How do I bring two texts together

Hello,
I have followed difficulty. Two Indesign documents are in front of me. Both have classifieds with three batch formats. One batch format for title of a theme (Format A), one for the headline of a classified (Format B) and a third batch format for the text of a classified (Format C).
Here a structure example in first document:
A1
B C
B C
A2
B C
A3
B C
B C
B C
B C
A4
B C
Here a structure example in second document:
A1
B C
B C
B C
B C
A3
B C
A5
B C
A6
B C
B C
B C
B C
Or so the situation is in both documents. But e.g. A2 could be a title in document 1, who isn´t in document 2, otherwise one title could have three classifieds in the first document and ten classifieds in the second document...and so on
So my wish would be to have one sorted list with the text of both documents. Alphabetical sorted in title and also in classifieds. In example as followed:
A1
B C
B C
B C
B C
B C
B C
A2
B C
A3
B C
B C
B C
B C
B C
A4
B C
A5
B C
A6
B C
B C
B C
B C
Can somebody help me? The difficulties for me is to group a classified with two batch formats for an alphabetical sort process and then get a sort list for each title area. I hope everybody understand my broken english.

Not sure if this would help but my guess is that you are trying to create something similar to a table of contents, maybe you want to check out this documented at : http://helpx.adobe.com/indesign/using/creating-table-contents.html
In case of multiple documents you can always create a book and then generate the Table of content, but you will have to maintain proper styles to achieve that.
Hope this helps!!
-Ankit Kanwara

Similar Messages

  • I would like to know how i can merge two pictures together

    I would like to know how i can emerge two pictures together, i want to use one of the pictures as a background and add an element of my other picture which will be transparent

    Good day!
    Please check out this thread:
    http://feedback.photoshop.com/photoshop_family/topics/removing_background_from_image
    Regards,
    Pfaffenbichler

  • How can I open two application together ? Ex. Calendar and reminders ?

    How can I open two application together ? Ex. Calendar and reminders ?

    When you are in one app, press the home button and open another app. You can't see more than one app at a time, but you can have as many open as memory will allow.
    To quickly switch between the apps, double-click the home button. Active apps will be shown in the order you last used them. You can slide the active bar to see more of recent apps.

  • How do I "fuse" two photos together in elements?

             I would like to "fuse" two photos together; how do I do this in elements?http://[email protected]

    Please amplify what you are trying to do.
    Do you wish to add an object from photo A to photo B, for example?

  • How do I connect two lines together.

    I have two lines at an angle but where the corner of the angle is supposed to be there is a little triangle missing. I tried joining the two lines together but when I hit join one line goes past the other.
    Before Joining:
    After Joining:

    There is no need to lock one of the paths, because you do not have to tediously select endpoints just to join paths. Doing so was necessary in Illustrator for most of its history, but it finally (decades behind other drawing programs) gained the ability to join paths at their nearest endpoints by just selecting the paths.
    Undo (or cut) the unwanted join.
    Black pointer: Select the left and right paths.
    Join.
    Alternativley, when drawing line art, it is not uncommon to set your default Graphic Style to use rounded endcaps. That negates the problem of the "missing triangle" (as you call it) appearance of coincident straight end caps.
    JET

  • How can I bind two text view elements in the same line?

    Hi all:
    In my case, it is not allowed that one text view is in the first line and another in the second line. How can I put them always in the same line?
    Thanks.

    Hi,
       as the window resizes the UIcontrols are also resized if wrapping is enabled and they will be in same row.
    as u mentioned they are two containers in root container but appears one by one do as below
    for root container
    set layout -  grid layout
    colcount - 2
    for 1st child container
    set layout -grid layout
    set colspan - 1
    as u requre 3 Ui control in it
    set colcount of child container to 3
    add the UI controls
    set the colspan of UI controls to 1.
    do as same for second container
    Thanks,
    yashpal

  • How to show images and text together in textfield or textbox.

    I want to show text and image both in text field or text box or any other container. I actually want to make an messaging application like msn message chat. Where user can add emotion along with their text messages.
    Do any one have any idea how to do this?

    I am using differnt classes i have a main calss which is a Midlet and than an other class which is a form. Now The midlet has its own form which display initial contents of the application. and than the Other Form class is called to display. But when i try to go back to midlet form The following error occur.
    java.lang.SecurityException: Application not authorized to access the restricted API
         at com.sun.midp.security.SecurityToken.checkIfPermissionAllowed(+40)
         at com.sun.midp.security.SecurityToken.checkIfPermissionAllowed(+7)
         at com.sun.midp.midletsuite.MIDletSuiteImpl.checkIfPermissionAllowed(+8)
         at com.sun.midp.midlet.MIDletState.<init>(+83)
         at javax.microedition.midlet.MIDletProxy.<init>(+5)
         at javax.microedition.midlet.MIDlet.<init>(+13)
         at com.kraysis.NokiaSMSSolution.WMAExample.<init>(+4)
         at com.kraysis.NokiaSMSSolution.ImageTextField.<init>(+13)
         at com.kraysis.NokiaSMSSolution.WMAExample$2.run(+23)
    I think When i create an object of Midlet class than it give me this error.

