How do i boost the strength of the signal to reach the remote parts of my house?

how can i boost the strenght of my wifi signal to reach the remote parts of my house?

Thanks for the info.
The AirPort Express would be a good choice to "extend" the wireless signal.
The best way to do this is locate the Express in the middle of the remote area that needs more coverage and then connect an Ethernet cable from the Express back to the AirPort Extreme.
If you cannot run the wiring, the Express can be configured to extend the signal using wireless only, but things are always "iffy" in this type of setup. When you do it this way, the Express must be located where it can receive a good wireless signal to be able to extend it.
That would generally be a location about half way between your AirPort Extreme and the general area that needs more wireless signal coverage. The potential problem here is obstructions since each "normal" wall in a home will absorb anywhere from 15-25% of the signal. A ceiling, since it is thicker will absorb even more.
Unfortunately, it's really not possible to say with accuracy whether extending using wireless only will do the job that you want. You could try it that way....but it would be wise to keep Plan B in mind....in case Plan A does not work out.

Similar Messages

HT3919 In the past was able to adjust the memory for each individual application, my Illustrator CS5 appears is doesn't have enough memory to complete a particular project. How do I boost the amount of memory that Illustrator uses so I can complete my pro

In the past I have always been able to adjust the memory of each individual application,
my Adobe Illustrator CS5 appears that is doesn't have enough memory to complete a particular project.
How do I boost the amount of memory that Illustrator uses so I can complete my project?

With OS X, it automatically allocates RAM and it can't be allocated manually.
What model Mac do you have and what OS X version is it running. Your profile shows a PowerMac and OS 10.6.8. A PowerMac can't run OS 10.6.8. It's max OS is 10.5.x
How much RAM is installed in your Mac? You need to max out the RAM and close other open apps if you are having problems with Illustrator.
 Cheers, Tom

How do I disable the remote on my MacBook Pro

How do I disable the remote on my MacBook Pro, every time I use my remote for my Apple TV iTunes starts playing.

System Preferences --> Security & Privacy (click on lock in lower left corner and enter security info to make changes --> this will activate the "Advanced" button in the lower right corner --> click on it) --> Advanced --> Check the bottom box: "Disable remote control infrared receiver" --> Joy!

How do I get the remote to my apple tv to stop affecting my macbook?

How do I get the remote to my apple tv to stop affecting my MacBook Pro? Right now every time I hit play or up and down it affects the volume and the play mode on the MacBook.

https://discussions.apple.com/message/12317173#12317173
more hits
https://www.google.dk/search?client=opera&q=make+apple+tv+remote+not+control+mac book&sourceid=opera&ie=UTF-8&oe=UTF-8

I bought a Elements 12 Software bundle 3 weeks ago. How do I redeem the other part of the product I paid for?

I bought a Elements 12 Software bundle 3 weeks ago. How do I redeem the other part of the product I paid for?
I bought a Elements 12 Software bundle 3 weeks ago.But I only redeemed,'Premier Elements' with the code it gave and had a separate code for Elements 12 , wich I wrote down but did not use at that time. Now I have made space on the PC, I want to download the Elements 12 part of my bundle but its proving impossible. How do I redeem the other part of the product I paid for? The serial number retrieval code, from the card I bought comes up as Invalid now.

Serial number and activation chat support (non-CC) may help
http://helpx.adobe.com/x-productkb/global/service1.html

How do you set the remote only to work with the MacBook and not the Hi-Fi.

I have a Hi-Fi Apple stereo hooked up to my Macbook but when I use the Apple remote, it controls both things.
So if I am scrolling through my music in Frontrow then the volume on the Hi-Fi stereo is turning down or up depending on which way I am scrolling.
My question is:
How do I make the remote work with only my MacBook?

Pair the remote with your macbook by isolating it point the remote at it while holding down the menu and next buttons. You see like a chain appear and that will mean the remote is paired. Now only the macbook will only respond to the macbooks remote. Do the same with the Hi-Fi remote and now the hi-fi will only work with the hi-fi remote.

How do I disconnect the remote on the imac

Hi
How do I disconnect the remote on my Imac, I have a Apple tv in the same room, so the sounund is going up and down..
Henrik

Go to System prefs>Personal>Security & Privacy>General>Advanced (enter Admin password if prompted) - check the 'Disable remote......' and 'ok'.
MJ

How do I access the remote(requesting) clients IP address through the Portal API?

How can I access the remote(requesting) clients IP address through the Portal API?
On our 4.5 - IIS system, we can acces it using the Request.ServerVariables("Remote_Addr") in the ASP pages.
We are deploying 5.0 on Java Portal and would like to be able to do this through the Portal's API so I can call it in one of our custom login Activity space or control etc.
I have looked documentation for the HTTPServletRequest object. It seems like we should be able to access it through one of the methods getRemoteAddr if we can get a handle to HTTPServletRequest object through the Plumtree's framework.
I think the XPRequest object encapsulates the HTTPServletRequest but I didn't see getRemoteAddr method listed in the Javadocs.
Is there a way to access the client's IP address through the Plumtree's framework?
I need to do this so we know the location of the user and in our business case we have fixed IP adresss which let us identify which location is user accessign the system from. We can't do this through preferences or profile because we have to use generic userid for the specifc group of users.
Any help on this would be appreciated.
Thanks.
Vanita

Hi, Vanita. For now, you can use
stringsClientIP = HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"].ToString();
Hope that helps!
Sarah

How do I boost the volume of a track, and a section within the track?

