How do I boot from Windows disk?

Recently, I have gotten the STOP Error c00021a Fatal System Error. I have tried all the built in resources, which have all failed. I want to boot from my Windows CD under bootcamp, but the "Press any key to boot from CD..." message never appears. How do I boot from the CD? I can't get to the login, and when I get to the command prompt under repair your computer, select the disk drive, and run setup.exe, there is no "Repair your computer" option available, only "Install" and "What to know before installing". Is it possible? Some one said to use a USB keyboard, but I don't have one.

Hold option when computer starts up.
Are you selecting the windows hard disk or cd? Make sure you choose the cd as the repair option is not avaliable on the hard disk (pre-copied installer)

Similar Messages

MacBook Pro 2010 hangs when booting from Windows install disk

Hi there,
I'm trying to install Windows 7 via Bootcamp. I've used Bootcamp before so familiar I'm with how it should work. I have a USB CD drive, which I've used on other machines OK, and an official Windows Install Disk.
After Bootcamp finishes copying over all it's drivers etc to my external USB drive, it reboots. However, whenever I try to boot from a disk it always just hangs on the Apple logo (no spinning cog/wheel). This happens whenever the Bootcamp installer performs a reboot and/or when I hold down ALT on startup and select the boot CD.
I can still boot in to mac partition. Could this be a problem with the EFI? Any help with identifying this problem or how get the information to fix this problem would be much appreciated
Thanks.

Try resetting PRAM…
http://docs.info.apple.com/article.html?artnum=2238

Can't boot from hard disk or from windows 7 recovery dvd

I have a 970A-G46 motherboard.
I can't boot from hard disk or from a windows 7 recovery dvd.
If I move the hard drive to another PC, it boots fine.
If I put the DVD in another PC's dvd drive, it can be accessed.
This machine will boot from an Ubuntu dvd and I can then access the HD directories and the recovery dvd.
What do I need to do?
Help and thanks

"I can't boot from hard disk or from a windows 7 recovery dvd."
What is that DVD from? Is it from a previous computer of some kind? Same question for HDD and the OS on it.

I have heat issues into MacBook pro after installing windows 8. when boot from windows ha've overheating. how can I fix it??

Have heat issues into MacBook pro when boot from windows partition how can I fix it??

panarpan wrote:
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over.

How to boot from rescue disk

Hi,
I am running Macbook Pro, snow leopard 10.6.8
My resuce disk is based on 10.6.4
I tried to boot from rescue disk to repair the main disk.
I failed to boot from the rescue disk as my rescue disk (from CD) is not being recognized. I tried multiple options such as holding down "C", "c", "option" key etc while the system is restarting. Only the main disk was being shown as the bootable option (while holding down the option key when restarting) but not the rescue disk.
I verified that my rescue disk is good. Infact, I could boot a Lion MacBookPro using my resue disk.
Any inputs are appreciated.
Thanks
gb

It was 10.6.4 (Snow Leopard). It was the same as the rescue disk version.
thanks
gb

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

Is Apple compatible with Microsoft Office?
Any computer is compatible as long as it can read and write Office files. But for perfect (or at least near perfect) compatibility, you would want to purchase Office 2011 for Mac.
How can I transport from Windows to Mac?
You can't directly transport any installation of Windows. All PC's come with a machine specific version of Windows intended for that PC. They don't have all of the hardware drivers the retail disks cover.
If you want Windows on your Mac, you would first purchase a full version copy (NOT an upgrade disk) of Windows 7 or 8. Those are the only supported versions on newer Macs. You install it through the supplied Boot Camp utility that comes with the Mac to create a new partition for Windows, and then install the retail copy of Windows you purchased.
The reason only these versions of Windows are supported is the same basic reason as a machine specific version of Windows for a PC. Apple only includes the necessary Mac hardware drivers for Win 7 or 8 on new Macs.
Once Windows is installed, you could then install the version of Office for Windows you already own. The nuisance of a Boot Camp partition is that you have to physically boot to either Windows or OS X, so you can only use the apps of the OS you're in at the time. To use both at once, you'd have to use virtual machine software (Parallels, VMware, VirtualBox) and then install Windows within that. Then you'd be able to run Windows inside of OS X and have access to both at the same time.

