How do I boot into recovery mode with wireless keyboard

I am unable to boot into recovery mode using either cmd-R or holding down the alt key. How is it supposed to work?
Message was edited by: Niklas Brunberg (better title)

I understand your concerns - I'm glad both of my machines are dual bootable (just in case) and I have my Snow Leopard install disks..... However, this is what Apple has decided, so we need to find the best way to deal with it. Personally, I've tested the recovery mode several times and, at least on my machine, it was not reliable (i.e. it wouldn't work - I tried it again and it did, but it spent more than an hour downloading the entire 4 GB installer again and then another 30 minutes installing it), and on a third try, I found that it had vanished because I had cloned by drive. When you clone, only your system is cloned, not the extra partition.
So, I've decided to rely on a) my bootable clones and b) a copy of the installer (.dmg) in case my clones fail. I don't feel comfortable relying on something that requires an internet connection and a full download to work. But, that works for me; you may want to take a different approach.

Similar Messages

Mountain Lion only boots into Recovery mode after using iCould lock

Hi everyone!
I have searched the forums for hours now, but I can't seen to find an answer to my question, so I'd like to ask it.
Recently my system partition failed due to frequent kernel panics caused by a cable in the screen I think. The kernel panics still occur, but I don't know what to do with them.
I managed to save my files and reinstall my osx, which is Snow Leopard (the disc came with the computer). Then I wanted to install my purchased copy of Lion through Appstore, but it said it's no longer available in my country and I couldn't download it again.
Then I decided to buy a copy of Mountain Lion which I tried to install. I managed to do it, and I tried to explore my new operation system.
I tried the iCloud app as well, including the Lock. It locked the computer, and rebooted, but ever since I couldn't unlock it.
When it asks for the password I enter it and it accepts it, but doesn't unlock, only lets me into Recovery mode. Now I reinstalled the whole thing over again and when the Mountain Lion install finishes, it only boots into the Recovery HD without asking.
So if I reboot my computer, no matter what I do it only boots into Recovery Mode.
Please help!!
Mike

I was afraid the Apple Store wasn't going to be an option.
Based on your previous post, I was under the impression you could download Mountain Lion, but when you installed it, it locked up again. Not true?
I don't know how to remove it. You can try contacting Apple support through the link below to see if they can help you get this unlocked.
Apple Support Contact
Are the kernal panics new since all this happened?
Here is some information about kernal panics.
Kernel Panics - About
Kernel Panics - Avoiding and Eliminating
Kernel Panics FAQ
Kernel Panics FAQ (2)
Kernel Panics - Understanding and Debugging
The articles discuss where kernal panic reports are filed. After you have a kernal panic, copy the report and post it here. Please copy and paste rather than using a screen shot. There are several people who can read them and they can suggest what to do next. Reading kernal panic reports isn't something I've totally figured out yet.

HT201263 i need to get my iphone into recovery mode with a broken home button and is disabled, my exgirlfriend has the laptop i synced it with, what should i do??

i need to get my iphone into recovery mode with a broken home button and is disabled, my exgirlfriend has the laptop i synced it with, what should i do??

i have the same probelm did u get it solved if yess how ?

Cannot boot into Safe Mode with Networking - Windows 8.1 Update

I'm trying to boot into safe mode with networking. I can successfully boot into Safe Mode, but my Network Access is always disabled.
I've tried msconfig / Click on Restart / Restart Now from the Update and Recovery menu in 'Change PC Settings'. They all eventually get me to the Same boot options menu which says ... F4 for Safe mode, F5 for Safe mode with Networking etc.. I
select the F5 Safe mode with Networking and it re-boots into Safe mode but I have no network access.
I'm connecting to my home ADSL, no proxy required. If I boot normally I have network & internet access, but in 'F5 Safe mode with Networking' my networking is disabled.
Windows 8.1 Pro x64

