How do I booklet print on duplexing printer?

Back in the good old days on OS 9 I could click a button in the print menu of the adobe print driver and print any multipage 8 1/2 x 11 document as a booklet on 11 x 17 paper on my HP 5000 or my HP8150 duplexing printers.
I can't find a similar way of operating in os10.
Any suggestions.
G5   Mac OS X (10.3.9)  

I dug deeper into the discussions and found a cocoa app that seems to do the trick

Similar Messages

  • How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series?

    How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series from my PC  using windows 8?

    Thanks for your reply.  
    Looks like I didn't do enough research as the HP site said it's available however upon further investigation only manual duplexing is available with drivers installed.
    http://www8.hp.com/ca/en/products/printers/product-detail.html?oid=5166605
    Drive productivity and save paper, using automatic two-sided printing

  • HP4700 print order duplex printing

    We have a 4 bin HP4700 color laserjet in the office. The top bin (2) has a printed letterehead. This works fine if you print single-sided (simplex) but if you tick the box to print Duplex in Finishing it prints the first page on the BACK of the paper and UPSIDE DOWN.
    Is there anyway to set the printer to handle the paper the same way for both simplex and duplex printing.  I have tried fooling it by telling it to print duplex on a single sheet but it won't.
    It is not practical to have to keep turning the paper over and around every time you want to print double-sided.

    Depending on what application you are using, you might have the option to tell it there is letterhead in one of the trays.
    Also,  Use the HP Enterprise driver to print.  It has the best support for the printer.
    http://h20566.www2.hp.com/hpsc/swd/public/readInde​x?sp4ts.oid=471583&lang=en&cc=us
    Please mark the post that solves your problem as "Accepted Solution"
    Sometimes it takes several posts back and forth to get to a solution - please be patient.
    I am employed by HP

  • CP2025dn printer, automatic duplex printing

    Recently, after a couple of updates, the CP2025dn printer only allows manual duplex printing.  Operating system is Windows 7.  Where do I get a driver supporting duplex printing or what do I need to do to turn on 'automatic' duplexing? 
    HP is starting to get under my hide!

    Probbably because the M451nw model does not have a duplex unit - you'd need the M451dn or M451dw model for automatic duplexing. The best that can be done with the M451nw is manual duplexing (where odd sides are printed first, then the driver instructs you to take the printed pages and place them back in the input tray, then prints the even pages - or perhaps evens, then odds? ), provided that the driver in use supports this.

  • Extra Blank Page Printing When Duplex Printing on HP 8610

    Whenever I do duplex printing, before the 1st page of the document prints, a blank page comes out of the printer. The document itself prints okay in 2 sided mode.

    Welcome to the HP Community , I understand when you duplex print from your Windows Vista system, your Officejet 8610, a black page prints before the document actually prints out. I hope to help you with my suggestions. To get started, try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. Please let me know the outcome! Try printing again now to see what happens. Also, test print from more than one program, which will tell us if the issue is within one program on your PC, or with the printer driver itself. I hope to hear from you!

  • How to reverse print (not duplex print) on Deskjet 6500 E71n?

    I am making t-shirt transfers. I need to reverse print, sometimes called mirror print, so that when the design is ironed on to a t-shirt it isn't reversed?

    What operating system? For Windows 7 there is a Mirror Image checkbox in the Finishing tab.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How do i set up duplex printing in windows 8

    HP Deskjet 6980
    Win 8 pro 64bit
    how do i gwt support for duplex printing as the basic driver installed does not support it ?

    sdsjp04, I would recommend disconnecting the printer from the computer and uninstalling/removing the printer from Programs and Features, Device Manager, and Devices and Printers.
    Then follow this link for the full feature drivers:
    http://goo.gl/o9H7w
    Let me know how this goes!

  • Booklet printing - duplex printer

    I am trying to print a 32-page booklet on a duplex printer.  Everything seems normal in the print preview window, but on the actual print roughly 1/3 of the content is cut off from the tops of pages 2 and 16.  What am I doing wrong?

