How do I bring up groups in Address book. I manage a distribution list but can't bring it up in my address book?

I manage a email distribution list. Usually, I drag the group to the address bar then expand the group for group emails. I have 160 prople in this group.
I lead a group of bicycle riders on weekly rides. I add or subtract email addresses to this group weekly.
When I go to address book,I can only see individual names or my contact list.
Please help?

I can get to Groups by clicking the red ribbon at the top that has a silhouette of 2 people or by using the option on the View menu:
Regards,
Colin R.

Similar Messages

  • TS1389 can't get into Itunes from my desktop icon.  itunes is listed in my programs list but can't bring it up

    two problems this morning.  I can't get into itunes from my desktop icon.  previously I've not been able to download a book to my ipod nano.  it shows in the audiobooks menue and in "purchased" but can't download.  Help  thanks,

    Hey Gingernut03,
    Welcome to Apple Support Communities! So it sounds like the same type of thing is happening to both iTunes and iCloud. Check out the following iTunes article and see if that resolves the issue with both services:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Have a great day,
    David

  • I can't seem to get rid of OR use Adobe Reader after I let it into Safari 7.  How do I get to the point where Reader is not my preferred anything, but can still be used if Preview won't open something?

    I can't seem to get rid of OR use Adobe Reader after I let it into Safari 7.  How do I get to the point where Reader is not my preferred anything, but can still be used if Preview won't open something?

    Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
    Step 1
    If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
    Step 2
    There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
    Step 3
    If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
              Safari ▹ Preferences... ▹ Security
    and check the box marked
              Allow Plug-ins
    Then click
              Manage Website Settings...
    and make any required changes to the security settings for the Adobe PDF plugin.
    Step 4
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
              Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
    Step 5
    The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
    Step 6
    Do as in Step 4 with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

  • I've just got a new computer does any one know how to transfer my song to my new computer. I've installed itunes but can't seem to transfer the songs

    I've just got a new computer does any one know how to transfer my song to my new computer. I've installed itunes but can't seem to transfer the songs.

    you can use home sharing.
    or, assuming you have all your media files in the default location, copy the entire iTunes folder (not just the iTunes music or media folder) from the old to the exact same location on the new machine.
    you can either use your network or an external HD for that.

  • Just wondering if anyone has a problem with accessing iTunes store. have iTunes installed but can't bring up the store home page?

    Just wondering if anyone has a problem with accessing iTunes store. have iTunes installed but can't bring up the store home page?

    i have the same problem! Safari won't work either. Can anyone help please? I have completely restored my computer trying to fix this and it still won't work! I have a 2 month old alienware laptop running windows 7

  • How to create a security group to manage a Distribution list in exchange 2013

    Hi folks,
    We have AD synced with Online Exchange 2013. Dirsync is installed on AD. We would like to create a security group for a Distribution list(for instance: distribution list name is [email protected] and it is managed via a security group named "abc" ).
    How can this be achieved? I do see an option under Online Exchange console using browser-> Groups to create a new security group but it doesn't allow me to add the group created in AD-instead it ask us to create a new one. If we create a new one in Exchange
    online console- will it publish to our local AD?

    Hi TR,
    Thank you for your question.
    Are there any errors when we could not add group which is in local AD.
    When we could not add group which was created In AD, there are following options we could check:
    If current user who logon Exchange server has enough permission to add it
    The connection between Exchange server and AD
    If we create a new DG in Exchange online, it will be published to local AD.
    We could run the following command to create DG for abc.com:
    New-DistributionGroup -Name "abc" -Alias abc -Type "Security" -MemberJoinRestriction open
    We could refer to the following link to learn more about distribution group:
    https://technet.microsoft.com/en-us/library/bb124513%28v=exchg.150%29.aspx
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • HT4847 How do I unlock my ipad. It Wants me to back up icloud but can't get rid of message to try

    My ipad is showing a message that advises icloud has not been backed up for 2 weeks and the ipad needs to be plugged in and charging to enable back up. However, I can't get rid of the message so that I can turn on wi-fi and start back up. This has happened to me before and I ended up having to pay a one off fee of £25.00 for advice to clear the message that was quick to do. Can't remember how to do it though. Does anyone know how to unfreeze the screen please? I have tried holding the wake up button but that just brings up the swipe to power off screen, which does not react to a swipe. Please help.

    Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.  This just restarts it, you won't lose any data by doing this.

  • How does everyone manage Email Distribution Lists in E-Business Suite

    We have heaps of email distribution lists stored in Oracle Ebusiness Suite, excel, access ..you name it!
    I would like to use a standard method for tagging contacts in the CRM Sales and Marketing Online so our employees can run reports to create external mailing lists.
    Today we use classification codes to do this. Have also thought about using a descriptive flex field and report on that to create a contact list with name and email addresses.
    Anybody have a better idea for how to achieve this in Oracle Marketing/Sales Online?
    Ideally, we would like to create a customer facing website so people could subscribe/unsubscribe from email lists and have it fully integrated 'plugged in' to the above solution.

    Thanks Ravi for your response.
    No, no such kind of reasons.
    Indeed I can send successfully to a simple email address but not to the distribution list ...
    The problem is right there, in the fact that there is a ditribution list but I really don't know what's the problem ...
    Have you ever use a distribution list? Any special thing to do with it?
    A'll appreciate any help.
    Regards

  • On a mac, coded a simple HTML page, but can't bring it up in firefox, it simply brings up the code instead of translating it to a web page.

    I have made a very simple HTML page in text editor on my mac. I'm trying to view what the page would look like in firefox, but it just brings up the code, rather than the webpage, even though the extension in the address bar says .html.

    Are you opening that file locally or have you uploaded the file to a server on the internet?
    Can you post a link if you have uploaded the file?

  • How do I insert the SIM card in the I phone 6 I have managed to open it but can not get it back in

    How do I insert SIM card in i phone 6 I have used the key and taken draw out but can not get sim back in

    Probably doesn't have anything you haven't already tried (i.e., push) Remove the SIM card from your iPhone or iPad - Apple Support

  • HT5312 How do I reset my security questions? I've been trying for hours, but can't find out how to.

    I can't remember my security questions, but I have to enter them in order to download new content on my iPod 5. I've been looking on iTunes support, but it hasn't been much help. I need a way to reset my security questions through email. 

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

  • I need to get into my old account and get my addresses and then cancel the old account but can not get into it. Had to change my user name when I moved and now I can't get into Firefox. Can't remember the old password. What to do??

    I moved during the summer. I changed to highspeedand & when I set my computer up it told me that my email address was already in use so I had to change it(????) I changed from jkady to [email protected] I tried to change it on firefox but it would not except the new name and I could not get into my old account.I need all my addresses and would like to cancel the old account but I can not get into it. This is very frustrating!!!!! I need my addresses!!!!!!!!

    I logged in changed the primary E-Mail address to a different one, vertified it then tried to log in it said either to send an E-Mail to veritify again or to do my security questions, so I choose to do the security questions and put in my Birthday like it asked and it said that it was wrong and I had to authenticate it to get in, why is it so hard to just set up a Apple ID really though!
    So I tried the E-Mail to and it has not sent me an E-Mail then I tried to log in again and it has locked me out of my account so I try to recover my password and it gave me the same options to get my password back and both options are doing the same as before, it says I don't know my on birth date or it is wrong or needs authenticate it, then the E-Mail doesn't come through!
    This is just stupid now.

