How do i bring the kuler swatches into Photoshop?

How do i bring the kuler swatches into Photoshop? I don't see any buttons that say "download" or anything like that.

Yes, i logged in and hit the download button. When i open up the
file i get a message that reads "melody.ase is an unknown format and
cannot be opened." I changed the extension, but still no luck.
You can't "open" the .ase file. You must load it into Illustrator,
Photoshop, or InDesign (versions CS2 or later). Go to the Swatches
panel in the respective application and choose "Load Swatches" from
the panel's flyout menu.
Mordy
Mordy Golding
Author, Consultant, Trainer
Adobe Community Expert
Blog: http://blog.mordy.com/
Follow me on Twitter: http://twitter.com/mordy

Similar Messages

How do I load new kuler themes into photoshop CS6

How do I load new kuler themes into photoshop CS6?
That's it, plus the Kuledr desktop app (Mac version) always gives me a Kuler Klash?

Are you sure it is not stand alone? Google Sketchbook Express & Photoshop CS6, and you get no meaningful hits. Google just Sketchbook Express and it brings up links than say stuff like:
If you've just switched to Mac and are looking for a replacement for MS Paint, then SketchBook Express is a fun drawing application that's suitable for everything from a quick doodle to professional sketching.
SketchBook Express uses professional-grade tools that enable you to produce some highly impressive results. The streamlined interface allows for what is known as "gesture-based marking menus" which mean that different tools are available to you at the click of a mouse. However, to get the most out of SketchBook Express, you'll need a pen and tablet device.
There are many preset tools,
Read more
Pros
Suitable for doodling and professional sketching
Good alternative to MS Paint
Easy to switch main tools
Cons
Best to be used with pen and tablet device
May not be fully comptaible with all tablets
Lacks advanced sketching tools

How Can You Bring Illustrator Cs5 Layers into Photoshop Cs5?

Hi everyone, Is it possible to bring Illustrator artwork into Photoshop so that the layers in Illustrator are layers in Photoshop, and so that all the content is arranged as it was in Illustrator.
What I have been doing is bringing in a shape or a group of shapes into Photoshop by pasting them into a layer in PS then bringing in some more stuff from another layer in Illustrator and pasting that into another layer in PS but obviously it's a mission to line up the contents again so it is arranged like it was in Illustrator in the first place.
Any help appreciated
thanks Gareth

No, it doesn't say how to do it there
Well, then you probably haven't read carefully enough about what can be set up when exporting as .psd in Illustrator.
When you export as .psd there are several export options about preserving layers. As mentioned, there are some restrictions.
But tell me, what is unclear about the following quote?
Write Layers
Exports groups, compound shapes, nested layers, and slices as separate, editable Photoshop layers. Nested layers that are more than five levels deep are merged into a single Photoshop layer. Select Maximum Editability to export transparent objects (that is, objects with an opacity mask, a constant opacity less than 100%, or a blending mode other than Normal) as live, editable Photoshop layers.
Preserve Text Editability
Exports horizontal and vertical point type in layers (including nested layers up to five levels deep) to editable Photoshop type. If doing so compromises the appearance of the artwork, you can deselect this option to rasterize the text instead.
Maximum Editability
Writes each top-level sublayer to a separate Photoshop layer if doing so doesn’t compromise the appearance of the artwork. Top-level layers become Photoshop layer sets. Transparent objects remain editable transparent objects. Also creates a Photoshop shape layer for each compound shape in a top‑level layer if doing so doesn’t compromise the appearance of the artwork. To write compound shapes with solid strokes, change the Join type to Round. Whether or not you select this option, all layers over 5 levels deep are merged into a single Photoshop layer.

How to bring the labour cost into costestimate

Hi friends,
How to bring the labour cost into costing run, please let us know. i have given the configuration settings but i am not able to get the accurate result. so friends please help me on this.
where were i have to give the config settings and the links please tell me.

Dear,
The cost sheet format is,
1. Material cost,
*2. Labour cost -
SPRO -> Controlling -> Product Cost Controlling -> Product Cost Planning -> Basic Settings for Material Costing -> Overhead -> Costing Sheet: Components -> Define Calculation Bases*
1. Here just check whether you have assigned the Labour cost Cost elements with Labour group or not.
2. T Code - OKTZ : Check whether you have assigned the Cost elemnts here or not
3. Labour cost is based on : Activity types and Cost center figures updation in KP26
Let us know if you still need any help
Thanks
Edited by: nkonnipati on Feb 15, 2012 4:01 PM

Using AOL email how do I bring my SMTP password into line with my actual password so I can send email?

Using AOL email how do I bring my SMTP password into line with my actual password so I can send email? Thanks.

I'm trying to go from memory now when it happened to me, but try turning the server Off. See if that ungreys the setting so that you can enter the password and username. I believe on my one AOL account what I did was to select another SMTP server from the list below the primary server.

How do I get the pictures folders in photoshop 7 out of My window XP computer and put them into my new computer windows 8 photoshop12

How do I get the pictures folders in photoshop 7 out of My window XP computer and put them into my new computer windows 8 photoshop12

I am so sorry for you and your situation. Were you using iCloud photostream?
Otherwise I do not see any chance for your precious photos.
Congrats anyway on the little darling!

