How do I boot up my windows 7 installation?!

Hello,
My 15-g092sa came with the atrocious win 8.1. I need to get some work done so I am trying to install my Windows 7 64 Pro. That DVD has been used for several times everytime I had replaced hardware. It boots up fine on other hardware.
However, it will not boot on this machine. I found the BIOS settings and put the hard drive (windows boot manager) in the bottom. Everything else is on top of it and should boot before it. The DVD won't boot, a USB bootable ISO won't work...
When trying to install from a running win8.1, the setup won't let me manage my partitions, a crucial reason for me to want to handle the installation myself.
How do I boot things other than the bloatware that came with this PC?
This question was solved.
View Solution.

Hi:
In order to boot from a DVD and to install and run Windows 7, you need to change 2 BIOS settings.
See the info at the link below for what settings need to be changed.
http://support.hp.com/us-en/document/c03736054
You must leave these settings changed because Windows 7 is not compatible with secure boot, and visa versa.

Similar Messages

HOW TO DUAL BOOT W540 with windows 8.1 / 7

I got my W540 recently with windows 8.1 pro on it. but as all engineers worst nightmare windows 8 has hard time with engineering softwares (for my case TIA Portal for PLC programming software which only support windows 7). so i need to have a windows 7. i prefer to keep my windows 8 and have dual boot system with windows 7 added. But i can't install windows 7. initially due to disk type (GPT), then i changed it to MBR without losing my files (which only was possible if i had deleted the recovery partition- now my recovery is on my flash drive). But there are already 4 partitions on the system (1 for C: drive and 3 for recovery and system files which came originally with the product) , how can i install a windows 7? i can't add another partition because that makes my disk a Dynamic disk (which i don't really know what is). all in all, i really need windows 7 on my system ASAP. If anyone know how to fix this please reply. Thanks guys.
Solved!
Go to Solution.

You are limited to four PRIMARY partitions on an MBR disk.
But other than the "active" partition (i.e. the small 100MB "system reserved" partition where Boot Manager is placed from doing a cold Windows install on an empty drive, or the 1.4GB equivalent Boot Manager partition that Lenovo provides along with other tools and utilities), all other partitions on the drive can be "logical". They are not required to be PRIMARY, although Lenovo delivers its partitions that way. But you can change that.
You can have up to 120 LOGICAL partitions on a drive (all of which live inside an originally PRIMARY partition which gets converted to an "extended partition" which houses all of the logical partitions. So if you have at least one logical partition (and thus have to give up one primary partition in order to build that required "extended partitions"), that means you can have up to three remaining primary partitions and up to 120 logical partitions... all on an MBR disk. No "dynamic", and no GPT.
Yes, that means even the Windows system partition itself (i.e. "C") can be on a LOGICAL partition. It's only that one "active" partition (where the BIOS goes to find Boot Manager and its menu, and kick off the rest of the system boot process) which truly must be PRIMARY. That's the only requirement.
So, if you want to use MiniTool's Partition Wizard to carve out sufficient free space for your second Windows 7 partition (by shrinking your existing Win8 partition), you can create one or more logical partitions inside that new free space, and do the Win7 install to one of those empty logical partitions. You can then use a second logical partition in that same free space for "data", if you want.
Note that Partition Wizard can even convert one of your existing primary partitions to logical (i.e. convert it to an "extended partition", inside of which will be then be the original primary partition now converted to logical). You can then shrink or move/resize the partitions on the drive (both primary and logical) however you want, to perhaps make room for additional "logical" partitions inside of that now present "extended partition" which can hold up to 120. You can even convert ALL of your primary partitions except for the one "active" partition (which MUST BE PRIMARY) to logical partitions, which gives you maximum flexibility in having even more than just two bootable OS's along with one or more data partitions, etc., up to 120 logical partitions... plus the one "active" primary Boot Manager "system reserved" partition which must be kept.

How or where do I find Windows Installer CleanUp Utility?

I have a Compaq Presario ,Windows XP. It seems Adobe has joined Goggle in cutting out the old boys.(Internet explorer 8). I am 86 and don't have the where with all to upgrade my computer. First my e-mail and now my Adobe reader. I have Reader XI listed in my Add/Remove file and cannot remove it. I successfully removed the other numbers but the XI gives me a message that the PatchPackage,could not be opened.It also tells me to get Windows Installer CleanUp Utilityto recifiy this. I need help.Please..