  • How do i tether two airports together?

    How do tether an airport extreme and an airport express together to extend my wireless network?

    Disconnect the Ethernet cable from the Express and power off the Express for now and let it rest.
    Make sure that you have downloaded and installed AirPort Utility 5.6.1 for Leopard/Snow Leopard since this will be used in the configuration of both the AirPort Extreme and AirPort Express.
    I assume that you know the name of the wireless network and the password for the AirPort Extreme wireless network, but you may not know the exact type of Wireless Security setting that it is using....and you will need that to configure and match up the settings on the AirPort Express.
    Open Macintosh HD > Applications > Utilities > AirPort Utility 5.6.1
    Click the AirPort Extreme to highlight it and then click Manual Setup at the bottom
    Click the Wireless tab located below the row of icons
    Look for the setting for Wireless Security and jot that down
    Close AirPort Utility
    With the Express still powered off, hold in the reset button on the back of the Express, and keep holding for another 9-10 seconds while you simultaneously plug the power back in to the Express. Release the reset button after the hold period and allow a full minute for the Express to restart.
    Connect the Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the AirPort Express. I assume that you have tested to make sure that the cable is working correctly.
    Open AirPort Utility 5.6.1 as above and click on the AirPort Express and then click Manual Setup
    Click the Base Station tab under the row of icons to assign a device name, device password, and adjust Time Zone settings. Your screen will look similar to this:
    Click the Wireless tab just to the right of the Base Station tab and adjust as follows:
    Wireless Mode = Create a wireless network
    Wireless Network Name = Same name as your AirPort Extreme network
    Enter a check mark in the box next to Allow this network to be extended
    Radio Mode = Automatic
    Radio Channel = Automatic
    Wireless Security = Exact same setting as the AirPort Extreme network...very important
    Wireless Password = Same password as the AirPort Extreme network
    Verify Password
    Settings will look similar to this:
    Click the Internet icon
    Click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click Update and allow a minute for the Express to restart to a green light
    Power off the entire network....all devices....in any order you want
    Wait a minute
    Start the modem first and let it run a minute
    Start the AirPort Exteme next for a minute
    Start the AirPort Express next for a minute
    Keep starting devices one at a time the same way until everything is powered back up
    You are in business now

  • How do I put two songs together to one?

    ?????????

    The surest way would be to burn the two songs to CD. Then reinsert the CD and let iTunes pick it up. Next, select the two tracks. From the Advanced menu, select "Join Tracks". Then set the album name and artest. Now, import the CD. One file should have been generated.
    If you don't have CD burner and the files are MP3s, there is a handy little program called MP3 Joiner. I used it to combine multiple CDs (one MP3 file per CD) into fewer files. I've computer a 29 CD audiobook into four files with the length of 9+ horus each.
    Hope this helps,
    Steven

  • How to pair two Ipads together

    How do I pair two Ipads together?  I have two in my classroom and do not want to have to download the apps for each Ipad?

    You cannot.
    Barry

  • How to stitch two photos together as panorama

    how do I stitch two photos together to form a panorama?

    Best way I can think of is to know the dimensions of the two photos, start a PS Touch project that's roughly the additive width of those two photos (e.g. If both photos are about 1000 pixels across, start with a project of about 2000 pixels wide or more), then place each photo on its own layer using the "add image" button (2nd icon from the upper left).
    Use the "transform" icon (5th icon from the upper right) to change a layer's size, position, etc. Adjust one layer's transparency while you place them together. Put it back to 100% opacity when done.
    When making a panorama, remember to have an overlapping point (usually about 20 to 30%) between the two photos. This makes it easier to stitch.

  • How can I have two fields with the same name if it makes sense?

    Hello, folks :)
    I have a pretty hard time figuring out how I can have two text fields with the same binding name.
    The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
    I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
    How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
    Thanks for your replies :)
    P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
    One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

    I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

  • Is there a fax cover template?  If not, how can I have 2 text fields on one line?

    Is there a fax cover template?  If not, how do you add two text fields on one line?    

    No fax cover template. This forum posts explains how to put multiple fields on one line:
    http://forums.adobe.com/message/5032849

  • How do you link 2 text boxes in new pages

    How do you link two text boxes in the new pages.  The old one was much easier to use.

    I think this is impossible! Ive been trying today and I couldnt do it. Then I opened up an old document that had text linking in it and I got a message telling me that the text boxes were now unlinked!  Why would you remove that? For me this software is now useless. How on earth do I get my old version back?
    <Edited by Host>

  • When importing songs of a same album but different artist iTunes will separate the artists. How can I bring all together in the same album?

    When importing songs of a same album but different artist iTunes will separate the artists. How can I bring all together in the same album?

    Generally setting a common Album Artist will fix things. For deeper problems see Grouping tracks into albums.
    tt2

Maybe you are looking for