Thanks for any help.
I'm fairly new to logic and I'm trying to figure out how to boost the volume of a track. I know how to adjust it in the mix, but I have some imported audio files that still aren't loud enough overall. Is there a way to "boost" the volume of the track, so that it adds dB levels to the track overall? Not just turning the level of the track up, but actually boosting the volume of what's in the track? I turn it all the way up to 6.0, and it still isn't loud enough... I'd rather not have to double the track.
Also, is there a way to boost the volume of certain sections of the track, besides using automation?
Any help is greatly appreciated!!
Chris

First, welcome to the Apple Discussion Forums!
Try this. Double click on the track and the Sample Editor will come up. Select the section you want to boost and select Functions -> Change Gain. But keep in mind, boosting the signal will also boost the noise.
Hope this helps.

HOW DO I BOOST THE SIGNAL ON WRT54GV8?

I just read that the antennae are not removeable on the WRT54GV8. If this is the case, how do I go about boosting the signal on this wireless router?

I read the same thing about the ver8 router and dont know for sure if its true, if it is I would think about returning it for a router that you could add a better antenna to.

How best to boost the audio in a Flash file?

I haev a Flash file where the audio is low volume. I would
like to boost the volume level in the file.
1. Is there an editor that would allow me to do this? The
only guidance I have found so far from Adobe is to create a new
file and adjust the scripting characteristics, which I'd prefer not
to do.
2. I have several good sound editors. Would one option be to
export the sound track, improve its volume, and then import the
improved sound track back into Flash?
3. Is it better to export the Flash file to some other format
in order to get better audio editing capability?
Thank you,
Joyce

I'd opt for 2: fix up the audio track in an external sound
editor and then reimport it into Flash.

How can I boost the audio for a quiet clip?

I am using a video that someone else shot, and the audio is very low. They did not use a microphone, just the one on the camera, so the lady talking is very quiet.
I pulled the yellow audio bar up all the way, but it is still too quiet. Which audio effects can help me boost the volume more?
I've attached a screen shot of the audio effects I have available to me. I'm not quite sure what some of these effects actually do...
Please let me know if any of the effects I have would help me...or, should I just copy & paste my audio track several times? (I just thought of that...)
Thank you!

This article covers several ways to attenuate/adjust Volume of an Audio Clip: http://forums.adobe.com/message/3472343#3472343
Good luck,
Hunt

How can I boost the volume so I can hear a movie on a plane

I cannot hear movies while I am on a plane using MacBook Pro or my ipad. I have tried using the apple ear buds and sony noise cancelling headset. Will a headphone amp help?

I actually bought an App in the Mac App Store called Boom (sorry, I don't name these things). It was well reviewed, and it really boosts the sound out of my MacBook Pro. I can actually watch a movie listening to it through the MBP speakers.
It doesn't use up much RAM, and it really works. And no, I don't get a kickback for recommending it, but I can tell you it's changed my viewing and listening experience with the MBP.
A headphone amp also works, but it's just more junk to carry.
http://itunes.apple.com/us/app/boom/id415312377?mt=12

How do I use the remote app on a dual band network?

There are 2 routers in my home. One is dual band (SSID: NETGEAR49-5G). This one is being used as a 5GHz access point while the other (SSID: NETGEAR49) is being used as a 2.4GHz extender. However I can't use the Remote app to control my iTunes library, regardless of which router I connect to. I can't even use a passcode to add my library because I just keep getting an error saying I entered the wrong code. Strangely everything's fine if I turn off the 2.4GHz router, but I don't want to have to keep doing that. Is there any way I can configure the two routers so I can use the Remote app and other network-based services??

Hi,
I can tell you how it works on my iPhone.
I click the Messages icon to open it.
I click the box with pencil icon top right for New Message
I start to type the name of the person I want to contact in the "To" spot.
(Alternatively use the Blue + icon and select direct from Contacts list)
I select the full name of Contact from any list if there are multiples.
Once the person and their Contact option is selected I click on the text field at the bottom of screen
Using the "keyboard" I type the Message and then the Send button.
9:45 PM Saturday; June 9, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to wait until the 1st part of the processing is done

Hi,
I had a hard time to combine two parts of processing in one .vi file, and thus would like to get some advice/help through the forum.
Attached is the partial finished vi file I made. You can see that it is composed of two parts. The upper part is to run a bat file (check_result.bat), which generates a result.txt file. The lower part is to use the result.txt file as an input file, and check if the key word called "test case passed" is included in the result.txt file or not. So I want to run the upper part firstly, and then run the lower part after the upper part is finished.
However, I don't know how to connect the two parts in a right way that the lower part only starts running after the upper part is finished. Any comments/help is highly appreciated.
Thank you in advance.
Xuedong
Attachments:
question.vi ‏49 KB

The magic of dataflow!
All you need is a data dependency between the two parts. Often critical parts of each section contain error terminals, so you can just string em along in the proper order and each part must wait until the previous node has finished.
In your particular case, the read operation has no error input, so you can recruit any other input. Create a fake data dependency by strategically placing a small sequence frame containing common code. The sequence cannot start until all code that provides imputs has finished, serving your purpose.
Of course it seems silly to even try to read the file if the previous node failed. Right? So simply place the second part inside a case and hook it up to the error output. Now the second part (1) waits until the first part has finished AND (2) execute only of the first part succeeded. No sequence needed.
All clear?
Message Edited by altenbach on 02-07-2007 02:34 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
dataflow.gif ‏4 KB
dataflow2.gif ‏4 KB

How do i boost the strength of the signal to reach the remote parts of my house?

Similar Messages

Maybe you are looking for