How do I burn a dvd using the PAL setting for Europe?

This is an older answer:
Make a new project in PAL using custom settings. Copy and paste the contents from the NTSC project to the PAL project. Render everything.
Don't do this unless you really need to. If you're making a DVD for Europe you don't need to.
And my question is:
Why is it not needed to change it to PAL if this DVD is for Europe?
Would it not be best to use a project with PAL SD 720x576 DV Anamorphic 25i ?
What's the difference between .... x756 DV and ... DV Anamorphic
and also completely without this DV and DV Anamorphic?

Level 10(109,395 points)Tom WolskyJan 9, 2015 5:22 PM
Re: How do I burn a dvd using the PAL setting?in response to Totti 10Why is it not needed to change it to PAL if this DVD is for Europe?
You don't, unless you want to have PAL resolution. Would it not be best to use a project with PAL SD 720x576 DV Anamorphic 25i ?
Yes, if you want a PAL resolution DVD. That's why the OP is asking how to make a PAL project. What's the difference between .... x756 DV and ... DV Anamorphic
DV is 4:3. DV Anamorphic is 16:9. and also completely without this DV and DV Anamorphic?
Not sure what this means. The DVD specification is the same as DV resolution. If the OP as an HD project that has a frame rate of 23.98, the output resolution will be NTSC DV anamorphic, because DVD only accepts 23.98, 24, or 29.97 frame rates in 720x480, not in the PAL resolution 720x576. That has to be in 25fps.
Like Show 0 Likes(0)
Reply
JUst to add the reason you don't need to make PAL for Europe is because all PAL DVDs can play back NTSC. Unfortunately almost no NTSC players can play back PAL.

Similar Messages

How do i burn a dvd using final cut pro x

how do i burn a dvd using final cut pro x?

Use the Share button at the far right end of the Toolbar or File>Share>DVD.

HT5630 how do I burn a dvd using usb superdrive to mac or itunes?

How do I burn my dvds onto either my Macbook air or onto itunes using external USB superdrive please??

"Burn my DVD" refers to the process of taking data FROM the Macbook and copying them TO the DVD, not potentially the other way around, as you have asked the question.
Are you wanting to copy (rip) movies from a DVD and place them into iTunes?
-or-
Are you wanting to copy (burn) a movie from a digital copy on your computer to the DVD?
The way you have asked the question makes no sense.

How do I get Mozilla to use the page name for the actual bookmark name instead of the URL when I bookmark a page

I just noticed this (in comparison to Internet Explorer): In IE, when you favorite a webpage, it uses the actual name of the webpage (for example, for this page, it would be "Ask a Question Firefox Help" as the bookmark name), but in Mozilla it uses the URL address as the bookmark name. I was wondering if it was at all possible to change my Mozilla settings in order to make it use the webpage name as the bookmark name instead of the URL address? I hope everyone understands what I'm getting at? If anyone can help me, I would really appreciate it. Thanks.

Does this happen with each bookmark?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can try to check and repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

How do i burn to dvd when the format is avi

please help

Can you give a few details - avi is not a format, it is a container for video:
http://en.wikipedia.org/wiki/Audio_Video_Interleave
Now, if you want to burn a movie - no matter the format - you will need to use iMovie and/or iPhoto and/or iDVD to render the footage so it can be played on any DVD player. If the original format is such that it can't be read by the softwares I mentioned, you may need something like MPEG Streamclip to convert it first.

How do I burn a dvd of the slideshow I made in Premiere Pro CC?! My head may explode..

Slide show is done, ready to go. How in the world do I burn it?! Thank you in advance and for saving me from starting a riot in my house. LOL

You will either need to download Encore:
Encore CS6 not installed with Creative Cloud
or another authoring program and export to Mpeg2 -DVD.

How do you burn a playlist using the new version of itunes if no provision is made unlike previous versions. have thaey ( Programmers made a mistake)

Downloaded latest version of itunes. Noticed that there is no provision to burn a playlist to CD under the file menu as in past versions. Although the help menu still references this function. Is this an oversight ?
Also noticed that the new itune program which interfaces with the iphone 5 , will only play videos bought through itune store. Where previous versions would play any video, or have I got wrong??
Any help would be appreciated .
Thanks
Oldsalt 94

Someone gave me the Mac Format magazine (Jan 2013), which contained a complete guide to iTunes 11.
One section was "Get the old look back". It stated that it was possible to tweak the interface to get the old look back by:-
1. Be on Music view and select Songs tab at top of window.
2. Click on the View menu. (Mine was hidden, but if you click on the dropdown arrow in the top left-hand corner the option is there to show the Menu Bar).
3. Click on Show Sidebar, then click on Show Status Bar.
This should make iTunes look like the old version.
Hope this helps others :-)
Slightly happier Apple!

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

How to identify which applicarion is using the DVD burner?