I can see that I am actually connected to my router, but the network icon still shows as disconnected.
What about the Network list via the Settings charm (Win-I)? Last week I was having problems with that one after long sleeps. Later I realized that although I could see the icon in the Settings charm (as normal) when I clicked on it, it still
showed the same icon as I was expecting; the difference is that it didn't show "Connected"; so, clicking on the icon proved that it was offering a Connect button and clicking that finally got me connected. Meanwhile the troubleshooters were misleading
at best and destructive at worst, suggesting I power things off, etc. I don't know if there was a fix for this specific symptom or whether I just tried a different path but yesterday instead of trying the above procedure I tried to see what the Network
troubleshooter associated with IE's "unable to connect" page would do; amazingly it identified the problem precisely. That connection had somehow acquired a connect manually attribute. The troubleshooter offered to fix that problem for me
and I accepted. Since then, no more problem.
FYI
Robert Aldwinckle

MacBook Pro OSX 10.9- Cannot boot into recovery mode or use USB bootdisk

Hi guys,
I'm having an issue with my MacBook Pro running OSX 10.9. I want to re-install the operating system, however the computer freezes when being booted into recovery mode or when rebooting into a USB boot disk. Either the spinner freezes or it moves to a screen with just the Apple logo.
Thanks in advance

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

My MacBook won't boot into recovery mode after new hard drive installation. Please help!

I just installed a new hard drive. On boot it keeps on going to the flashing folder with a question mark inside.
I was able to format the new hard drive but am unable to boot into recovery mode to install the operating system over the air.
When I hold down Command -R it keeps on taking me to the flashing folder.
Please help!

A new hard drive doesn't have a recovery partition. It's totally blank.You're going to need either your original install discs or a Snow Leopard retail disc from which partition, format and install OS X.

Booting into 64bit mode with Mac Pro 2009

I am trying to boot into 64bit mode with a 2009 Mac Pro 2.93 Quad core machine. I tried holding down 6 and 4 when restarting but no luck, it staill says no in the profiler. Any ideas why?

If you'd like your Mac to always start up in 64 bit mode without having to hold down any keys, do this:
Here's the configuration file approach for always booting into 64-bit. This is the best way to make your Mac always start up 64 bit as the only thing necessary is to alter one line of a configuration file. You can do that by opening the Terminal and entering:
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.Boot 'Kernel Flags' 'arch=x86_64'
To return to 32 bit mode, you would repeat the command but enter an empty string, which would just be the single quotes (where arch=x86_64 is) with nothing in between.
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.Boot 'Kernel Flags' ''
These commands are all one line, they're just wrapping here.
If at any point you find you need to start up in 32 bit mode for a single use, just as you held down the 6 and 4 keys for 64 bit, you can hold down the 3 and 2 keys for a temporary change. No need to keep changing the config file over and over.

Mac keeps booting into Recovery mode

HI,
my macbook pro mid 2009 keeps booting into recovery mode,
if I select primary disk in recovery mode or at boot holding shift it quickly showes crossed out circle instead of an apple at boot screen than boots into recovery mode again.
I have repair permessions, repaired disk (no errors) and reset pram but no luck.
Is there anything alse I can try?
Thank you.

Looks like some files might be damaged. You will likely have to reinstall the operating system. I hope you have a back up of your data.

OS X Lion 10.8.2 won't boot into recovery mode

Help! OS X Lion 10.8.2 won't boot into recovery mode, I get a grey screen, the apple icon and the spinning symbol...Does anyone have any suggestions?
Have a MacBook Pro (2009) and had no problems until upgrading to LIon from Snow Leopard... thanks!

Hi there - thanks very much for your suggestion, it did reboot eventually but took a long time to get there.
I've have run Disk Utility. After Verifying the disk it said it needed Repairing - so tried doing that and got the message " Error: Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files" I have got Time Machine but haven't backed-up since Dec 12...Can I use "Restore" to copy the MBP HD to an external HD and then re-install Lion?