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

How to Dual boot Ubuntu and Windows 8 on X1 Carbon G2?

I currently have a Windows 8.1 64 bit installation on my carbon x1 and need to install ubuntu.
I was able to boot from the USB and install Ubuntu.
However, I have to change to Legacy Only in the BIOS settings if I want to go into ubuntu. If I try to select the Windows 8 in the GRUB startup, it gives me a ERROR with a black screen.
I tried to do select the BOTH option with Legacy first, but it goes directly into Windows 8 and doesn't let me select the operating system.

That would be fine if some hp machines didn't have broken UEFI that don't respect setting the default OS.

How to dual boot ubuntu and windows 8?

Hp envy 6 sleekbook 6z 1100
I have already disable the secure boot in the BIOS
But I still cannot install the ubuntu 13.04
The installation was good and smooth
But after reboot, there is no boot menu appear for me to choose which OS I want to boot
I wonder if HP locked something......... or should I turn on Legacy support in the BIOS? But ubuntu 13.04 should support EFL BIOS
I need Ubuntu for work!
This question was solved.
View Solution.

Thanks, I can boot into the Ubuntu now
Step:
1. After install Ubuntu along Windows 8, it will not boot into the Ubuntu
2, download EasyBCD --> backup your BCD setting first --> Add New Entry --> Linux --> GRUB2 --> Add
3. Once you reboot, the system allow you to choose either wind 8 or linux
4. choose linux , here is the trick part, Hp has something trick on their EFI bootloader, you should not able to boot to ubuntu
5. But when you press Esc, then F9, then you will see Ubuntu option
.............................. =.=
So
Just press Esc when you boot your laptop then F9 and shall be able to boot into Ubuntu.........

How do you boot from a Windows CD (Ghost in this case) in Boot Camp ?

I installed Bootcamp about a year ago. I used Norton's Ghost to make a disk image of my C: drive in Bootcamp for a backup. My machine is now misbehaving and I want to reinstall my orginal image from Ghost. However, I cannot figure out how to boot from the Ghost CD to begin the process. If I tap f8 or f2 or delete key nothing happens to bring me to that BIOS screen where I can choose which device I want to boot from at start up. Any ideas? Thanks

Hello deacm,
Supposedly you can insert your CD in the drive and, upon restart, (immediately after the chime) hold down the "C" key until the screen shows "Press any key to boot from CD". For some reason, this does not work for me.
If the above step didn't work for you, you can try the following steps that works for me:
1) If you can boot into Windows, insert the CD (close any windows that pop up), go to the Control Panel>Boot Camp and select the CD as the startup drive, then restart. The screen will briefly display "Press any key to boot from CD" (for only a moment) so press any key immediately.
2) If you can't boot into Windows, in Apple's System Preference, select "Startup Disk" and then click on the Windows partition. Close System Preference, insert the CD and (after a couple of minutes when the CD is recognized) restart. Immediately after the chime, hold down the "Option/Alt" key. Select the CD and press "Return". Moments later, the screen should display "Press any key to boot from CD", then press any key.
Good luck,
Gary
Message was edited by: Gary Kawamura

How to change Boot settings when Windows is not starting?

Ich bitte um Hilfe,
Ich habe unabsichtlich in der msconfig Anwendung bei start--> Erweiterte Optionen--> maximaler Speicher ein Häckchen rein gemacht und somit unabsichtlich den max Arbeitsspeicher
(wie mir erst später klar wurde) auf ca 2000 MB gestellt.
Leider ist es nun nicht mehr möglich den laptop zu starten, dies führt immer zu einem bue-screen und der HP Fehlerbehebung.
Was kann ich tun um das wieder um zu ändern?
Ich habe auch schon Versucht mit einem anderem OS zu starten (ubuntu auf SD karte) führt aber zu den selben Resultaten.
Was kann ich tun um das wieder umzuändern? (Am Besten wäre ein Befehl fuhr die Armin Console)
Vielen dank
Erebos

