How do I capture Dolby Digtal 5.1 sound through S/PDIF

I have an Audigy 2 Value with the Digital I/O adapter device. I'm trying to capture the 5. audio from a TV show via an optical cable connected to the Digital In jack on the Digital I/O adapter. When it's plugged in I can hear the audio on my speakers, but no matter what I do I cannot record (no matter the program, no matter the setting). I noticed that the input signal is PCM Stereo. However on my TV tuner I have the ability to change the signal to AAC. When I do that the Audio Console registers the signal as "Signal Unknown" and then I cannot hear the signal on my speakers even. I have on 2 occasions been able to record audio but I have no idea how I was able to do this. Does anyone know how to record 5. audio through the S/PDIF in? Or is there a program out there that can record the raw data? I've been having a heck of a time trying to find out any information about how to do this, and am looking for a guide or program that can help. Thanks!

Are you using bit-accurate recording (Audio Console)?
jutapa

Similar Messages

  • How do I capture tape-based media to my external hard drive?  There is only one firewire 800 port on the back of my I mac.  The manual says to import tape footage directly into fcpx, but then I lose my external hard drive.   thanks for your help.

    In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive?  There is only one firewire 800 port on the back of my I mac.  The FCPX manual says to import tape footage directly into final cut, which works, but then I lose  my external hard drive    Do I  have to import it into an event, then copy it over to an external hard drive?  On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media.  How is that done?  I can only get either the camera to appear OR my external hard drive.   thanks for your help.

    Thanks for your response, but that doesn't solve the problem.  Yes, the LaCie hard drive has 2 firewire ports-
    I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
    does not appear.  It only shows up when I DIRECTLY import the footage via firewire.  ????

  • How can I capture an externally hosted page as a variable ?

    How can I capture the html or css of an externally hosted
    page and use it as a local variable ? There's plenty of options for
    doing it with local file but I can't work out how to go about it
    when the file isn't on your cf server. Any ideas ?

    Yes, of course.
    {insert the sound of slapping oneself in the head here}

  • I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts.  How do I capture all files in each account using newly purchased USB external hard drive?

    I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts.  How do I capture all files in each account using newly purchased USB external hard drive?  Thanks!

    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    Synk Pro
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • How do you Capture pages in 5.0

    How do you Capture pages in 5.0

    You can't, that entire method has been removed.
    Pages 5 is a severely cut down beta. Apple removed over 100 features and added a lot of bugs.
    Pages '09 should still be in your Applications/iWork folder.
    Peter

  • In ALV reports how can we capture separate data in 3 internal table

    HI
       In ALV reports how can we capture data in 3 Internal tables and combine them in another internal table to display........

    Hello Sudhanshu
    Another option would be to display all three itabs together which is a piece of cake using OO-based ALV lists. Please refer to thread
    Re: Alv
    for a sample report.
    Regards
      Uwe

  • How can I capture in forms the text from a database error

    In forms6i, how can I capture the text of an error during the execution of a dabatase procedure or package.
    Thanks for your help.

    You can use SQLERRM function :
    SQL> create or replace procedure procerr
      2  is
      3     n number;
      4  begin
      5     n := 1/0;
      6* end;
    SQL> /
    Procedure created.
    SQL> set serveroutput on
    SQL> declare
      2     err1    varchar2(200);
      3  begin
      4     procerr;
      5  exception
      6     when others then
      7             err1 := SQLERRM;
      8             dbms_output.put_line(err1);
      9* end;
    SQL> /
    ORA-01476: divisor is equal to zero
    PL/SQL procedure successfully completed.
    SQL>

  • How to re-capture excise duty which is issue aginst subcontract PO

    Hi,
      I have made a Subcontract PO with item category as L, with full payment of excise duty  in subcontract there are two BOM component,  then i have done  MB1B  ref. to MB1B document number excise invoice created with J1IS  for the raw materials which we have supplied,  as in case of subcontract with full payment of excise duty  there is no need to create subcontract challn now I have made the GR for finish product,   now how to capture the excise duty back when I ma trying to J1IEX capture excise  inovice ref. to GR  or PO  it is showing me only finish material in the J1IEX not the RM,  as the excise duty is on the RM only not on Finish product  in vendor PO tax is as labour chagres only.
    regards,
    zafar

    Hi
    I wan to put some basic things here
    1) when you send material to vendor with excise duty ,then vendor will take credit of that material ( your child material)
    2) After processing your child material vendor will send final material only not child material
    so how you will capture incoming excise for component which already consume by vendor?
    second thing if you received excise invoice from your vendor for final product then check that invoice you will get only Final material name and qty, there not child material with excise if am not wrong
    Regards
    kailas Ugale

  • How can  I capture a specific number of screen caps

    Using final cut or any other application, how can I capture a specific number of screen caps? Each video will have a different length.

