How do I capture 16:9 video from an s-video source (CS6)?

I work for a church and we live stream and record our services each week. Our live stream looks fine (in 16:9) but we are outputting to adobe premiere cs6 with an s-video cable. When I capture it only allows 4:3 capture and it squeezes everything. It's absolutely terrible. Can anyone help me please??  Thanks!

S-Video into Premiere?
Are you using a third-party capture card or looping through a deck?
Is the signal coming directly from a single camera or from a switcher?
Regardless, S-Video does not carry an HD signal.
Premiere alone is only capable of capturing SD or HDV video by Firewire,
and both are 4x3 aspect ratio.
16x9 HD video must be imported, not captured.
note:
If you are looping through a HDV deck for capture,
you should just go ahead and record to HDV tapes,
then capture from the deck to Premiere via Firewire.

Similar Messages

  • I have a MacBook Pro. How do I capture a still picture from a video in iMovie and print the still picture?

    I have a MacBook Pro. How do I capture a still picture from a video in iMovie and print the still picture?

    Click iMovie/About. If you have version 9.0.4 (iMovie 11) this will work. If you have an earlier version, this will also work, but there are also other ways.
    First, get an app called MPEG Streamclip, which is free. (MPEG Streamclip from Squared 5)
    Open MPEG Streamclip.
    In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
    Drag this clip into MPEG Streamclip
    In MPEG Streamclip, move the playhead to the frame you want.
    In MPEG Streamclip, click FILE/EXPORT FRAME.
    Choose JPEG, TIFF, or PNG and give it a name.
    You can then drag this photo into iPhoto.
    I have created a short video Tutorial on how to do this. There is one error in the Tutorial, where it says that Command-click is the same as right-click. I should have said Control-click instead.

  • How do you capture a still picture from DVD

    How do you capture a still picture from a DVD

    Click iMovie/About. If you have version 9.0.4 (iMovie 11) this will work. If you have an earlier version, this will also work, but there are also other ways.
    First, get an app called MPEG Streamclip, which is free. (MPEG Streamclip from Squared 5)
    Open MPEG Streamclip.
    In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
    Drag this clip into MPEG Streamclip
    In MPEG Streamclip, move the playhead to the frame you want.
    In MPEG Streamclip, click FILE/EXPORT FRAME.
    Choose JPEG, TIFF, or PNG and give it a name.
    You can then drag this photo into iPhoto.
    I have created a short video Tutorial on how to do this. There is one error in the Tutorial, where it says that Command-click is the same as right-click. I should have said Control-click instead.

  • How do I capture a still photo from my video footage??

    Probably easy I know, but just wondering how to capture a still photo from my video footage. I pulled a particular clip into my viewer window and have found the still shot I want, what next??
    Thanks in advance for any help.
    Cheers,
    Bill
    Boulder

    Put the playhead over the frame in the timeline and choose Modify>Make Freeze Frame. It will appear in the Viewer window. Drag it into the timeline.
    If you want a photo for iPhoto etc. put the playhead over the frame and select File>Export>Using QuickTime Conversion.
    In the window that opens change the "Format" setting to Still Image from the dropdown menu.

  • How to use iPhone 4 as video source...?

    I need to use iPhone 4 as video source for iMovie and FrameByFrame. http://web.mac.com/philipp.brendel/Software/FrameByFrame.html
    It's odd that Apple's products don't recognize each other.
    I can hook up several brands of old crappy camcorders without issue, but I can't use the HD video from my Apple branded device.
    Has anyone discovered a work around?

    Read the section of the User Guide on "Personal Hotspot".
    See page 24 of the following: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • In iMovie '09, how can I capture a still picture from the video?

    I have a movie that i got into iMove and I did edit it down and make a nice video from it I uploaded to YouTube. I want to know if there is any easy way to get stills from the video. when I run my cursor over the movie and get it on a person that I want to make into a still photograph is there a way to get that single piece out?
    If I locate the part of the film I want as a still then try and do a screen capture, when i move the cursor to do the capture the pic in the movie changes as I move the cursor. (hope i'm making sense).
    So is there a way to grab a single frame?
    Susan

    Two ways to get a still:
    1) In project, move cursor to the frame. Right-click/add freeze frame. The Freeze frame is placed right behind the current clip in the project.
    2) Select a frame in an Event. Right-click/Add still frame to project. The still is added to the project at the end.
    (after doing either 1 or 2, continue with step 3)
    3) Right-click on the still frame in your project. Select "Reveal in Finder". Drag the JPEG file that you see and drop it on the iPhoto icon in the Dock.
    Hint: You can create a new project just for the stills. This way you will not clutter up an existing project.

  • How can I capture a single video frame and save as an image in PS CS6 Extended?

    I have checked similar posts on this subject, but I have a problem doing this:
    I "File>Open" a video clip [.m2ts file type] into PS CS6 Extended.
    PS sets the "Pixel Aspect Ratio" for "HDV 1080/DVCPRO HD 720 (1.33)"
    PS then warns of "Pixel Aspect Ratio Correction" for preview purposes only, and that it should be turned off for maximum image quality.
    I advance the "Timeline" to the specific frame I wish to capture.
    I simply "File>SaveAs" for a JPG image - as has been suggested.
    Both the On-screen and saved images are grossly pixelated at 1440 x 1080.
    Furthermore, the saved image is an incorrect aspect ratio - regardless of how I have the "Pixel Aspect Ratio Correction" set.
    It produced a jpg image size of 1440 x 1080 at 635 KB.
    I clearly do not know what I am doing...
    Have I missed a process - either with the file type I open, or once opened in PS CS6 and set to the desired frame?
    Adobe Bridge will display each frame in a high-quality preview - which I could be happy with, but found no capture/save tool there.
    I went back to the software that came with the video camera and saved a frame image from the video clip just fine.
    It produces a jpg image size of 2304 x 1296 at 2.63 MB with the correct aspect ratio.
    After you stop laughing ... can you let me know what I really need to do to get the correct result in PS CS6?