How can i transfer from windows to mac with my catalogue ?

hello, how is the best way to transfer my catalogue from windows (8.1) to mac (yosemite) ?
thx for your help.
best regards from germany
oliver

Is Apple compatible with Microsoft Office?
Any computer is compatible as long as it can read and write Office files. But for perfect (or at least near perfect) compatibility, you would want to purchase Office 2011 for Mac.
How can I transport from Windows to Mac?
You can't directly transport any installation of Windows. All PC's come with a machine specific version of Windows intended for that PC. They don't have all of the hardware drivers the retail disks cover.
If you want Windows on your Mac, you would first purchase a full version copy (NOT an upgrade disk) of Windows 7 or 8. Those are the only supported versions on newer Macs. You install it through the supplied Boot Camp utility that comes with the Mac to create a new partition for Windows, and then install the retail copy of Windows you purchased.
The reason only these versions of Windows are supported is the same basic reason as a machine specific version of Windows for a PC. Apple only includes the necessary Mac hardware drivers for Win 7 or 8 on new Macs.
Once Windows is installed, you could then install the version of Office for Windows you already own. The nuisance of a Boot Camp partition is that you have to physically boot to either Windows or OS X, so you can only use the apps of the OS you're in at the time. To use both at once, you'd have to use virtual machine software (Parallels, VMware, VirtualBox) and then install Windows within that. Then you'd be able to run Windows inside of OS X and have access to both at the same time.

I purchased an hp external cd drive, how can i boot from it? setup does not show it being connected

When i connect the external drive it is being connect to a usb port. When i go into the setup of the laptop it does not show an external drive being connected to the usb port. My cd drive that came with the laptop does work, i tried it in my laptop, but on my daughters machine the cd drive is not being shown on the computer or in Device manager. I upgrade out laptops from windows vista 32 to windows 7. The drive was working and one day my daughter went to go burn a cd and thats when we found out it is not showing on the computer. Her p/n is FE653UA#ABA - dv6910US. I tried everything to get the drive to show up on the computer but had no luck, that is why i purchased an external drive. The drive i purchased is an HP 8x external dlim muliformat dvd/cd writer.
I now need to figure out how I can boot from this external drive, can anyone help me?

Hi,
Have you read the Windows7 Upgrade Guide for dv6000/dv9000 models so generously written and provided to the community by Expert member Daniel_Potyrala?
Have you checked in the Device Manager to asee if all devices have drivers loaded?
Have you tried the Microsoft Fixit for DVD/CD drives?
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How do I boot from an external drive?

I've just Carbon Cloned my 60GB drive to a firewire external drive. I'm about to replace the 60GB with a 160GB drive and the CCC instructions say boot from the external drive I'd just created once the new disk is installed. Then CCC the cloned drive back to the new hard drive.
So, how do I boot from an external drive? Do I have load anything to the new drive? Will the macbook detect the external drive and boot from that? Or what??????
Thanks
Dick

Thanks DWB. Being the rash impetuous guy I am I didn't wait for replies and just switched on the macbook after installing the new disk (which was so easy it was unbelievable - had to go and buy a a little torx bit though) to see what would happen.
Blow me down with a feather if it didn't just boot off the external drive all by itself :-O It did come up with the disk was unverified and I could see it in FINDER and I was prseented with a screen to ERASE/RESTORE etc.
When I went to CCC the external drive back to the new hard drive it didn't give show me the new hard drive so I guessed I'd have to do something to format (?) the hard drive.
I don't know if I did the right thing but I went to disk utilities and chose ERASE in the vague hope it would maybe format the disk in some way.
Seems to work now and the CCC replaced the system perfectly as far as I can see.
Basically very impressive all round. Piece of proverbial to replace the disk and CCC made life so easy.
Thanks again.
Cheers
Dick

How do I boot from an alternate hard drive?