I ended up having two id's, one being my original when first getting into itunes and the other came when I opened a me account. I have purchases under the original id. How do I merge the old account into the new account

I ended up having two id's, one being my original when first getting into itunes and the other came when I opened a me account. I have purchases under the original id. How do I merge the old account into the new account

Sorry, but it is not possible to merge two Apple IDs/iTunes Store accounts.
Regards.

ITunes is indicating i have another iTunes library, how do I combine the 2 libraries into 1? Previous computer was a PC using iTunes.

iTunes has indicated i have another iTunes library, how do i combine the 2 libraries into 1?
My previous computer was a PC. I synced iTunes with my iPhone until the hard drive died, then I bought an iMac.
Thanks for you help.

I want to be able to transfer my apps from my original itunes account that I have on my personal iphone 3 and work ipad 3 to my work iphone 4S ,as well as purchase more more apps for the work iphone with the original itunes account. Plus I need to sync all 3 of them with my work tower computer. I really appreciate you're trying to help me out.

I have icloud and downloaded new CDs on my 2nd computer. How do I download the new music into my old computers itunes.

I have icloud and downloaded new CDs on my 2nd computer. How do I download the new music into my old computers iTunes using icloud.

For your computer first get iTunes to see it by:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
- The transfer iTunes purchases
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Or redownload them by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Transfer other music by using a third-party program like one of those discussed here:
newer copy
- Connect the iPod to your compute and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup
Note that the backup that iTunes makes does not included synced media like apps and music.

How to SIMPLY use the %DIMENSION_TO_SET% variables into logic scripts

hello,
I'm using a prompt of type "COPYMOVE" or "COPYMOVEINPUT". In this type of prompt, there are 2 columns of dimension members list, one for defining the "source zone" and one for defining the "target zone" of logics.
The left colum of the prompt (for source zone) feeds the variables %DIMENSION_SET% : %ACCOUNT_SET%, %ENTITY_SET%, %CATEGORY_SET%, etc...and these variables can be used in the logic scripts in *XDIM_MEMBERSET instructions for example.
The right colum of the prompt feeds the variables %DIMENSION_TO_SET% : %ACCOUNT_TO_SET%, %ENTITY_TO_SET%, %CATEGORY_TO_SET%, etc...and I don't know how to SIMPLY use these variables in the logic scripts.
I've found a tricky way to do that but I meet 2 problems :
- it is complicated
- the multi-info instruction (BEGININFO/ENDINFO) seems to be bugged as blank lines are added all the time in the code and sometimes I have to wait for minutes when I try to modifiy the package code through BPC for excel eData/modify package menu.
So the question is how to SIMPLY get the %DIMENSION_TO_SET% variables into logic scripts and use them ? Thanks, R.
Here is the tricky package code I use at this time (I build one function for each %DIMENSION_TO_SET% variable and I pass these functions to the logic) :
PROMPT(COPYMOVE,,,,"ACCDETAIL,ACCOUNT,CATEGORY,DATASRC,ENTITY,TIME,YEARS")
TASK(Execute formulas,USER,WS-WW\PlauchuR)
TASK(Execute formulas,APPSET,US)
TASK(Execute formulas,APP,SV)
TASK(Execute formulas,SELECTION,D:\BPC\Data\WebFolders\US\SV\PrivatePublications\PlauchuR\TempFiles\FROM_1561_.TMP)
TASK(Execute formulas,TOSELECTION,D:\BPC\Data\WebFolders\US\SV\PrivatePublications\PlauchuR\TempFiles\TO_1561_.TMP)
BEGININFO(%FSS%)
*FUNCTION TARGETACCDETAIL=%ACCDETAIL_TO_SET%
*FUNCTION TARGETACCOUNT=%ACCOUNT_TO_SET%
*FUNCTION TARGETCATEGORY=%CATEGORY_TO_SET%
*FUNCTION TARGETDATASRC=%DATASRC_TO_SET%
*FUNCTION TARGETENTITY=%ENTITY_TO_SET%
*FUNCTION TARGETTIME=%TIME_TO_SET%
*FUNCTION TARGETYEARS=%YEARS_TO_SET%
ENDINFO
TASK(Execute formulas,FORMULASCRIPT,%FSS%)
TASK(Execute formulas,LOGICFILE,D:\BPC\Data\WebFolders\US\SV
..\AdminApp\SV\_TEST.Lgf)
TASK(Execute formulas,RUNMODE,1)
TASK(Execute formulas,LOGICMODE,1)
Edited by: ALEXANDRE BEDIER on Jun 16, 2010 3:15 PM

