How do I boost the volume of a track, and a section within the track?

Thanks for any help.
I'm fairly new to logic and I'm trying to figure out how to boost the volume of a track. I know how to adjust it in the mix, but I have some imported audio files that still aren't loud enough overall. Is there a way to "boost" the volume of the track, so that it adds dB levels to the track overall? Not just turning the level of the track up, but actually boosting the volume of what's in the track? I turn it all the way up to 6.0, and it still isn't loud enough... I'd rather not have to double the track.
Also, is there a way to boost the volume of certain sections of the track, besides using automation?
Any help is greatly appreciated!!
Chris

First, welcome to the Apple Discussion Forums!
Try this. Double click on the track and the Sample Editor will come up. Select the section you want to boost and select Functions -> Change Gain. But keep in mind, boosting the signal will also boost the noise.
Hope this helps.

Similar Messages

HT3919 In the past was able to adjust the memory for each individual application, my Illustrator CS5 appears is doesn't have enough memory to complete a particular project. How do I boost the amount of memory that Illustrator uses so I can complete my pro

In the past I have always been able to adjust the memory of each individual application,
my Adobe Illustrator CS5 appears that is doesn't have enough memory to complete a particular project.
How do I boost the amount of memory that Illustrator uses so I can complete my project?

With OS X, it automatically allocates RAM and it can't be allocated manually.
What model Mac do you have and what OS X version is it running. Your profile shows a PowerMac and OS 10.6.8. A PowerMac can't run OS 10.6.8. It's max OS is 10.5.x
How much RAM is installed in your Mac? You need to max out the RAM and close other open apps if you are having problems with Illustrator.
 Cheers, Tom

How do i boost the strength of the signal to reach the remote parts of my house?

how can i boost the strenght of my wifi signal to reach the remote parts of my house?

Thanks for the info.
The AirPort Express would be a good choice to "extend" the wireless signal.
The best way to do this is locate the Express in the middle of the remote area that needs more coverage and then connect an Ethernet cable from the Express back to the AirPort Extreme.
If you cannot run the wiring, the Express can be configured to extend the signal using wireless only, but things are always "iffy" in this type of setup. When you do it this way, the Express must be located where it can receive a good wireless signal to be able to extend it.
That would generally be a location about half way between your AirPort Extreme and the general area that needs more wireless signal coverage. The potential problem here is obstructions since each "normal" wall in a home will absorb anywhere from 15-25% of the signal. A ceiling, since it is thicker will absorb even more.
Unfortunately, it's really not possible to say with accuracy whether extending using wireless only will do the job that you want. You could try it that way....but it would be wise to keep Plan B in mind....in case Plan A does not work out.

How can I boost the volume so I can hear a movie on a plane

I cannot hear movies while I am on a plane using MacBook Pro or my ipad. I have tried using the apple ear buds and sony noise cancelling headset. Will a headphone amp help?

I actually bought an App in the Mac App Store called Boom (sorry, I don't name these things). It was well reviewed, and it really boosts the sound out of my MacBook Pro. I can actually watch a movie listening to it through the MBP speakers.
It doesn't use up much RAM, and it really works. And no, I don't get a kickback for recommending it, but I can tell you it's changed my viewing and listening experience with the MBP.
A headphone amp also works, but it's just more junk to carry.
http://itunes.apple.com/us/app/boom/id415312377?mt=12

How best to boost the audio in a Flash file?

I haev a Flash file where the audio is low volume. I would
like to boost the volume level in the file.
1. Is there an editor that would allow me to do this? The
only guidance I have found so far from Adobe is to create a new
file and adjust the scripting characteristics, which I'd prefer not
to do.
2. I have several good sound editors. Would one option be to
export the sound track, improve its volume, and then import the
improved sound track back into Flash?
3. Is it better to export the Flash file to some other format
in order to get better audio editing capability?
Thank you,
Joyce

I'd opt for 2: fix up the audio track in an external sound
editor and then reimport it into Flash.

How can I boost the audio for a quiet clip?

I am using a video that someone else shot, and the audio is very low. They did not use a microphone, just the one on the camera, so the lady talking is very quiet.
I pulled the yellow audio bar up all the way, but it is still too quiet. Which audio effects can help me boost the volume more?
I've attached a screen shot of the audio effects I have available to me. I'm not quite sure what some of these effects actually do...
Please let me know if any of the effects I have would help me...or, should I just copy & paste my audio track several times? (I just thought of that...)
Thank you!

This article covers several ways to attenuate/adjust Volume of an Audio Clip: http://forums.adobe.com/message/3472343#3472343
Good luck,
Hunt

HOW DO I BOOST THE SIGNAL ON WRT54GV8?

I just read that the antennae are not removeable on the WRT54GV8. If this is the case, how do I go about boosting the signal on this wireless router?

I read the same thing about the ver8 router and dont know for sure if its true, if it is I would think about returning it for a router that you could add a better antenna to.

How can I boost the range of my router?

I have fios for phone/tv/Internet and use the Verizon MI24-WR router which works fine but my bedroom on the other side of the house doesn't get a signal. Any recommendation on improving the signal? I have the router in the office connected to the printer, PC and a"cable box" so moving the router would be a pain.
I have an old Linksys WRT54G that I could use as a booster but have no idea how to do that.
Does Verizon update router firmware? Replace older routers?

