How do I bring it out of hibernation when it is in black screen

Is system simulating hibernation

Try a hard reset. Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

How to flash bios for aspire 5745 when you have a black screen

I attempted to update my bios for my Acer Aspire 5745 notebook and chose the wrong file. The computer is giving me a black screen now. When I push the start button the lights come on the fan blows and thats all. I found a few sits on line giving me the procedure to flash an aspire one system. Here is the steps I took to do so to no avail. 1. When to the acer site and put the SNID number to my laptop to pull up my suggested downloads for my system. 2. I downloaded the file to my working computer. 3. I extracted the file and opened the file that said DOS. 4. I renamed the file zg5ia32.fd 5. checked my flash drive to make sure it is set to ( FAT ). 6. Transfered the file to the flash drive. 7. Pluged in the flash drive to my dead laptop while it was pluged into a powersorce. 8. Held down the FN and ESC buttons while pushing the power buttons. 9. Released the FN and ESC buttons when I noticed the power light blinking and the flash drive light up. 10. Waited for over 15 min. but had no success. If anyone could tell me what I may have done wrong I would be much appriciated. I also opened up the backside to the laptop and removed the little battery that was plugged it with a small white connector assuming it was the cmos battery but still nothing happended.

I was never able to properly flash my bios. I had wondered if when I tried to update it I may have destroyed my bios in the process. Anyways I had purchased a motherboard for I think around 50.00 on ebay. It was used but was complete. All I had to do was take out the old motherboard and replace with the other one. It all came on after that with a new knowledge of not fix something that is not broken.

Hi fellas could anybody know how to get back calendar out from trash to original dock below the screen

Im having problem getting my calendar out from trash(not deleted) to where this belong to dock below the screen accidently click when im using apps cleaner,i try to swipe my application from trash bin to dock station but keep bounce back to bin,i check on help site said simply open trash bin select the application you want to save,go to top screen see finder then go to file and click say PUT BACK but main issue is that words are grey out ,im on mountain lion version 10.8.4 at the moment for now i can only use calender by swipe from trash bin to desktop its only i can open than click main dock of calender will say unable to open because it in the trash so can anybody know how to get this out in any way,i dont like to have two icons of calendar on desktop and dock station....i be happy can somebody give advice.......regards

and prior to that ihave uploaded my all the photos and videos to icloud from iphoto
Which part of iCloud are you referring to? iCloud Drive? iCloud Photo Library Beta? My Photo Stream? Shared Photo Stream?

How can I avoid running out of memory when creating components dynamically

Hello everyone,
Recently, I am planning to design a web application. It will be used by all middle school teachers in a region to make examination papers and it must contain the following main functions.
1)Generate test questions dynamically. For instance, a teacher who logs on the web application will only see a select one menu and a Next Quiz button. The former is used for determining the number of options for the current multiple/single choice question. The later is dedicated to creating appropriate input text elements according to the selected option number. That is to say, if the teacher selects 4 in the menu and presses the Next Quiz button, 5 input text form elements will appear. The first one is for the question to be asked such as "1.What is the biggest planet in the solar system?", the others are optional answers like a)Uranus. b) Saturn. c)Jupiter. d)Earch. Each answer stands for an input text elements. When the teacher fills in the fourth answer, another select one menu and Next Quiz button will emerge on the fly just under this answer, allowing the teacher to make the second question. The same thing repeats for the following questions.
2)Undo and Redo. Whenever a teacher wants to roll back or redo what he has done, just press the Undo or[i] Redo button. In the previous example, if the teacher selects the third answer and presses the Delete button to drop this answer, it will delete both the literal string content[i] and the input text element, changing the answer d to c automatically. After that, he decides to get back the original answer c, Jupiter, he can just click the Undo button as if he hadn�ft made the deleting operation.
3)Save the unfinished working in the client side. If a teacher has done half of his work, he can choose to press the Save button to store what he has done in his computer. The reason for doing so is simply to alleviate the burden of the server. Although all finished test papers must be saved in a database on the server, sometimes the unfinished papers could be dropped forever or could form the ultimate testing papers after several months. So if these papers keep in the server, it will waste the server computer�fs room. Next time the teacher can press the Restore button on the page to get the previously stored part of the test paper from his own computer and continue to finish the whole paper.
4)Allow at least 1,000 teachers to make test papers at the same time. The maximum question number per examination paper is 60.
Here are my two rough solutions,
A.Using JSF.
B.Using JavaScript and plain JSP[b] without JSF.
The comparison of the two solutions:
1)Both schemas can implement the first and the second requirements. In JSF page I could add a standard panelGird tag and use its binding attribute. In the backing bean, the method specified by the binding attribute is responsible for generating HtmlInput objects and adding them to the HtmlPanelGird object on the fly. Every HtmlInput object is corresponding to a question subject or an optional answer. The method is called by an actionListener, which is registered in the Next Quiz commandButton, triggering by the clicking on this button in the client side. Using JSF can also be prone to managing the HtmlInput objects, e.g. panelGird.getChildren().add(HtmlInput) and panelGird.getChildren().remove(HtmlInput) respond to the undoing operation of deleting an optional answer and the redoing operation of the deleting action respectively. I know JavaScript can also achieve these goals. It could be more complex since I don�ft know well about JavaScript.
2)I can not find a way to meet the third demand right now. I am eager to know your suggestion.
3)Using JSF, I think, can�ft allow 1,000 teachers to do their own papers at the same time. Because in this scenario, suppose each questionnaire having 60 questions and 4 answers per question, there will be approximately 300,000 HtmlInput objects (1,000X60X(4+1)) creating on the server side. The server must run out of memory undoubtedly. To make things better, we can use a custom component which can be rendered as a whole question including its all optional answers. That is to say, a new custom component on the server side stands for a whole question on the client side. Even so, about 60,000(1,000X60) this type of custom components will be created progressively and dynamically, plus other UISelectOne and UICommand objects, it also can�ft afford for most servers. Do I have to use JavaScript to avoid occupying the server's memory in this way? If so, I have to go back and use JavaScript and plain JSP without JSF.
Thank you in advance!
Best Regards, Ailsa
2007/5/4

Thank you for your quick response, BalusC. I really appreciate your answer.
Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
Best Regards, Ailsa

Any suggestions for a wet iPhone? It's dried out, but all I get is a black screen, even when hooked up to charger. You think the apple people could actually fix this?