    This is the config I´d managed to make it work.
    My first difficulty was that my printer´s options is a bit too complex(Layout, Quality, Duplex options,....), mixing that with the many combinations of options we need to fullfil in Adobe Reader aswell...far from good. I wish there was a option in my canon mp560 setup to let it print using only adobes settings. Would be easier.
    Adobe Acrobat Reader:
    First, at the bottom left,
    Page Setup = Landscape
    Hit Ok
    Print Range = All
    Page Handling:
    Booklet Printing
    Both Sides
    Auto Rotate
    Bind Left
    Then, at the bottom: Printer...
    Printer: Canon...
    Layout:
    2 Pages per Sheet
    Paper Handling:
    Check the Scate to Fit: (A4) or whatever paper size you´re printing
    Cover Page:
    None
    Duplex Printing & Margin:
    Check the Automatic Duplex Printing
    Print Area = Use reduced printing
    Stapling Side = Shot-side stapling (Top)
    Hit Print, then Ok in Acrobat Reader.
    It should print fine, as it did to my small document.

  • How do I correct odd page upside down while duplex printing?

    My MX870 prints every other page upside down while printing a catalog in duplex mode.  How can I correct this? The catalog was written using MSWord 2007. Obviously, I can manually duplex the catalog. I am praying there is a solution to be able to automatically duplex.
    Thank you.

    After 3 days of futile efforts to solve odd page upside printing in duplex print. The problem was solved as follows:
    Go to the print menu
    1. Go to quick setup
    select "Preview - Duplex - Paper size - Orientation [make sure document and printer orientation are the same}
    2. select "page setup "
    on page layout select "normal size print" - "duplex automatic" - "stapling left side"
    Print area setup  "select - used reduced printing"       Selection of " use reduced printing" is the key to solving the problem
    3.  Problem solved

  • Duplex printing in adobe reader XI

    Ladies and Gentlemen,
    I write because I have a problem with two-sided printing PDF files in Adobe Reader XI.
    Summary of the problem:
         When printing a PDF file that contains two pages I select the option "Print on both sides of the paper" parameters "by Flip on Long Edge" and the orientation of the "Auto. Vertical / horizontal. The result of these operations, when I print. Is that the first page prints correctly. On the back of the cards are printed the information from the second page in the correct format, but with the information from the first in a unique way, namely by me look as if they were printed in a mirror image.
         Prior to printing that is done smoothly, printed data to improve on the first and on the other side. Unfortunately, I am unable to say what was the turning point after which it changed, because I'm not a direct user of this computer. The printer supports duplex printing function, of course. Other programs such as Word office document are printing correctly on both sides as expected.
    The steps that I took to correct the problem:
    1. Restart your computer.
    2. Restart the printer.
    3. Re-install the program Adobre Reader.
    4. The use of different combinations of print settings in Adobe Reader.
    The type of computer:
    -Computer PC.
    -Operating-System: Windows XP SP3.
    -Printer Connected directly to the computer using the USB cable.
    Sincerely

    Thanks for the option.  It did work setting the print as image on.  Does this mean there is something wrong with how the PDF was created or that Adobe Reader is just having a problem reading it?
    Jason Kuhns
    Sr. Design Technician
    Description: Description: Description: cid:[email protected]
    Knowledge/ Creativity/ Innovation
    www.kci.com<http://www.kci.com/>
    1431 Greenway Drive, Suite 775
    Irving, TX  75038
    Office:  972-957-3016
    Cell:  571-308-5364

  • Duplex printing problem with Reader Upgrade

    I upgraded Acrobat Reader 10.1.8 to 11.0.4 and can no longer access fast or duplex printing for PDF's. I have a Canon MP970 printer for 3 years and have always been able to do both fast printing and duplex printing of PDF's.
    How do I resolve?

    I have an identical issue to neuegestaltung, but with an HP 5500. I can print single-sided to A3/tabloid successfully but when I try printing duplex the right quarter of the page is cut off on both sides - almost as if it thinks it's printing portrait.
    Applications affected include Adobe Acrobat 8 and 9, Adobe CS3 and CS4 applications including InDesign.
    Preview works fine, but of course the colour balance makes the output unusable.
    OS 10.6.2, print driver HP Color LaserJet 5500 v 3010.107.
    Using the Gutenprint driver I can't either do A3 or colour so there is no solution there.
    Worked fully and correctly with the same apps under 10.5.x.
    At the moment I am running Windows XP under VMWare to print from Acrobat, which is plainly silly.
    Any useful* observations, suggestions or workarounds welcome.
    *Needless to say, "It's Adobe's problem" or similar are not acceptable responses. It may well be an interaction between the Adobe's applications and Apple's printing system and/or driver of course; in that case the companies need to collaborate to solve the issue.