Firmware updates should happen automatically - login to your router and from here http:\\192.168.1.1
- advanbced - firmware upgrade to verify what version you have. From what I read routers are replaced based on issues you are having as well as your speed tier (75 Mb/s and up get the latest router)
I defer to the experts AFA extending the range of your WIFI please see http://forums.verizon.com/t5/Home-Networking/Actiontec-router-does-not-support-wireless-range-extend...
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

How can we boost the use of Webdynpro....?

One of the issue seems to be the User licensing cost.
Companies feel its cheaper to use a 3rd party web application to capture details and just use a RFC/ IDoc/ File to push transactions into SAP, thus using only 1 SAP communications user, instead of 500 webdynpro (web) users.
Probably, SAP should think about the license cost for "Webdynpro only" users.
Any thoughts?

>
Juwin Thomas wrote:
> One of the issue seems to be the User licensing cost.
>
> Companies feel its cheaper to use a 3rd party web application to capture details and just use a RFC/ IDoc/ File to push transactions into SAP, thus using only 1 SAP communications user, instead of 500 webdynpro (web) users.
>
> Probably, SAP should think about the license cost for "Webdynpro only" users.
>
> Any thoughts?
SAP does have such a user license, call the Platform User. Contact your account executive if you would like to discuss the details of such a user.
License agreements do vary from country to country and within individual accounts - but in general it is a violation of SAP license agreement to create a 3rd pary UI and call RFCs and Web Services and only use one user account for the service calls. All end users who interact with the application (even via service calls), need at least a plaftorm user license. However, due to the dynamic nature of license agreements, I would suggest that you discuss this in detail with account executive.

HOW DO I BOOST THE SIGNAL OF WAG300N?

HI.LAST WEEK I BOUGHT THE LINKSYS WAG300N FOR WIRELESS INTERNET ON DSL(ISDN).I AM VERY SATISFIED WITH THAT PRODUCT BUT I WOULD LIKE TO HAVE MORE SIGNAL ALSO ON THE NEXT FLOOR OF MY HOME.IS THERE A SOLUTION FOR MY PROBLEM WITH AN ANTENNA KIT OF LINKSYS OR IT IS BETTER WITH A RANGE EXPANDER?AND IF YES WHICH IS THE PRODUCT CODE TO ORDER IT?THANKS A LOT.

i think the range expander wre54g should be able to do the job for you ..

How to create a text field box that saves and reveals content within PDF?

I cannot seem to find a way (at least within Indesign) to allow users to enter content, and then to later have that content revealed within the PDF at a later point.
Example:
User enters name: "Jon"
PDF: "Welcome Jon!"

You can't do it with InDesign but you might be able to do it with some
scripting in Acrobat Pro. You might want to visit the Acrobat forum and
ask there.

I want to boost the volume on my iPad

How can I boost the volume on my iPad? When using Time Warner the volume is too low and already at the limit

http://www.bose.com/controller?url=/shop_online/digital_music_systems/bluetooth_ speakers/soundlink_wireless_speaker/index_new.jsp

How to boost the power on my Airport Card

As I posted before, I finally got my old iMAC to go with the Airport Extreme. The Airport Card in the iMAC is behind the trap door. I must be within 5 feet of the base station to get it to work. That's disappointing, I had hoped for at least 20 ft.
Anybody an idea how I can boost the power of this card? Antennae maybe? My other Macs are far away and work flawlessly.
Thanks, Jan.

Anybody an idea how I can boost the power of this card?
Check out the Whip AirPort Antennas from MacWireless.

Any way to boost the Bluetooth receiver on a MBP?

How can I boost the Bluetooth receiver on a MBP? In my current setup, I have my MBP to the left while I have an external monitor in the middle that acts as my primary monitor. So, since my Bluetooth mouse is on my right, the distance is about 1.5 feet from my MBP and therefore the Bluetooth signal is weaker, so the mouse sometimes lags across the screen when moving it around.

If this is physical media rather than a VTL, then you can always write protect or even export the volume, so it won't be written to, if you don't want it.
The write window will be correctly applied when the tape has expired and is written to again. You can't edit the write window on the tape, you can only increase the amount of time the tape is kept with the retain options.
Thanks
Rich

Help to boost the performance of my proxy server

Out of my personal interest, I am developing a proxy server in java for enterprises.
I've made the design as such the user's request would be given to the server through the proxy software and the response would hit the user's browsers through the proxy server.
User - > Proxy software - > Server
Server -> Proxy software -> User
I've designed the software in java and it is working
fine with HTTP and HTTPS requests.The problem which i am so scared is,
for each user request i am creating a thread to serve. So concurrently if 10000 users access the proxy server in same time,
I fear my proxy server would be bloated by consuming all the resources in the machine where the proxy software is installed.This is because,i'm using threads for serving the request and response.
Is there any alternative solution for this in java?
Somebody insisted me to use Java NIO.I'm confused.I need a solution
for making my proxy server out of performance issue.I want my
proxy server would be the first proxy server which is entirely
written in java and having a good performace which suits well for
even large organisations(Like sun java web proxy server which has been written in C).
How could i boost the performace?.I want the users should have no expereience of accessing the remote server through proxy.It would be like accessing the web server without a proxy for them.There should be not performance lagging.As fast as 'C Language'.I need to do this in java.Please help.

I think having a thread per request is fine.Maybe I got it wrong, but I thought the point in
using NIO with sockets was to get rid of the 1 thread
per request combo?Correct. A server which has one thread per client doesn't scale well.
Kaj

How do I boost the volume of a track, and a section within the track?

Similar Messages

Maybe you are looking for