How do I cancel a print job from my computer to my HP Photosmart 7510. Touchscreen is unavailable.

HP Photosmart 7510 All-in-One CQ877a Model C3112; Operating system Windows Vista 64-bit.
Can't find how to easily cancel a print job. The touch screen is unavailable during the printing process (just shows the HP icon spinning around during the print process). There isn't a "cancel" button or touch area to cancel. We're wasting ink and paper by not being able to cancel jobs easily. Read the 24-page manual and it doesn't mention it. Looked on line for an answer, can't seem to locate one. Can always go to Start, Printers, and select the printer and then cancel from within there, but by then, the job is finished.

There should be a cancel button (X) on the printer. Check out the pic below taken from page 7 of the User manual for your printer:
http://goo.gl/mW7Fy
Alternately, instead of going the Start button route, did you check out the Final tip at the bottom of the article?
"Final Tip (Shortcut)
Before using the method above to open the print queue, look for the printer icon in the notification area. If you see it, double-click it to bring up the print queue. "
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Similar Messages

How do I send a printing job from a remote location to my photosmart 5514 printer

I have given my photosmart 5514 printer an email address. I can print successfully using the wireless network in my house. What more do I need to do to have it accept printing jobs from my iPone or laptop when I am in another remote location?

Hi,
You can send an email (including attachment) to its email address and it will print. Please note: it only supports the following format:
    Microsoft Word
    Microsoft PowerPoint
    Microsoft Excel (HP strongly recommends that you preview documents in Excel before printing)
    Text files (.txt)
    PDF
    HTML
    Images (bmp, jpg, png, gif, tiff)
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I cancel a print job

How do I cancel a print job

Are you referring to cancelling print jobs from a computer, or from eprintcenter? If you let me know I can give you the steps to cancel a job.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

How do I cancel a printing job half way through?

How do I cancel a printing job half way through? hp psc 1310 series
This question was solved.
View Solution.

Press the "Cancel" button on the printer. It is the button on the upper left, just below the power button. See page 2 of the manual here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do I cancel a rman job from command line?

Hello to all,
I am having some problems with a rman job that is running via OEM-GC. I get an error message regading the SPFILE and control file being locked due to another job accessing it. I found this in the RMAN ref guide:
To determine which job is holding the conflicting enqueue:
1. After you see the first RMAN-08512: waiting for snapshot controlfile enqueue message, start a new SQL*Plus session on the target database:
% sqlplus sys/sys_pwd@prod1
2. Execute the following query to determine which job is causing the wait:
SELECT s.sid, username AS "User", program, module, action, logon_time "Logon", l.*
FROM v$session s, v$enqueue_lock l
WHERE l.sid = s.sid and l.type = 'CF' AND l.id1 = 0 and l.id2 = 2;
You should see output similar to the following (the output in this example has been truncated):
SID User Program Module Action Logon
9 SYS rman@h13 (TNS V1-V3) backup full datafile: c1 0000210 STARTED 21-JUN-99
Solution
After you have determined which job is creating the enqueue, you can do one of the following:
* Wait until the job creating the enqueue completes
* Cancel the current job and restart it once the job creating the enqueue completes
* Cancel the job creating the enqueue
So with this in mind; How do I cancel the job from RMAN command line!!!
This is my output by the way:
SID User PROGRAM MODULE ACTION Logon ADDR KADDR SID TY ID1 ID2 LMODE REQUEST CTIME BLOCK
475 SYS [email protected] (TNS V1-V3) backup full datafile 0000018 STARTED16 23-APR-09 00000023EB8D488 000000023EB8D4A8
475 CF 0 2 4 0 113123 0
Any help will be gratefully received
Thanks to all that reply

I used the following to get the spid and killed the process on the OS.
set linesize 120
col sid for 999
col username for a14 trunc
col osuser for a18 trunc
col spid for 99990
col logon_time for a12
col status for a9 trunc
col machine for a26 trunc
col running for a10 trunc
select s.sid
, s.username
, s.osuser
, s.machine
, s.status
, p.spid spid
, to_char( logon_time, 'Mon dd@hh24:mi') logon_time
, rtrim (s.module)||decode( nvl(length( rtrim(s.module)),0),0,'',' ')|| upper(s.program) running
from v$session s
, v$process p
where ( p.addr = s.paddr ) and s.type!='BACKGROUND'
and upper(s.program) not like '%CJQ0%' and s.program is not null and s.username is not null
order by s.sid;

Hoiw to remove print job from queue?