Please select your language from the drop down list at the top of the page to post your question in the language of your choice. The forum you posted in is for English only. If you do not find the desired language, support options for additional
international locations can be found by following the link below:
Bitte wählen Sie Ihre Sprache aus der Dropdown-Liste am oberen Rand der Seite, um Ihre Frage in der Sprache Ihrer Wahl buchen. Das Forum Sie im Thema ist nur für Englisch. Wenn Sie nicht finden, die gewünschte Sprache,
unterstützt Optionen für zusätzliche internationale Standorte können über den Link unten:
http://support.microsoft.com/common/international.aspx
Wanikiya and Dyami--Team Zigzag

Windows installer not booting after boot camp partition

I'm running OSX 10.9.4 and trying to boot camp windows 8. Everything is going right up until after the partition when the Mac restarts. It goes back to OSX and doesnt launch the windows installer.

I haven't really kept up lately but the only thing I see missing in your information is you didn't say if you had Formatted the Boot Camp partitiion to NTFS. The last I looked into Boot Camp that was one of the mandatory things you had to do in order for the installer to "see" the partition.
You end up formating it twice.
The original format when you make the Windows partition should be "Mac OS Extended (Journaled)" it's done by the Mac (BootCamp) then when your booted from the Windows installer you then have to format it again with the NTFS format. And of course it has to be on an internal drive. And a full install disk not an upgrade disk. Boot Camp 5?
Take a gander at the instructions again and see if you might have missed a step?
Hope it helped, at least I bumped ya up.......

Windows installer can't detect boot camp partition

Hello,
I recently bought my first iMac and I am trying to install Windows 8.1 using the Boot Camp Assistant. I have rebooted the Mac into the Windows installer program and made it to the screen titled "Where do you want to install Windows?" However, the Boot Camp partition I thought I created earlier is not showing on the list of available drives. I have tried hitting the Refresh button several times.
Any assistance would be greatly appreciated. Thank you for your help.

I haven't really kept up lately but the only thing I see missing in your information is you didn't say if you had Formatted the Boot Camp partitiion to NTFS. The last I looked into Boot Camp that was one of the mandatory things you had to do in order for the installer to "see" the partition.
You end up formating it twice.
The original format when you make the Windows partition should be "Mac OS Extended (Journaled)" it's done by the Mac (BootCamp) then when your booted from the Windows installer you then have to format it again with the NTFS format. And of course it has to be on an internal drive. And a full install disk not an upgrade disk. Boot Camp 5?
Take a gander at the instructions again and see if you might have missed a step?
Hope it helped, at least I bumped ya up.......

I am having problems trying to boot from my Windows XP startup disk.

PLEASE HELP ASAP! I upgraded my MacBook Pro 17inch laptop for a larger hard drive. I had my MAC and Windows XP partitions re-installed but I am not able to boot from Windows XP partition. I can see both operation systems in the system preferences of the STARTUP DISK section but when I shutdown my computer and hold down the OPTION key there is no WINDOWS XP icon. I keep getting the error message: NO BOOTABLE DEVICE. INSERT BOOT DISK AND PRESS ANY KEY.
I have a very important project to complete this Friday and all of my files are on my PC partition. Could someone please help me to figure out how to get my PC drive to start rebooting? I would sincerely appreciate it. Thanks!

courtesy of the following site:
http://www.builtfromsource.com/2008/04/05/a-match-made-in-****-windows-xp-boot-c amp-20-and-ntfs/
Feel like wasting several hours? Try installing Windows XP with Boot Camp 2.0 (the version released as part of Mac OS X 10.5 Leopard) using NTFS, the file system required for partitions larger than 32 GB. Then watch as it fails miserably, again and again.
Windows could not start because the following file is missing or corrupt:
<Windows root>\system32\hal.dll.
Please re-install a copy of the above file.
Sound familiar? You didn’t do anything wrong—this is actually Apple’s fault. Hal.dll, the “hardware abstraction layer”, doesn’t have any particular significance; it just happens to be the first file that Windows looks for as it’s loading. Attempting to replace this file with the copy on disk won’t work, and your boot.ini is probably fine.
So how do you fix it, then? The solution is a bit involved, but not too bad all things considered. Here are the steps:
If you haven’t already removed the bad installation, you’ll need to do so. In OS X, open Boot Camp, click Continue, select “Create or remove a Windows partition”, click Continue, and then click Restore.
Create a new partition as you did before, and start the installation.
After the computer has rebooted and it’s booted from the CD, type “R” to go to the console. You should be dumped to the C:\ prompt.
We’re going to reformat the drive as NTFS ourselves instead of letting the Windows installer do it. Type the following and hit Return:
format c: /q /fs:ntfs
Then type this to reboot the computer:
exit
Hold Option after it restarts, then boot to the Windows installation CD again (I believe it boots to the CD by default at this point, but this is just to be sure).
Install to C: (be careful not to select your OS X volume!), but—and this is important—choose NOT to reformat. Leave the file system as is.
Continue the installation process as you would normally.
That’s it! If things went well, the lovely 256-color Windows logo should load and you’ll be looking at Napa Valley in no time.