Booting into recovery mode and Web service in 10.7 server

I have two servers: Server A is running 10.6 server and server B is running 10.7 server. Both are on the same LAN at a data center. My questions are as follows:
1 - is there a way to restart server B into recovery mode remotely? (and not using a KVM)
2 - if server B was booted successfully into recovery mode is there a way to screen share with it from server A? If so how would this be done?
3 - can Apple Remote Desktop reboot a 10.7 machine into recovery mode and still continue to see its screen?
4 - in the Server app of 10.7 server there is a default website setup in the Web service. it doesn't seem possible to edit any of the information for this default website, is this true?
5 - is there any way to get the Web service in the 10.7 Server Admin tools? it is missing among many other services.
Thanks

Probability is very high that you have a hardware failure. You should get an external bootable drive (or startup with a bootable DVD if you can) JUST to prove that it's not the motherboard, but probably the hard drive that's failed.

Unable to boot into safe mode with FileVault 2 enabled

I was trying to boot into safe mode earlier to try and fix a few things. It looks like I can't and I suspect it is because of FV2.
When the system starts I press shift after the tone, but then I have to release shift and enter the password and then Lion will only boot into normal mode.
I've also tried with sudo nvram boot-args="-x" from the terminal, but while it seesm that this way Lion starts to boot into safe mode, after a while it just restarts as if something crashed etc and then again, I have to enter the password for FV and all again as in a loop, i.e. Lion won't even start this way.
So I went into the recovery mode and I could make Lion start again at least in normale mode with sudo nvram boot-args="".
Any idea of what could be preventing Lion from entering safe mode?
Thanks in advance

The symptom may be unrelated to FileVault 2. I encountered the symptom with FileVault 2 disabled and with backward conversion (decryption) complete.
Apple reference for my bug report: 152162960. If the symptoms on your Mac compare to those on mine: progress may seem to cease during safe fsck.
Vito, as you are comfortable with the nvram command, please try the following:
sudo nvram boot-args="-v -x"
Restart the computer and note the last verbose lines that appear before you sense that progress has ceased. Then please add a note of those lines to this topic.
Additional questions
What model is your Mac?
What type of disk for the startup volume?
How many files on that volume?
Approximately how large are the attributes file and catalog file? (You might gain this information with a demo version of iDefrag.)
My current envronment
MacBookPro5,2
8 GB memory
startup from internal 320 GB rotational disk, Serial-ATA, Hitachi HTS723232L9SA62 (probably Travelstar 7K320)
3,961,791 files
495,744 folders /* not including the root folder */
catalog file 3.0 GB, not fragmented
attributes file 2.2 GB, not fragmented.
At http://www.wuala.com/grahamperrin/public/2012/01/09/a/?mode=gallery file speedy.txt includes details of the volume.

I thought that I was updating my phone...but it went into Recovery mode with the USB cord pointing to itunes and music notes in a circle. How can I get my Iphone 4 back to working without losing my data? I tried turning the phone off and it is uplugged.

My iphone 4 is stuck on the lock screen with the USB cord pointing to itunes and music notes. I thought I was updating the phone for itunes but it is now teetering on the Recovery Mode. I do not want to lose my data, etc. Can someone explain how I can get my phone back? Apple support is not helpful.

Your phone is in recovery mode. All data on it are already lost. You must connect your phone to your computer and restore through iTunes.

Cannot boot into Recovery Mode but need to reinstall OS X, any suggestions?

My Mac boot is stuck at the Apple logo with a progress bar, and even when booting Recovery Mode (Command+R) it is stuck. Hence I don't think I can use Internet Recovery to reinstall OS X. Do you guys have any suggestions as to what to do? Thanks!

FYI:
I have tried booting into Single User Mode, using fsck to repair permissions, but to no avail. However in the Single User Mode I did notice something unusual. When trying to reboot using the command 'exit', a long list of errors came out.
Most were Library/Extensions/... .kext is not authentic; omitting from prelinked kernel.
Some errors were ...: No such file or directory
And afterwards the errors were stuck there and no reboot occurred. I also couldn't type anything.