  • How do I set up pages to print a 5x7 catalog using doubled sided printing. When I try this layout the inside pages are upside down?

    I am trying to print a 5 x7 catalog. When I print it out using doubled sided the inside pages are upside down. Is there a way to setup and print using a 5x7 format?

    If your printer does duplex printing (i.e. you're not re-feeding the pages manually), there may be a setting in the print dialog. My Brother color laser has these option when I check the two-sided box. If you see something similar, test the various options & make a note of what works. It took me so many tries to figure out what they meant by long- or short-edge binding!
    If you're using something like CocoaBooklet or another program to create a booklet, see if it has an option to turn the second side upside down.

  • Turning duplex printing on and off

    How do I turn OFF the duplex printing? I many times do NOT want duplex printing and only one one side per page. I use an iMac 10.10 and have an HP Officejet 6830e All-in -One

    Hi,
    Follow these steps to disable two sided printing:
    Open the file you would like to print. From the File menu select Print. The Print window appears.
    NOTE: The Print window might be minimized. Click the Show Details button to see all available settings.
    Click the settings drop down, it will usually appear as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.
    Select Layout from the drop-down menu.
    Set the Two-Sided option as Off.
    You may save the settings as a preset by clicking Presets > Save Current Settings as Preset...
    By doing so and completing the print job these settings will remain default till another preset will be used in the future.
    Regards,
    Shlomi

  • Crystal report 11 - duplex printing ???

    Hi, I have a problem with duplex printing. Our printer supports duplex printing. When I print a document from Windows7, the printer prints on both sides of the sheet - that is correct, but when printing from our information system (information system used CR11 to display reports), the printer prints each page of the document on a separate sheet - so it is not duplex.
    How can I solve this problem? something has to be set in the report design?
    Thanks

    Hi,
    See this links, it may be helpfull:
    http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/40e40899-721e-2b10-b084-c7ed76af46f1?quicklink=index&overridelayout=true
    23page
    Default printer settings in CR rpt file
    http://www.forumtopics.com/busobj/viewtopic.php?p=731859
    http://www.crystalkeen.com/articles/crystalreports/duplexprinting.htm
    All the Best,
    Madhu...

  • Duplex printing problem with hp 9500 (right side always just half printed)

    Since OS X 10.6 was released there is a problem with the print out of duplex printed pages (specially via Indesign CS4 broschure printing function). Using Mac OS X 10.5.8 with old and new driver everything is fine - but under 10.6, 10.6.1 or 10.6.2 neither old nor one of the new driver releases 2.1, 2.2 or 2.3 will work.
    When I´m trying to print a duplex printing page the print of the right page will be cutted off at the half of the page - like the page would not print A3 horizontally but vertically (so the rest is cut off). The new print features within the printing menu (manual duplex print and print broschure will have same effect but with a strange miniaturization to A5 - although it should be A4). All in all the is no way to print out a duplex printing with OS X 10.6 and hp 9500. Will there be any solution in sight? Are there other with the same effect?

    I have an identical issue to neuegestaltung, but with an HP 5500. I can print single-sided to A3/tabloid successfully but when I try printing duplex the right quarter of the page is cut off on both sides - almost as if it thinks it's printing portrait.
    Applications affected include Adobe Acrobat 8 and 9, Adobe CS3 and CS4 applications including InDesign.
    Preview works fine, but of course the colour balance makes the output unusable.
    OS 10.6.2, print driver HP Color LaserJet 5500 v 3010.107.
    Using the Gutenprint driver I can't either do A3 or colour so there is no solution there.
    Worked fully and correctly with the same apps under 10.5.x.
    At the moment I am running Windows XP under VMWare to print from Acrobat, which is plainly silly.
    Any useful* observations, suggestions or workarounds welcome.
    *Needless to say, "It's Adobe's problem" or similar are not acceptable responses. It may well be an interaction between the Adobe's applications and Apple's printing system and/or driver of course; in that case the companies need to collaborate to solve the issue.

Maybe you are looking for