How do I boot a HP Pavvillion 500 pd fro a DVD?

I just got a new Pavillion 500 PC. It is running Windows 8---which I hate already---and I am having trouble doing things that were easy on previous HP Pavillions that I've owned.
In particular, I can't figure out how to boot from a bootable DVD in the DVD drive.    The default booting sequence ignores the DVD and just boots the system. I found a way going to a a recover menu which supposedly would let me boot from the DVD drive, but when I try it, it gives me an error message telling me that I am not allowed to do that. Apparently I need to set some system parameter, but I have no idea how to do it.
Can anyone give me a clue about how to do it.
My ultimate aim is to boot from an external USB drive containing a bootable version of Fedora LInux. Again, that should be possible with the same method, but I haven't tried it yet.
It seems to me that in certain cases, when the computer is all messed up, one sould be able to boot from a Windows installation disk in order to fix things. So I don't see why they make it so hard.

I understand what you say.
I assume the same would be true if I wanted to boot from a bootable external usb hard drive.
That is my ultimate aim.
One thing I need to get straight.    Is it true that I must reset the comuter to secure boot and the default settings in order to use windows.
If so, it hardly seems worth the troble to set up the comppter to daul boot Windows and Linx.   It would be simpler to get a separate computer on which to pt Linux.

Can't get into the Windows Installer

So, now I'm trying to boot into the Windows installer after partitioning my drive with Bootcamp Assistant. I've used this same Windows XP CD on another Intel computer in the past, as well as a real PC without any problems. However, on my Macbook Pro is just hangs right after rebooting. I have tried removing and adding the Windows partition about 4 times now, using both Disk Utility and BootCamp Assistant to no avail. I have also tried repairing permissions using Onyx. Please, any help would be GREATLY appreciated (I would even be OK with reformatting the whole **** drive destructively if need be).

I managed to get past the cursor by chance it seems, however after the initial copying of files before installation I get an error about a missing file which I know is not missing. I give up, Im going to try a complete reformat and attempt it again
EDIT: This is the same problem I am having now: http://discussions.apple.com/thread.jspa?messageID=7809195

Windows installer will not install ITunes 7 or Quick Time

I previously ran iTunes 4 with an earlier model iPod. Recently upgraded to iPod for video which was not recognized by iTunes 4. Attempted to download updated iTunes software and continue to be unsuccessful. Here's what happens:
I am able to download both iTunes 7 and QuickTime to my hard drive, but when invoke the respecive .exe files I get the same error message which reads, "This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package."

I have never heard of the respecive.exe file in regards to itunes or ipod. Are you sure you followed the troubleshooting steps word for word? I've had some people read the follow, "Empty your temp folder contents" to mean delete the temp folder. You have to be careful to follow them closely. I still sometimes have to reread some steps only to find out I didn't read it correctly the first time.
With that said, how do you know its a windows installer problem? If you were installing itunes & QT using their standalone installers there won't be a file called respecive.exe for either. You should be launching itunessetup.exe to install itunes (which can possibly contain QT). I forget what the standalone QT installer is called but I know it isn't respecive.exe.
Here are the steps I suggest to people who have trouble installing itunes. Please read them over first and ask a question if something isn't clear.
1. Uninstall itunes and ipod software
2. Reboot your PC
3. Re-download the itunes installer and QT and save this installer to your desktop
4. Go to C:\WINDOWS\Downloaded Installations. You should see folders like {06EB3288-C5F4-4C73-8EEE-AC798668FF66}
5. Look in each of these folders for itunes.msi and delete the folder. Be careful to only delete the folders containing itunes,msi
6. Clean out your temp folders, Delete as much as you can in these folders except for the folders Cookies, History, Temporary Internet Files.
a. C:\windows\temp (if one exists)
b. C:\Documents and Settings\{username}\Local Settings\Temp
Sometimes installers will pick up old files or won’t delete their temporary files.
7. Go to http://www.download.com/3000-2094-881470.html and download the regcleaner. Unpack it and run it. This is a nice utility that will delete broken registry entries and create a file with them. This way if it deletes anything needed you can add it back. Note I never had to do this with using it for many years. Also it doesn't list XP but you'll be fine. I run XP on both.
8. Reboot your PC.
9. Now try to go and install everything again. I'd do QT first then follow with itunes. Remember to disable virus/firewall/privacy/web accelerators before launching the install.