    Place the playhead on the frame you want as a still. Then in share window choose location Save Current Frame. You can then select options such as Jpg, PNG etc.

  • How can I capture streaming online video?

    Hello,
    I may be wrong, but I don't think OSX Lion comes with any app to capture online video (youtube, etc.)
    How can I do such?

    If you don't mind a copy of a copy you can use Quciktime's video capture (but you need to go through some extra gyrations to also capture the audio that goes with the video).  Otherwise there are many flash downloaders available but the one I recommenced as the most general and full featured and also able to convert videos is Jaksta.
    And I'm obligated to say that you shouldn't download from sites unless the site's terms of use permit it.
    Here's a link to a macupdate.com search for flash downloaders.
    Possible alternative screen capture utility could iShowU.  Others of this category are shown in the Similar Software section of the iShowU download page I linked to.

  • How can I capture live HD video direct to hard drive?

    Hello,
    My goal is to be able to capture 1080p video from a camcorder direct to the hard drive of a mac. Space is a concern, so ideally this would capture directly to a Mac Mini, but if the only option is to upgrade to a Mac Pro or MacBook Pro (for Thunderbolt), I may be able to work with that. What I know about so far are the offerings from Black Magic:
    1) The H.264 pro recorder: http://www.blackmagic-design.com/products/h264prorecorder/
    2) and the Ultra Studio 3D: http://www.blackmagic-design.com/products/ultrastudio3d/
    With the first option, I'm worried about the quality. Ultra Studio 3D is very expensive ($1000) and would require upgrading to a MacBook Pro for Thunderbolt, but I'm open to that if it is the only way to get full 1080p quality.
    I also have read about an app in the Firewire SDK called DHS cap. I haven't been able to try this since the cameras I have access do not have Firewire, but if people have had success with that, then I can purchase a camera that can connect through Firewire.
    The last thing I've read about is Capture Magic HD. I would like to test this as well, but it appears the developers are out of business (their website is down), and i cannot find the software anywhere.
    Any advice about the best way to go about this would be greatly appreciated. I've been googling away and searching forums for days now.

    Really?  You've never opened up the capture window?
    Never since about CS2.
    I have had a tapeless workflow for ever... so never had reason to even take a look at the Capture Window in later versions of Premiere.

  • How can I capture/sa​ve video using a USB camera in labview?

    I'm using a USB camera and am able to get it working with the IMAQ USB Grab Example. I'm basically trying to capture the video stream displayed. How would I modify this example to do this? Thanks!

    Have you got "IMAQ AVI" sub-palette?
    Google search "site:ni.com imaq avi"
    found:
    Writing a Compressed AVI File with the IMAQ Vision Acquisition Software

  • How to screen capture a computer video game being played??

    Need a small clip of a kid playing a rather fast moving video game. Is there a way to capture that and then use it in FCP??
    Thanks
    John

    The kid capture is no problem. I have plenty of cameras and will be able to map the screen capture onto a 3d computer monitor. Only thing I did not know how to do was how to capture the video and get it into a quicktime or .avi format.
    Thanks
    John

  • How do i capture a shockwave video or swf?

    i am trying to capture a slot machine for playing on the way to work in our carpool. i have tried to look into my temp internet files and they dont work. i have tried orbit and sothink. they capture it but they dont work here is a few of the slot machines. www.megreen.com on mr green go under video slots or http://online-gambling-newz.com/articles/free-online-slots-betsoft-gaming/  try the house of fun one or rockstar. i think they have put in a code for people not to copy them.
    bnicolet

    http://www.techspot.com/vb/topic4238.html
    See this thread and i think it will help you

  • How do I capture & save a video which I've seen on a website, and is now (probably) in a temp file somewhere?

    I sometimes see a video on a website that I'd like to save. I'd expect to click on it, and hit [copy], and [paste] it in a folder. Or [Save as...], and give it a name and address. But no: no can do. Is there a utility or plug-in I need, or is there a Firefox feature I'm unaware of? I'm running Windows Vista, on a dialup, so once I download something I'd rather keep it than do it again.

    FF 3.6 would have the files in its cache folders. The version of FF4.0 that I used does not save the files in the cache folder. I was amazed to find this out. I think what we are witnessing in FF 4 is Mozilla Firefox bowing down to the big boys on the block and adding things that they want and are not thinking of us the users. The worst thing is if you watch a video or play a game and then leave the page and come back you have to wait for it to download again so you can see the video or play the game.

  • How can I capture a snapshot/screenshot from my game made with edge animate

    I am wondering if its possible to put a symbol button inside edge animate once the user clicks on it it downloads a screenshot from the current screen the user is on because it's a required inside the project I have made and the client is really asking for this advantage and I made the whole game with edge animate so please if anyone has any solutions to tell me about them..Thanks

    Hey, HeavenChains-
    We don't use canvas natively, so the html5 canvas screenshot may not work for you.  I did a quick websearch and there are libraries out there that may take a screenshot for you, but you may want to be wary due to privacy concerns with using third party software.
    Here's one of the ones I found (please don't take this as a recommendation, as I haven't tried it myself):
    http://grabz.it/api/javascript/
    Hope that helps,
    -Elaine

  • How do I capture a tv show from my dvr to my mac

    I have a mac book pro and I would like to take tv shows I have recorded on my dvr and record them to my mac. What hardware and software do I need to us?

    Google on dvr to Mac. I just did; it shows, for one thing, that different software may be needed depending on the provider. Many reads showed up after doing the Goobgle.

Maybe you are looking for