?

I have a bunch of text files (originating from Mark/Space Memopad, put exported as text files) that I want to turn into Notes in Mail. (Eventual goal: having sync-able memos 'tweeen Mac and iPhone.) So, how do I turn text files into Notes. I know the basic idea: change the extension to emlx (easy), give them a nice sequence of distinct names (182342.elml, 182343.emlx...)(Thank you Name Mangler). The hard part is sticking the header material in. If it were just one or two or three or even ten files, I'd just do it by hand (make a new note, cut and paste, repeat). But it's 250+.

have you tried typing this question into your preferred search engine? If not, please do, as you will find the answer there.

How to Read the text enetered in Notes Tab of Invoice Doc. ( FB60, MIRO )

Hi All,
We are trying to read the Text Entered in Notes Tab of Invoice Doc using the tcode FB60, MIRO..
We are able to see the text when we use these tcode but can you please help us how to read these deatils in a program..
We wanted to download these notes corresponding to the Invoivces..
Thanks in Advance....
Regards,
Vidya.

Hmm..you will get lots of links if you search the forum/google..
Anyway - keep a breakpoint in SAVE_TEXT/READ_TEXT function module and create/display MIRO and FB60 documents - this tell you how it stores and reads long text.
You should use READ_TEXT in your program with same header inputs with respective TDOBJECT and TDNAME parameters.

How to set Default text when sending a blank mail from SAP

Hi all,
How to add Signature with company logo in the mail body.
User should see at least one default text (eg; Hi) in the mail body if the sender did not type any text in the mail body when sending a mail from SAP.
Is it possible to set like this on Subject also.
Kindly share your ideas.
Regards,
Mathan A

Hi Mathan,
Please check sap note
SAP Note No. 1304146 Email Signatures feature note
1163250 - How to Create an Email Signature on several rows
I hope it will solve your issue.PLease mark thread as answerd.
Best Regards,
Atul

How to display bold text in JTextPane and how to get them?

I need show some fonted text like BOLD, UNDER LINE, can some body tell how to do it? for example, how to show the following sentences?
"This is This is a test of the formatting option end of"
in JTextPane?

Hi Juergen,
I found Your blog and found it really interesting... though I was not able to use it: I (like Jun Li is asking, I guess) need to use a dynamic text, containing formatting informations (according the xhtml syntax).
I tried to pass it to the form by an ABAP-dictionary based interface and by means of the context (in a webdynpro page), but both tries failed.
Some suggestion will be greatly appreciated.
Thankyou
Simone

PDF has some bold text that should not be bold

In the Word document the text is not bold and when the PDF file is viewed it is not bold, but when the PDF file is printed, the text is bold.
Using Windows 8.1, 64 bit - Adobe Reader 11.0.9 - Office Word 2013

Thanks for your interest
I went to File - Save As - and then took the PDF option of how to save the
Word document. When viewing the PDF from the Save As, the text is not
bold, it become bold when the PDF is printed.
On Sat, Nov 1, 2014 at 8:57 PM, Pat Willener <[email protected]>

How to format bold text in SENDTASKDESCRIPTION method?

Hi Gurus,
I'm using the SENDTASKDESCRIPTION method of SELFITEM object to send a message to an user's inbox in SBWP tx.
The description task has formatted text in bold using <H>Example</>. But at moment to display the message in user's inbox the text appears plane, without bold characters.
How can I do to display the text formatted in bold?

Hi Gurus,
I debuged the method and found that the text is sent without format (ASCII).
The method used the FM SWU_GET_TASK_TEXTLINES and only obtain the "ascii_text_lines" table:
CALL FUNCTION 'SWU_GET_TASK_TEXTLINES'
EXPORTING
 task = workitem_task
 usage = 'W'
 linewidth = line_width
 language = send_language
 container_handle = wi_container
TABLES
 ascii_text_lines = text_lines
EXCEPTIONS
 wrong_usage = 01
 text_not_found = 02
 text_system_error = 03.
This is the reason because the method don't sent the text in bold.
One option is to create a subtype object with a method to send the email in HTML format (Thanks for Pavel García for this tip)

How do I select text on safari

I have not been able I select text since I upgraded I iOS7. Did you change how you select it or is it just no longer possible? Please help me

Does it work on other websites?
If not then:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Please someone has to know how to delate the text box and not the word or the page

HI
someone has to help i am trying to make a wedding invites on word but we dont want the text box how do you get rid off it with out dealeting the page.
What is a good progame to use to created wedding invites?