Want to install Windows 7 to my Mac with Boot Camp, but my laptop's monitor is broken. How could I start the Windows installation through an HDMI video source?

Hi everyone,
I'm trying to start a bootcamp installation of Windows 7 though an external monitor using HDMI. Is there anyway to have the installation screen show up on the external monitor? I get stuck at the beginning of the installation due to not being able to use my laptop's primary screen.
Thanks for the help!

Kapil Choubisa wrote:
when I try complete step 2, it always says "The Installer dick could not be found".
Unless you have a 2010 Mini Server model, your Mini has a built-in Optical drive (Mac mini (Mid 2010) - Technical Specifications).
Can you read the Windows Installer media when booted on OSX? Your DVD media may be corrupt.
If your Optical Drive is functional AND the Windows DVD is readable in OSX Finder, then your installer should work. You will need a USB2 for BC drivers as well.

Boot Camp Assistant "Windows 7 Installer disc could not be found"

I'm attempting to Boot Camp a partition on my MacBook Pro Retina (13", early 2013) and it's not working. I purchased a Windows 7 Home Premium 64bit DVD and i'm accessing it through the optical drive on my desktop iMac. So far so good; MBP shows the disc on its desktop through remote disc sharing. The USB drive with downloaded Windows drivers is in place.
However, Boot Camp Assistant won't recognize the Windows 7 DVD, even though it's right on the desktop (remotely). There is a dialog box and it says "Installer disc could not be found .. wait a few seconds"
And that's it. Nothing further happens.
Help! I hate Windows! Why am I doing this??

Lightwave wrote:
Thank you! I bought Windows 7 on a physical DVD (it's the Home Premium 64bit disc). Hope that was the right thing to do?
Yes.
So let me get this straight. I can either use this DVD directly on a superdrive plugged in to MBP, or else burn a copy to the USB stick.
MBP will not install from an external SuperDrive due to Windows installer limitations, because it has no driver for the SuperDrive.
How exactly do I do the latter since my own DVD reader right now is by remote disc on my iMac?
Create an ISO using the following procedure on the iMac and then copy it over the network to the MBP or create an ISO by attaching the SuperDrive to the MBP. Use Bootcamp Assistant to point to this ISO when creating the USB for installation.
From Disk Utility 12.x: Duplicate a disk, CD, or DVD
Step 7 will give you an ISO, that you can then copy to the MBP.
Duplicate a CD-RW or DVD-RW
Disk Utility can’t create usable copies of discs with an incompatible format or discs that are copy-protected. (These include most commercial movie DVDs and audio CDs and some software and data discs.) To copy music from an audio CD to another CD, use iTunes, not Disk Utility.
To burn a disc, you need an optical drive in your computer or connected directly to your computer. You can’t burn a disc using a remote optical drive.
Open Disk Utility, in the Utilities folder in Launchpad.
Insert the CD or DVD disc in the optical drive, and select it in the list at the left.
Choose File > New > “Disk Image from [disc name].”
Type a name for the disk image.
Choose an option from the Image Format pop-up menu.
Choose “compressed” to create a smaller disk image.
Choose “read-only” to create a disk image that’s quicker to create and open.
Click Save.
After Disk Utility creates the disk image, eject the original CD or DVD.
Select the disk image in the list at the left, and choose Images > Burn.
When the Burn Disc dialog appears, insert a blank CD or DVD, and then click Burn.
You can continue using the disk image to create as many duplicate discs as you need.

How do I boot up my windows 7 installation?!

Similar Messages

Maybe you are looking for