How do I bounce audio and midi tracks at the same time to burn a CD?

Hi there,
I would like to bounce a song with both audio and midi tracks recorded in it onto a CD.
Despite ensuring that I am doing a realtime bounce (not offline) I am only getting the audio tracks burnt onto the CD - the midi isn't getting bounced to the final output.
This must be a stupid question, if someone would be so kind as to give me an obvious answer I would be most grateful.
Thankin y'all
amata

Hi A,
if you use the instrument (with logic virtual synths) tracks for midi,
it will.
BTW, why don't you do it offline?
It will be so much faster.
Kindly regards,
Jorge

Similar Messages

How do I make Organizer and Editor open at the same time?

I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
Thanks,
K

Create Desktop shortcuts for the Organizer and the Editor:
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Ken

Mulitple controllers and multiple tracks at the same time

I have multiple keyboard controllers and rack modules. I would like to have each of them individually control their own midi tracks(connected to external rack modules) at the same time, so I can record live performances. Right now I create a track set the port and channel and I can play the desired external module one track at a time, but the second I try to use more than one controller they all play the same module.
I come from Pro Tools.... and in that program for each channel I am able to select an input port/channel and an output port/channel and it works fine, but in logic I can't seem to select an Input port/channel for the individual tracks, they all seem to be the same. Where or how would I do this so I can streamline my setup?

http://discussions.apple.com/thread.jspa?messageID=8065879&#8065879
Eddie

How to listen to music and record sound at the same time

I want to figure out a way to record sound and listen to my music at the same time. Most recording apps stop my music when it starts to record and I can't find an app that does both. Any ideas?

Not possible since the iPod only has one audio processor.

Recording Audio and Software Instruments at the same time

Is there anyway to record a live audio track while recording the drum track with the ES-Blah blah blah? i can never remember the number.
Im sure that you have seen this question before, but at least you will get a few good points for answering the question again.
-Frisco

Click record on the MIDI/Inst track.
Shift click record on the audio track.
Hit record

Can Flash play multiple audio and video files at the same time?

Hello,
I would like to create a web-based client/application that
can play multiple a/v files or stream multiple a/v files at same
time. Is this possible with Flash, without the use of RTMP? If yes,
can you please provide an example. Thanks in advance.
Regards,
Nilang

You never edit within a clip. The purpose of opening a clip is to make sync adjustments, audio equalization, color correction, stabilization, things that you might want do overall to the master clip before you edit it. You edit the portion of the clip you want from the browser into a project. There is really very seldom any need to open a clip into the timeline.

How to read two counters and writing AO at the same time with 6024?

I use Labview to read two quadrature encoder outputs and I use the two
counters
of 6024E for this. I can read the encoders continuously. I also want to
send an
analog output with a period of 30 miliseconds
while the reading of encoders is continuouing at the background. How can I
do
this. I searched the NI discussion forums and found that my device have
only 1 DMA channel. Is it possible to overcome the problem using
interrupt??(set device information.vi) Is there any example code about this
problem?
Thanks a lot.."

Hi Ress,
I think you might have asked this question twice by mistake. Following is the link to the one that was answered:
http://exchange.ni.com/servlet/Redirect?id=12017430 .
Thanks!
Serges Lemo
Application Engineer
National Instruments

Can i play audio and record video at the same time, disabling the external mike, so the video has that audio?

can i play audio while recording a video so that the audio is recorded with the video? .. disabling the inboard mic, ? .. thank you

Hi SwedelostinAmerica,
Welcome to the Apple Support Communities!
The iPhone can maintain multiple pairing records, but it can only connect to one headset or hands-free device at a time. However, in your situation there may be a solution. You can connect the iPhone via Bluetooth for calls and use the 3.5mm jack on your iPhone and car radio to connect for music.
The following article explains Bluetooth pairing and usage. Please use it as a reference.
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Have a great day,
Joe

How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?

How can I record an Audio Instrument, and listen to a reference track at the same time?

Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs.

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

How can i synchronize analog output and analog input timings to generate and measure voltage at the same time.

how can i synchronize analog output and analog input timings to generate and measure voltage at the same time.

Read this Tutorial
http://zone.ni.com/devzone/cda/tut/p/id/3615#toc3
And also refer to this link where You have repeated this question.
PS: Please stick to one thread. That way, its easier to keep track of your query and answers

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

Try one of these extensions for multiple cookie sessions.
Multifox: 
http://br.mozdev.org/multifox/ 
Cookie Swap extension: 
https://addons.mozilla.org/firefox/3255/ 
Cookie Pie extension: 
http://www.nektra.com/oss/firefox/extensions/cookiepie/

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

Hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me

hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?

RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

How do I bounce audio and midi tracks at the same time to burn a CD?

Similar Messages

Maybe you are looking for