Macbook only boots into recovery mode

Any help on this issue would be greatly appreciated. The other day I was watching a movie on Quicktime and out of nowhere the computer froze up. I waited a minute and then finally just did a force shut down of the computer. I then started it back up but instead of coming to the login screen, it started up in recovery mode, where I get the OS X Utilities window.
I opened disk utility where instead of the normal Macintosh HD listed on the sidebar, it says "disk0s2". I tried repairing the disk and it came up with an error saying it couldn't be repaired and I have to reformat the disk. I took it in to the genius bar and they ran a battery of tests on the hardware and it all came back fine, so he told me it must be a software corruption issue.
Now I could just reformat the disk, but being the idiot that I am, I haven't done a Time Machine backup in several months, so there's files I would really like to recover before going through with the reformat. The guy at the genius bar seemed to think it wasn't recoverable, even by a data recovery company, but he said there's always a chance. Is there a chance? And is there anything else I can try to do at home? I've heard good things about Disk Warrior, but how would I run it if I can't even get to my desktop? From another computer?
I have a 2013 Macbook Pro, retina display, 256GB SSD, 8GB memory, running Mavericks.

I was afraid the Apple Store wasn't going to be an option.
Based on your previous post, I was under the impression you could download Mountain Lion, but when you installed it, it locked up again. Not true?
I don't know how to remove it. You can try contacting Apple support through the link below to see if they can help you get this unlocked.
Apple Support Contact
Are the kernal panics new since all this happened?
Here is some information about kernal panics.
Kernel Panics - About
Kernel Panics - Avoiding and Eliminating
Kernel Panics FAQ
Kernel Panics FAQ (2)
Kernel Panics - Understanding and Debugging
The articles discuss where kernal panic reports are filed. After you have a kernal panic, copy the report and post it here. Please copy and paste rather than using a screen shot. There are several people who can read them and they can suggest what to do next. Reading kernal panic reports isn't something I've totally figured out yet.

2011s MacBook Pro won't install Yosemite neither reboot or boot into recovery mode.

Hello everyone, I've searched all around the web and didn't find a solution.
Sorry about my english, btw, I'm from Brasil lol!
I have a 2011s MacBook Pro, used to run Snow Leopard until 2 days ago, when I downloaded Yosemite and restarted the computer to run the installation.
During the process, it stopped at 22%, and said: FILE SYSTEM VERIFY OR REPAIR FAILED.
I tried to reboot on Macintosh HD as usual, but it's not possible, I can't unmount the HD to repair it, can't erase it and I'm a little desperate.
I have a good backup of important files on an external drive, so the best solution for me would be to format the HD again, with the Yosemite image which appears to be running at startup.
Command+ anything at startup doesn't work, probably because the Yosemite install is trying to run...
Any suggestions???
Thank you!

Hey Vince,
I have the same or similar issue. Please forgive my English, as I attended American Public schools
So last night, my MacBook Pro told me hey you want to download this free and amazing new OS called Yosemite?
(I'm adding to your post to hopefully grab more attention and then maybe grab a solution from someone out there..)
I thought yea, no, maybe, okay it's free, they say it is amazing-- why not?!?
So I downloaded and clicked okay to restart and install the new OS.......but it won't install the OS and I get stuck here on this screen.
I have tried restarting about 10 ties. I have tried quitting the install but it won't allow me to boot from Mac HD or my time capsule HD. I tried going into the menu options above but it won't let me repair or reboot or anything to get my MacBook to work again.
It is pretty frustrating. I went from having a working MacBook Pro to having a nightlight.
Vince- if you get a solution or a fix, Please let me know.
Thanks
john

How do I boot into recovery mode with wireless keyboard

Similar Messages

Maybe you are looking for