    Bob,
    Please clarify your question. Are you asking about screen captures? If so, what software are you using and what does this have to do with FCP?
    -DH

  • How can we captured Excise Duty Payable at the time of billing

    Hi,
    i have created billing at that time i did not take excise duty payable and i have made the document and my question is and how can we captured excise payable with out reverse or manual JV,and i heard that we can do through excise table can any body tell me the procedure
    Regards,
    Harish

    Dear,
    have you created Excise Invoice? If not then you can create through J1IIN.
    Br,Vivek

  • How would you capture the stdout of Runtime.getRuntime().exec())?

    How would you capture the stdout of Runtime.getRuntime().exec())?
    Say you wanted to execute PKZIP25.exe from java using Runtime.getRuntime().exec(). How would you capture the output of PKZIP25 (the console IO) in a file so you could check the results?
    Thanks
    Bill Blalock

    Thanks.
    Could you explain a little more?
    The program I am calling seems to be executing, as far as Java is concerned, but nothing happens. I imagine I have made mistakes in calling it but can't see the output to the console.
    Should I use Runtime.getRuntime().exec() or Runtime.exec() for something like this?
    I appreciate the help!
    Bill B.

  • In v.11, how can I capture video but not audio from a camera?

    In v.11, how can I capture video but not audio from a camera?

    Rodney
    I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
    If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
    1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
    a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
    or
    b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
    Publish+Share/Computer/AVI with Presets = DV NTSC Standard
    Please let us know if any of that worked for you.
    Thank you.
    ATR

  • How do I capture good stills from video on Photoshop Elements 8?

    I'm using Photoshop Elements 8.  When I try to capture still photos from video clips, the results are not very satisfactory.  Usually the stills are very unclear, not sharp like I want them to be.  I have to make many attempts to capture a still before  I can get one that's halfway clear.   Does it have to be this way?   What can I do to get consistently clear stills from video?  Thank you!

    Fair enough, Barbara.  Thanks!
    Lewis B.
    Date: Wed, 30 Oct 2013 18:08:37 -0700
    From: [email protected]
    To: [email protected]
    Subject: How do I capture good stills from video on Photoshop Elements 8?
        Re: How do I capture good stills from video on Photoshop Elements 8?
        created by Barbara B. in Photoshop Elements - View the full discussion
    Frame from Video is  more or less a legacy feature in PSE 8. It was meant to capture a frame or two from a short homemade video at a low resolution. It doesn't do HD video at all, and isn't meant for a clip that's more than a minute or so in length. It's been dropped from the latest version because nobody has those kinds of movies anymore.
    So the bottom line is you're better off doing this with some other program than with PSE.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5802253#5802253
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5802253#5802253
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5802253#5802253. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • ALSA Mixer --how to set Capture

    Hello.  I am a newbie to Linux...using Ubuntu 12.04 for a couple of months.  I have a SoundBlaster Live Platinum card with an Live drive that allows me to input sound through AUX2.  The sound is coming out the speakers, but I cannot record from it as the CAPTURE source.  Does anyone know how to change this.  The F1 help does not discuss ALSA mixer, but addresses using Terminal (Gnome).  I'm guessing there may be a magic keystroke combo to change the capture source to whatever device is currently selecting, but nothing has worked for me yet.  Maybe it's a terminal command.  Any help would be greatly appreciated.

    Have you tried using F4 to change 'Capture' settings?
    In the top left I have (3rd line from the top):
    View: F3:[Playback] F4: Capture  F5: All
    When I press F4, it changes to
    View: F3:[Playback] F4: Capture  F5: All
    Last edited by karol (2014-02-28 16:28:09)

  • Regex question. How do I capture this pattern?

    Hi
    How do I capture pattern of strings like this:
    <TagA attr <InnerTagB attr> attr>
    Thanks!

         static private String regex = ".*?(<[^<>]*(?:<.*?>)*.*?>).*";

Maybe you are looking for