Then you should probably post your question on the Microsoft Mac forums since it's their software you have questions about...
http://answers.microsoft.com/en-us/mac

Simple Question: How to make a text subpicture highlight not appear by default?

I'm sure I am missing some very easy one-button solution here, but here goes...
I have a menu with just one single button on it. I have the 'Create Text Subpicture' box checked in the button properties panel. What I want is for the highlight to appear only when I roll over the button. But when I preview the menu, the button highlight is on automatically. It functions just fine. I just need to solve this one little highlight issue.
Is it as easy as I am thinking it is?
Thanks!
bobby

How do I assign rollover states? I've looked but can't find any reference to it.
Thanks!
bobby

How do I highlight text in an Outlook e-mail in Firefox?

I use Firefox for Outlook e-mails because IE keeps shutting down when I add an attachment. However, I see no option for highlighting text in an e-mail, only bold, etc.

I couldn't find an add-on, so I created a bookmarklet. This is a "button" you drag to your Bookmarks Toolbar which instead of loading a web page runs a script on the current page. To give it a try, you can install the bookmarklet from the following page:
http://dev.jeffersonscher.com/bookmarklets.html#olhilite
Then when you have highlighted text in your message, click the button to give it a yellow, cyan, or green background. If you prefer another color, you can edit the script (I can describe how). Unfortunately, these are not bidirectional, meaning, there's no way to use them to remove or change the highlighting. But maybe it's better than nothing.

How to change message text encoding in multiple e-mail messages?

Hello!
I'm newcomer in AppleScript. I have imported a lot of email messages from mbox.
The problem is that some of messages are displayed in correct russian encoding (KOI8-R) but
other messages displayed with incorrect encoding. So i need manually set their encoding
via mail menu to Cyrillic (Windows) to be able to read them. I got about 1000 of those messages.
Is there any possibility to mark those messages in mail and then run AppleScript to change
their encoding automatically?
something like that (that script is not working one):
tell application "Mail"
set selectedMessages to selection
if (count of selectedMessages) is equal to 0 then
display alert "No Messages Selected" message "Select the message you want to get the raw source of before running this script."
else
set message text encoding to "Cyrillic (Windows)"
end if
end tell
Thanks!

I was able to get it to work on all selected emails using this script:
(Note I changed the encoding to "Simplified Chinese (EUC)")
using terms from application "Mail"
tell application "Mail"
set theMessages to selection
tell message viewer 1
repeat with themessage in theMessages
set selected messages to {themessage}
activate application "Mail"
tell application "System Events" to ¬
tell menu item "Simplified Chinese (EUC)" of menu 1 of ¬
menu item "Text Encoding" of menu 1 of ¬
menu bar item "Message" of menu bar 1 of ¬
application process "Mail" to if (exists) then click
end repeat
end tell
end tell
end using terms from

How do I enable text drag and drop in Mail?

Simple enough question. I'm sure I had this at one time in my Mail app, but it doesn't work now, and I see nothing in Preferences to enable it. Can anyone tell me what I'm missing?
Rob

Just found the problem. The old Kensington Turbo Mouse I was using won't work with drag and drop. It doesn't work even when I dedicate one of the four buttons specifically to Drag. Attaching the regular mouse solves the issue.
(Though not, interestingly, with the text in InDesign, the application I'm using throughout the day).
Rob

Bold text in smartforms

Hi guys,
How to make bold text in a paragraph?
for eg:
Snow showers are likely to affect eastern parts of Scotland for much of the day. Heavy showers across southern England will move northwards into South Wales during the afternoon. These will be generally of rain. Cold and sunny elsewhere.
I want to make " parts of scotland" and " Cold and sunny " into Bold .
plz advise..
thanks
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Dec 23, 2009 4:28 PM

Hii
U need to create smartstyles for this purpose.
In smartstyles u hv to create charcter type for bold . for eg as C1.
Assign this smartsyle in smartform.
In paragraph write as
Snow showers are likely to affect eastern <C1>parts of Scotland </> for much of the day. Heavy showers across southern England will move northwards into South Wales during the afternoon. These will be generally of rain. <C1> Cold and sunny</> elsewhere.
Edited by: Tanujaw on Dec 23, 2009 11:53 AM
Edited by: Tanujaw on Dec 23, 2009 11:54 AM
Edited by: Tanujaw on Dec 23, 2009 11:54 AM

How do I bold text in safari? (Not in mail)

Similar Messages

Maybe you are looking for