How to identify which applicarion is using the DVD burner? Ot is not allow me to burn the DVDs genetrated in the Final Cut 7

I think you'll find that the application is Final Cut Pro... the message is bug. I get a similar message when disconnecting external drives after using them with FCP (even when the project is no longer loaded.)
As I mentioned above, the accepted workflow is to export the sequence to one of your hard drives using the Export>QuickTime Movie path with Settings:Current Settings and Make Movie Self-Contained checked like this:
This gets you a high quality "master copy" which you open in Compressor for transcoding. You should use the DVD: Best Quality setting for the duration of your movie.
this gets you the high quality MPEG-2 and AC-3 files for DVD Studio Pro authoring.
If you've never used DVD Studio Pro before, you can use iDVD instead. For iDVD, you just drag and drop your "master" on iDVD and it takes it from there. Both make a very professional product.
hope this helps.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.

The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20) into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
Thank you again for your help and wisdom.

How can i burn an event to a dvd using the shattered slideshow effect

Does any one know how to burn an event using the slidshow shattered effect on to a dvd or how do you creat that shattered effect in IDVD?

While in the slideshow mode use the Share ➙ iDVD menu option.
OT

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels?

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels? I have read other forums on burning HD DVD's but I do not see the option to turn the 8 pi into 40 pi the one forum recommended. I want my DVD to be HD so I may sell these videos online for my business. I can't sell them the low quality they are burning now. Hopefully you can help me. Thanks.

desalvom
Thank you for your reply.
You cannot burn your high resolution video that you can view on your computer to an AVCHD on DVD disc
that will replay through a regular DVD player. But players are marketed under a variety of names with
different support opportunities. One manufacturer may call its product MultiMedia Player, media player, Blu-ray player,
etc.The bottom line is the specifications for each of the players that are candidates for the playback of
the AVCHD format on DVD disc or the format of interest.
If you upload your HD (1920 x 1080) video to YouTube, YouTube converts the video to flash format, but it goes up as the HD video.
But, beware. Look at the YouTube viewing setting when your uploaded video is playing back. The YouTube default is not
HD. It might be 360p, 480p. If you have a 1080p video, then before the YouTube playback, you should be looking
at the video with the YouTube 1080p HD setting for best viewing. That is a YouTube matter.
Best results depend on you
a. setting up the Premiere Elements project preset to match the properties of the source media. That means, if
you have 1080p source, you (manually) or the project (automatically) set the project preset at
NTSC
DSLR
1080p
DSLR [email protected]
or the PAL counterpart, depending on your region need.
b. if you upload your video to YouTube using the Premiere Elements feature, there is a HD preset, but you cannot
customize it.....if you need customization, then you can export your Timeline to a file...in this example
Publish+Share
Computer
AVCHD
with Presets = MP4 H.264 1920 x 1080p30 or PAL counterpart
and then customize the preset under the Advanced Button/Video Tab of that preset. In increase quality, you might look to increase
the Bitrate under Advanced Button/Video Tab settings - without compromising the file size.
Then you would upload that file to YouTube at the YouTube web site.
All of the above are factors that need looking into in order to determine the why for what you wrote
I have published a shortened advertisement video to YouTube- say 5 minutes-
and it is low quality
Often SD video upscaled to HD can present poorly. But, you are dealing with a HD workflow so that should not be introduced into the matter. The setup of the project and
the properties of the source video are important, but let us start with the above and rule in or out those considerations first.
Thank you. As always, any clarification needed, please do not hesitate to ask.
ATR

What's the best method of burning CD/DVD using MBP?

As per my title, what is the best method of burning CD/DVD using my MBP? Can I use iDVD, disk utility etc? I'm referring to burning stuff like music, photos, doc etc. I used Toast Titanium (shd be version 6) with my iBook G4 but it doesn't seem to work with MBP after data migration. Guess the version is too old and not supported in Snow Leopard. Is there any upgrade for Toast Titanium and how much would it cost?

Hi tanvivien,
The best method is really going to depend on what you're burning. All of the iLife applications (iPhoto, iDVD, iMovie, etc.) make it pretty easy to burn with the click of a couple of buttons via the "Share" menu drop down.
You can use Finder for files/data as well as media but if it's multimedia then usually the programs where they're managed or stored is easier.
Information on Toast and how to upgrade would be found here - http://www.roxio.com/enu/products/toast/titanium/overview.html

Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards

In v.11, how do I burn a DVD to full-screen? I tell it to, but the program keeps burning to widescreen.

In V.11, how do I burn a DVD to full-screen? I have told it to, but it keeps burning to widescreen.

Rodney
Great news. Great job sorting through the details.
The core of your issue went to the differences between Premiere Elements 9 and 11 and its default project presets and how project preset is set.
Some of the factors are found
http://www.atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html
Add to the mix, that the project preset directs the program to make certain settings (assumptions). So, if you have a HD project preset, you are going to see NTSC_Widescreen_Dolby DVD set as the default in the burn dialog. I am guessing that you were letting the project control setting the Premiere Elements 11 project preset, and it was giving you its default NTSC AVCHD Full HD1080i30 instead of NTSC DV Standard.
But the ground rules are
a. know the properties of your source media
b. set the project preset to match the properties of the source media (if the project does not do it right, then you set the project preset manually)
c. keep the export settings consistent with the other project settings.
I will spare you the rest of the details for now. Just know, please do not hesitate to ask if you have questions or need clarification.
Thanks.
ATR

How do I burn a dvd using the PAL setting for Europe?

Similar Messages

Maybe you are looking for