I got a wet iPhone. It's dried out now, but still dark screen, even when plugged in

Hence the term "OUT OF WARRANTY EXCHANGE".

How do i get my iPhone to stop got on the blank black screen with the logo after the update in iOS 7?

I am really having some problems with my phone after my iOS 7 update . now my phones going off and on to the apple logo. i waited for 7 hours aready please help me im just a teen who needs help on my iPhone.

Hey jel177!
It seems like you may need to turn off your iTunes in the Cloud features and download or sync the songs manually to your phone. Here is a link that can help you adjust those settings:
iTunes Match - iPhone
http://help.apple.com/iphone/7/#/iph6e2dfb83
Then, you can use this link to find your purchases and download them to your phone:
Download past purchases
http://support.apple.com/kb/ht2519
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Firefox doesn't bring back the menu bar when toggling back from full screen view(F11)

I have recently been using the full screen view (pressing F11). This works fine until I press F11 again to resume normal view when the menu bar does not appear. This means I cannot see the minimize / maximize / X buttons on the top right. Also, if there is another window open i.e. Word sometimes parts of this show through on the Firefox window. I try to use the latest version and so am currently using version 3.6.8
== This happened ==
Every time Firefox opened
== Not sure - maybe after the latest update?

No, dont return it, its a glitch in Safari, and VERY annoying. I first would have to Force Quit Safari, but later learned to keep hovering the mouse in the upper right corner, even tho nothing, yeah nothing,,,,is visible.
Keep the mouse there, and after a bit, you will see the little arrows pointing in, hit them.
But to keep this from happening again, Im not sure.
So anybody with further info, please post it here.

How do I fix an Ipod Touch 4G when it has a white screen and maybe water damage

I jumped in a lake with my ipod in my pocket and stayed in there for about an hour and about a week and a half in the rice container, my Ipod Touch 4G has a white screen and i tried to restore it and reset it but nothing worked, please help me!

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple will exchange your iPod for a refurbished for this price:
Apple - Support - iPod - Repair pricing

How do I bring Satellite A100 out of hibernation?

I was working away and didn't notice I was not plugged in to the mains. My battery ran out and tosh went into hibernation. The on/off button is glowing blue. What do I press to bring it out of hibernation?
Thanks

Hi
I agree with Stefan. To start up the unit you have to press the power button again.
Dont ask, try it ;)

BLACK SCREEN how to erase

The screen on my Curbe turned, af a few distubing white flashes totally black.
The edivice still starts up but nothing to see.
I want to bring it in for repair but not without erasing the information stored upon it.
How can I erase it completely without using the interaction through the (black) screen?

Hi and Welcome to the Community!
As long as there is no on-device data entry required when you connect to a computer via USB, you can use the ResetToFactory Wipe:
Article ID: KB31291 How to reset a BlackBerry smartphone to factory settings using BlackBerry Desktop Software
You also can try tools such as BBSAK.ORG.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT2370 How to wake a black screen?

Anyone know how to make a headless Mac mini show something else than a black screen with ARD and/or VNC? One would have thought Mac mini would be good as servers, but that is apparently the one thing they are designed not to be able to be used as, given how the hopeless ARD program "works". I have tried all kind of SSH commands etc. but no way. So what to do if you are unable ever to access the computer physically after having it shipped off to a destination? Buy some better remote control software? Have searched the Internet, but no answers ... .
/Jerry

Maybe this is the only solution:
http://blog.macminicolo.net/post/33839671756/build-a-dummy-dongle-for-a-headless -mac-mini
Just that it worked before to access with ARD and nothing happened since then. Also cannot re-activate ARD, only VNC though SSH for some reason ... .

How can I bring 2 photos in Creative Cloud to work on? I would like one as a background the other I want to cut something out to put in the background.

How can I bring in 2 photos to use in Creative Cloud to work on? I would like one as a background and the other I would like to cut something out and put it in the background picture. Help Please!

Creative Cloud is not a program, it is a marketing and delivery process
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
So... what is the name of the program you are using?

After making a call I put my phone in my pocket and when I bring it out to make a call the player is on killing battery life. How can I shut the player off or prevent this from happening?

after making a call I put my phone in my pocket and when I bring it out to make a call the player is on killing battery life. How can I shut the player off or prevent this from happening?

Try to position your iphone that the screen is facing away from your skin.
Make sure that the back part of your phone will be the one that will contact your skin inside your pocket
Thats what i do:)

I added a foreign language in setup. How do I bring out its keyboard?

I added a foreign language in setup. How do I bring out its keyboard?

After selecting your keyboards, a globe symbol key will appear on your keyboards.
Tap it to cycle through the keyboards you have enabled.

TS2771 the blue A apple store icone was wiped out from the first page how can I bring it back to live again

the blue A apple store icone was wiped out from the first page how can I bring it back to live again

See my response to your other post.
B-rock

How do I bring it out of hibernation when it is in black screen

Similar Messages

Maybe you are looking for