How do I "bounce between locators" to render audio within a comp?

Hi,
Is there way to "bounce between locators" to render audio within a comp?
In editing my vocal comp, I realized that I needed to extract a better version. So I just want to render the one phrase that I need and have it output to a separate track, or the audio bin, or wherever. I don't need to bounce the whole track and waste time and memory.
Thanks a million

I answered my own question, in case anybody else had the same question.
It's simple...just set the locator and bounce. To bounce the whole song, you set the locator for the whole song.

Similar Messages

  • Terminals bouncing between AP's

    We just installed WCS, 2 WLC 4402's with 29 1131 AP's. I have a user who is half way between 2 AP's. He keeps bouncing between the 2 AP's and gets a pop up message each time he does. He has an IBM T43 with a built in wireless card. How can I keep him associated just to one of the AP's. He is a Director so this is a big issue for him. I do not see anything in WCS or the WLC to designate a client to a specific AP. Any help on this would be great.

    Under the Intel card properties there was a Roaming Agressively option, by unchecking the default if I moved the slide bar to a lower setting the card is more sticky to a AP. The higher setting causes the card to always move to the stronger signal so ther is much more roaming. Thanks for your help. Something else I noted was that by default the card is set to connect 802.11g over 802.11a.

  • I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up und one account.

    I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up under one account.

    You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

  • HT1203 iTunes: How to share music between different accounts on a single computer - I tried to use the instructions to configure 2 different windows users sharing the same iTunes library.  I could not get this to work per the instructions.

    I tried to configure 2 windows users accounts using a single library per the instructions in HT1203.  My iTunes library is on an external drive.  I cannot get this to work.  Any suggestions?

    To give other users read-only access to your iTunes library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
    If you want to give full read/write access to more than one user, see the support article linked below.
    iTunes: How to share music between different accounts on a single computer
    There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

  • I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

    I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

    Wayland wrote:
    The CS.com service account has long been closed. I cannot get it to respond to my years ago password for that account. So I ask them to send me a new password and of course it goes to my years ago email number.
    Don't have it send email.
    Answer the security questions.

  • I have 2 profiles on one computer. How to share music between the profiles in itunes?, I have 2 profiles on one computer. How to share music between the profiles in itunes?

    I have 2 profiles on one computer. How to share music between the 2 separate profiles in iTunes?

    iTunes: How to share music between different accounts on a single computer
    This might help. info provided by 'b noir'
    iMoz

  • How to share music between different accounts on a single computer

    I am trying to share music on my Mac between two different iTunes accounts.  Can this be done?

    iTunes: How to share music between different accounts on a single computer - http://support.apple.com/kb/HT1203 - relocating iTunes' media folder to a shared area but leaving separate library files - extra tip at https://discussions.apple.com/message/17331189

  • How can I share between 2 different accounts.  we have a clinic that serves pediatics and unfortunately, they set up two different accounts within our agency.

    How can we share between two different accounts on the same iPad?  We have a therapy clinic with 2 devices and want to share apps. I did not set up the second one, but how can we fix this ?

         Hi Rosdy, to get the most out of iCloud it is recommended that you use the same account between devices. Thus whenever you buy something on your phone it becomes accessible from your laptop regardless of whether your synced it over usb or not. *
         For more information on iCloud usage please click here.
    * This feature requires that both devices be on the same WiFi network.

  • We have two ipads in the house and sync on one computer.  How do we switch between apple id s

    We have two ipads in the house with separate apple IDs.  How do we switch between these on the only laptop in the house

    On your iPad go to Settings>iTunes & App Store
    Tap on the Apple ID shown and select log out.
    Regards,
    Steve

  • How can i connect between WS−G5484 1000BASE−SX and GLC-LH-SMD ?

    Dear experts,
    My customer has 6509 A-side and B-side core switches and need to migrate only 6509 B-side to Nexus.
    I have some question below.
    1. Customer's 6509A-side has multiple WS−G5484 1000BASE−SX and WS−G5486 1000BASE−LX links and it is connected to 6509B-side.
    But customer bought only GLC-LH-SMD for Nexus migration of 6509B-side.
    I understood BLC-LH-SMD doesn't support SX type, so I am worndering how i can connect between 2 different module ?
    Or should i have GLC-SX-MMD for WS−G5484 1000BASE−SX links ?
    2. Current Rack has LC type patch pannel from B-side to Rack A side.
    But new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
    So If i want to connect from LC-type to Sc-type patch pannel, how can i connect ? do i have to use SC-LC converter ?
    3. Old 6509 links use many MMF cable, and new Nexus use SMF.
    Between same LX/LH links, if a side use MMF and another side use SMF, how can i connect each other ?
    Again new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
    Please let me know in detail, Thanks in advance, I really appreciate for your help.
    Jason.

    Hi Leo,
    Thanks of your reply.
    Dear Experts,
    I seek your expert's advice for another question urgently.
    Please make you time and share your experiecce.
    Thanks.
    Jason

  • How can i distinguish between set or tuples from incoming filters in a calculation

    How can i distinguish between set or tuples from incoming filters in a calculation. i am using descendants function with the leaves option to calculate some project revenue cause there is different calcuation method on sub projects the sum on the main project
    should reflect the sum of the sub project with all different methods.
    this works fine until i try to select 2 sub projects at the same time. i am getting the standard currentset dosnt work cause its a set.
    is there i way i can check if its a multiple select or not and handle it a different way

    Hi,
    Check the following link about Multi Select Calculations written by Mosha.
    http://sqlblog.com/blogs/mosha/archive/2007/01/13/multiselect-friendly-mdx-for-calculations-looking-at-current-coordinate.aspx
    Best regards...
    Chandima Lakmal Fonseka

  • My daughter and I both have an iPhone and we have shared my apple ID. Now her phone is syncing with mine and we want to have different contacts. How do I differentiate between the two phones?

    My daugher and I both have an iPhone and we have shared my apple ID. She just replaced her phone and now our contacts are syncing -- and we don't want that. How do I differentiate between the two phones?

    Is the same Apple iCloud account being accessed on each iPhone?

  • How can I switch between multiple windows of the same application (e.g. Safari) over several desktops ?

    Hi All,
    I have one application, for example safari, open and running with multiple windows (with or without tabs) spread over several desktops.
    How can I switch between the windows only via keyboard? CMD+> and CMD+< let me only swicht between windows open on the one desktop I am currently looking at.
    thanks for your replies,
    equi

    Barney,
    many thanks for your efforts and your time (preparing and posting the screenshot, answering to this question,...).
    Unfortunately, moving the focus to the next window only works with windows on the same desktop.
    btw, using a german keyboard layout and german language settings the shortcut is "cmd+<".
    I can switch with this shortcut between different windows of my Safari which reside on the same desktop, but I cannot swith between different safari windows distributed over several desktops.
    Thanks,
    equi    

  • HT3819 How to use homesharing between different user accounts on the same iMac?

    I find plenty of articles about homesharing on iTunes between computers, but not between two different user accounts on the same iMac.  Any advice or direction to an existing artical is greatly appreciated.  I'm knew to the Mac and still have Windows on the brain.
    I am trying to share iTunes music and movie purchases between my user login and my wife's.
    Thanks

    Hello careymp1017,
    This can be achieved, but will not utilize HomeSharing. Further information and steps can be found in the following article.
    iTunes: How to share music between different accounts on a single computer
    http://support.apple.com/kb/HT1203
    Cheers,
    Allen

  • HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

Maybe you are looking for