How can I remove a "print job" from the queue. Selecting "cancel all printing jobs" will not remove it. It says it is deleting, it is not doing anything.   Help please.    As long as this job is showing the printer will not print anything else.

Hi Betty,
Welcome to the HP Forum.
The job queue may be stuck.
Switch off the printer
IF you are running a notebook, first do this:
Create a Restore Point:   Create a Restore Point – Win7 OR Create a restore point Win8
Close all your programs and Shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
OR
If you are not running a notebook, just
Create a Restore Point:   Create a Restore Point – Win7 OR Create a restore point Win8
stop all your running programs,
shut down completely
Boot the computer and log in
Switch on the printer and wait until it is all back up and running.
That probably won't fix the queue, but it will clear the rest of the cobwebs.
Next, try this:
Control Panel> icon view > Administrative Tools> Services>
Click on Name to sort the column alphabetically >
Scroll down and look for Print spooler> Highlight Print Spooler>
Click Restart the service
Click the Kudos Thumbs-Up to show appreciation and say Thanks.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround to your Question!
Kind Regards,
Dragon-Fur

Cancel multiple print jobs

How do I cancel multiple print jobs with a Color LaserJet CP 4025? I've tried all of the usual solutions from control panel to turning off the power, disconnecting, etc. Nothing. There are too many print jobs to just use the cancel button. Help! Thanks.
This question was solved.
View Solution.

Hi,
Download and run HP Print and Scan Dr utility from link below
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How can i find the option to delete a recent print job from the "View Job History

1. Photosmart 5510 e-ALL-IN-ONE SERIES
2. Window 7 64 bit
How can i find the option to delete a recent print job from the "View Job History

Hello alfmswongg,
Currently there is no option to delete print jobs from the "View Job History" section of ePrintCenter.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to cancel a print job in progress

I have a HP C5580. When i was using Windows ME on my former PC, I could easily go to Printers, select the 5580, hit documents in queue, and hit cancel , and the printer stopped.
Got a new Compaq PC with Windows 7, and I can't figure out how to cancel a print job mid stream. I go to Printers and Devices, giet the page that allows me to view the print jobs in queue, I hit "print job in process", but the "Cancel" is not in bold print and I can'tfind any other way to cancel the job.
Help !

The easiest way to cancel a print job would be by pressing the cancle button on the front panel. This is the "X" button near the right side of the control panel, see pages 10 and 11 of the user manual here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HT204135 how to re print job from print queue listing on a mac?

how to re print job from print queue listing on a mac?

Hello there! Welcome to the forums @technolingua ,
I read about how you are looking to print envelopes from Mavericks. I would suggest checking out the links below to help you out!
Create envelopes by using Mail Merge
Print Envelopes (Mac)
How to Print Envelopes on a Mac
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hi, may i know how to resume the print job from HP P1102w?

I've configured the P1102W as ePrinter if there anyway to resume the printer in stead of cancel the print job when the printer out of paper?

Dear ccyee425,
Once you load the paper the print job should automatically resume if it does not unfortunately there is not an option to resume the job in the ePrintCenter. You have to send the job again.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP

How can I cancel a printing task?

I began printing a tex in a HP Photosmart Premium from my iPhone, but I realized that the text is too long (97 pages). How can I cancel this printing?

Double press the home button on the iPhone and it will reveal Print Center. You can cancel the print job there. The printer may have a red 'x' that is shown while printing. This red X will also cancel the job.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

Unable to cancel a print job

I need to cancel a print job so other things behind it will print. It still appears in the 'pending jobs' list and will not go away. It says that it is 'deleting' but it's still there. What can I do to get rid of it.? Thank you.

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter.
Browse down to the print spooler service, right click it and select Properties then click on the Stop button.
Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the job has been removed.
Regards,
DP-K

Print queue hangs up when I cancel any print job

I'm using my Photosmart All-in-One C309 printer wirelessly. It prints fine until I need to cancel a print job. As soon as I cancel any job that's currently printing (either in the software or by pressing the cancel button on the printer) the print queue hangs up and the job that I tried to cancel just sits there saying it is being deleted but it doesn't go away and it stops me printing anything else.
I've discovered a way to clear the stuck job and get the printer going again (using the Troubleshoot option under Devices and Printers) but surely I should be able to cancel a print job without jamming up the queue completely?
I've had the printer for a year now and it's always had this problem.
This question was solved.
View Solution.

Have you tried to delete and re-add the printer?
Delete the printer (select it and hit the delete key on your keyboard). Re-add it this way:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I cancel a print job from my computer to my HP Photosmart 7510. Touchscreen is unavailable.

Similar Messages

Maybe you are looking for