hello,
finally I've discovered that there is no need of BEGININFO instruction.
One can pass several functions to a logic with one FORMULASCRIPT task. The functions definitions have to be separated by instructions. See below :
PROMPT(COPYMOVEINPUT,%FTARGETS%,,"select source and target zone for category and datasource.","ACCDETAIL,ACCOUNT,CATEGORY,DATASRC,ENTITY,TIME,YEARS")
TASK(Execute formulas,FORMULASCRIPT,*FUNCTION TACCDETAIL=%ACCDETAIL_TO_SET% *FUNCTION TACCOUNT=%ACCOUNT_TO_SET% *FUNCTION TCATEGORY=%CATEGORY_TO_SET% *FUNCTION TDATASRC=%DATASRC_TO_SET% *FUNCTION TENTITY=%ENTITY_TO_SET% *FUNCTION TTIME=%TIME_TO_SET% *FUNCTION TYEARS=%YEARS_TO_SET%)
TASK(Execute formulas,USER,%USER%)
TASK(Execute formulas,APPSET,%APPSET%)
TASK(Execute formulas,APP,%APP%)
TASK(Execute formulas,SELECTION,%SELECTIONFILE%)
TASK(Execute formulas,LOGICFILE,%APPPATH%\..\AdminApp\%APP%\_TEST.LGF)
TASK(Execute formulas,RUNMODE,1)
TASK(Execute formulas,LOGICMODE,1)
Then one will be able to use the functions TACCDETAIL, TCATEGORY, TACCOUNT,... in the logic script.
Edited by: ALEXANDRE BEDIER on Jun 24, 2010 10:31 AM
Edited by: ALEXANDRE BEDIER on Jun 24, 2010 10:33 AM

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

I would like to know how do I install the brazilian keyboard into macbook air, keyboard with accents (Portuguese Language), I tried so many times how to put into it (Macbook Air). So, thanks for now! I'm waiting for it.

I would like to know how do I install the brazilian keyboard into macbook air, keyboard with accents (Portuguese Language), I tried so many times how to put into it (Macbook Air). So, thanks for now! I'm waiting for it.

After you go to system preferences/keyboard/input sources as suggested by sberman, click on the + button and scroll down to Portuguese and select that. Over at the right you will see the choices Brazilian, Brazilian abnt, Portuguese. You might want to add all three to see which you like best.
The "Brazilian" layout is pretty useless. It is identical to the US layout and the only way to make accents is via the option key shortcuts: option + n, then o gives you õ.
The Brazilian abnt and Portuguese layouts have dead keys for adding accents over at the right edge of the keyboard. But these may not match what is printed on your keys.
You may prefer to stay with the US layout. On that you can get accented letters by just holding down the base letter and selecting what you want from the popup menu that appears. Or you can use the option key shortcuts.
Another option is the layout called US International PC, which has accent deadkeys on ~, ', etc.
Which ever layout you want to use, you must select it in the "flag" menu at the top right of the screen.
To see which key does what for any layout, use the Keyboard Viewer:
http://support.apple.com/kb/PH13746

In Zoom Burst Effect Guided Edit, when i use the Add Focus Area button instead of focusing on what i choose it bring the entire photo into focus.

In Zoom Burst Effect in Guided Edit, when I use the Add Focus Area button instead of focusing on what I chose it brings the entire photo into focus.

I'd try resetting the pse 12 preferences by going to Adobe Photoshop Elements Editor (Edit)>Preferences>General
and click on Reset Preferences on next launch, then restart pse 12.

HT1518 I have a Universal Keyboard how to I insert the copywrite symbol into my photographs

Have tried but to no avail, how can I insert the Copywrite symbol into my photographs to protect them before posting online please.

Alberto Ravasio wrote:
You meant option+C
Nope. On an English keyboard you get © with option-g. Option-c gets you ç.

How can I bring the recordset count inside the same recordset?

I have a query inside a procedure where I'm paging the results.
I dont know how to bring the total results inside the recordset.
How can I bring the recordset count inside the same recordset?
SELECT *
FROM ( select a.*, rownum rnum
     FROM (SELECT
          FROM table
          ORDER BY id DESC) a
     WHERE rownum <= pg*50 )
WHERE rnum > (pg-1)*50

My query is much more comples, so that is why I'm using the other script.
When I included the "COUNT(*) OVER() tot_cnt AS total" it didn't worked:
ORA-00904: "TOT_CNT": invalid identifier
What is the tot_cnt?
SELECT *
FROM (SELECT a.*, rownum rnum
FROM (SELECT
ed_fotos.id AS COD_FOTO,
ed_fotos.arquivo AS NOM_ARQUIVO,
ed_areas.nome AS NOM_REDACAO,
COUNT(*) OVER() tot_cnt AS total
FROM edt.ed_fotos ed_fotos
INNER JOIN edt.ed_volumes ed_volumes ON ed_volumes.id = ed_fotos.volume_id
INNER JOIN edt.ed_caminhos path_alta ON path_alta.id = ed_volumes.caminho1
INNER JOIN edt.ed_caminhos path_baixa ON path_baixa.id = ed_volumes.caminho2
INNER JOIN edt.ed_areas ed_areas ON ed_areas.id = ed_fotos.redacao_id
ORDER BY id DESC) a
WHERE rownum <= 200 )
WHERE rnum >= 100

How do i bring the kuler swatches into Photoshop?

Similar Messages

Maybe you are looking for