  • IPhoto shows as Open but Can't bring Program Up

    Hello,
    I recently transferred a several hundred photos from my Microsoft PC to my iMac. Now, when I open iPhoto, the program opens; however, the photo window doesn't appear when I click on the iPhoto icon. In other words, all I get is the menu file bar that runs across the top of the computer. If I hit the Expose button, I can see the photo window with the photos, but if I click on it with the blue lines around the outside highlighted, nothing happens--the photo window will not open.
    Any ideas how to get my photo window with all photos up?
    Thanks.
    lsb

    Try this basic fix: trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    *What's the plist file?*
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
    Regards
    TD

  • Created my own menu bar - but can't "BRING TO FRONT"

    I am wanting to put a photo behind my "menu bar" that I created for my site - however, whenever I try to slide a photo behind it - the menu will not "bring to front" - all other text and images will - but for some reason at the top of the page is different? I feel like there's a lot of "auto formatting" going on in my site as well - anyway to turn that off?
    Thanks -

    It's all about z-index: http://www.w3.org/TR/CSS21/zindex.html
    iWeb page has four layers: nav layer, header layer, body layer and footer layer.
    Look at your age source and you'll find the following z-index:
    nav = 0
    header = 10
    body = 5
    footer = 15.
    The scenario is that you created your "menu bar" in nav layer, then added a photo in either header or body layer and slide it into the nav layer, but the photo isn't really inside nav layer - it straddles between nav layer and the other layer.
    When that happen you will not be able to bring your "menu bar" to front because the photo is always in front of nav layer.
    You need to turn on view layout (Shift Command L) to see the layout and move the photo *completely inside nav layer*
    or move your menu bar to body layer and add the photo to body layer, in short both the menu bar and the photo have to be in the same layer.

  • My question is How to do old 4S to new 5 S to save same into phone but can not do ask someone last night and did not help me as I am deaf and not clear and Please man told me download from computer and I am not understand at all

    Yesterday We went to At and T store and they told me to download from old phone to new phone and I am really upset and I got Icloud and prove but part of still in 4S and has not go in 5S and that is biggest problem and no commuication that woman stay follow what she said but still not working so I do not know what else to do my do not understand and I would like to have someone do for us and AT and T store can not do that part so Told me Apple store and I called last night talk to some one on Apple store but told me that no go back to AT and T store so now total confuse and I am not get anywhere so and why they will not do it so therefore I do not think computer that not clear for us because we have no experince in computer program for this so both are deaf and not clear so over 50 years age and so we need face someone to do for us and told us do our self which is total upset us more so because my twins are in Orlando and can not call them because of problem contiunes in heart so I need someone who we can trust and help us. I do have IPAD mini and almost lost my calls to my twins and today I think get back but not 100 % so I am kind upset and who email us or I will have to go Apple Store and see if they know personal.

    Open this support document http://support.apple.com/kb/HT2109 print it from the computer and follow the steps there. You need to backup your data from the first device and then restore that to the new device.

Maybe you are looking for

  • Flex 4 Beta 2 and Halo Panels

    Hi all. I'm banging my head against a wall here, and wondered if someone else could help me out! I'm working on a project which utilises a 3rd party open source control based on Halo Panels. It would take quite a bit of time to re-write this control

  • IP Report not input enabled

    Hi Experts, I have done the below activities to make an IP report for manual planning. 1)Creation of real time cube and made is available for planning by setting. 2)Created aggregation level on around 7Characteristics & 4Key figures. 3)Created a Bex

  • DB 11g unzip fails

    Hi, I downloaded DB 11g (win32_11gR1_database.zip) from the Oracle download page and now the unzipping fails. I get "invalid format" error both with PowerArchiver and WinRAR. I downloaded three times, always the same issue. I saw some other posts wit

  • Slide shows and music

    can you only choose to play music from a playlist when you play a slideshow and not pick from the library

  • Bulk insert returns ORA-02291

    When bulk inserting with BindArrayOfStruct when a row fails with ORA-02291 all remaining valid rows fail with the same error. If the invalid row is removed from the array the other rows are inserted. If a row fails with another error all remaining ro