How do I boot from an alternate hard drive?

Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select the desired disk icon from which you want to boot.
5. Click on the arrow button below the icon.

How to transfer video from hard disk to i tune?

how to transfer video from hard disk to i tune? can any one please?? help me also in guiding if anything else is required to be done to transfer the content to ipad....

Drag it into the open iTunes application window. You may need to use a product such as MPEG Streamclip to convert it to MPEG-4 first.
(59829)

How do I switch from Windows to mac?

How do I switch from Windows to mac on a macmini?

Hi,
I assume you are talking about a BootCamp Windows, right ?
If so, usually you hold down the Alt/Option-key at startup of your Mac to get the Boot Selection screen.
There you can choose which Operating System to boot into.
Once in OSX you might wanna go to System Preferences - Startup Volume and set your OSX to be the default.
Regards
Stefan

New MacBook won't boot from external disk

I have a new MacBook that I am trying to boot from an external disk that had the system from my first gen MacBook Pro. When I restart holding the Option key, and select my external disk, the system restarts again and won't let me boot from that disk. Is there something different with the OS (10.5.6) that is installed on a newer MacBook that won't allow it to boot from the same OS from an older MacBook Pro?
Thanks

Ian Patterson wrote:
golferx,
Will any other Intel Mac boot from the drive? If not, it's possibly because the drive uses an Apple Partition Map (bootable for PowerPC Macs) instead of a GUID Partition Table (bootable for Intel Macs).
To check: open to Disk Utility, select the hard drive on the left, select the Partition tab and look at the text at the bottom right corner of the window under Partition Map Scheme. If it says anything other than GUID Partition Table, you will need to erase and repartition it as such before it will be bootable.
Just a thought. Hope this helps. Good luck!
-i-
I can boot an prev gen MacBook and also my iMac (current gen). I took it to the Genius Bar and he could not get it to boot a new MacBook either and didn't have a solution.

Boot from USB disk fails

goal:
I would like to boot from a USB pendrive
specs:
MSI K8N neo platinum (bios 1.4/1.56)
Transcend jetflash 256MB
problem:
The system does not boot from the disk
what i tried:
i made the usb stick bootable in 2 differend ways:
- i used the included software to make it bootable
- i used mkbt.exe to make a bootrecord
i updated the bios from 1.4 to 1.56
i did try to boot with the F11 option
i did set the primary boot order to USB-ZIP and i also tryed USB-FDD and USB-HDD
i also enabled the USB storage device in the bios
i tried to get the USB stick as a disk drive while booting from a disk, which also failed
is there anyone who have a idea how-to make it bootable?
i'm kinda out of idea's

what more specs do you want?
specs:
MSI K8N neo platinum (bios 1.4/1.56)
Transcend jetflash 256MB
AMD 64 3200+
Zalman cooler
2 512 Kingston memory
2 Maxtor HD
2 CD/DVD drives
ATI 9600 VGA card
i would like to boot from a pendrive for various reasons, but mostly because i would like to boot in Dos or Linux.

Satellite A200 - Cannot boot from Recovery disk - code 1

I have Vista business and my laptop is currently running slow and is full of rubbish.
I have in the past used my recovery disc to completely re-install vista and start from a fresh version.
However, i have tried this time and it says that it cannot boot from cd - code 1.
Can someone tell me what this is and how to re-install vista?

Hmm... so its definitely not a ODD issue but there is something wrong with the shipped CDs. From my knowledge this error would appear if the CD would NOT be bootable!
Its strange for me that this notebook has been preinstalled with the Vista business.
Usually the notebooks are preinstalled with Vista Home Premium and usually you have to create the own Recovery disk using the preinstalled tool called Toshiba recovery Disk Creator.
Anyway, if you are not able to boot from these disks then you would need other disks.
You could order it from the ASP in your country or from this page:
https://backupmedia.toshiba.eu/landing.aspx
Cheers

How do I boot from Windows disk?

Similar Messages

Maybe you are looking for