How do I cascade Mozilla windows in Windows 7 desktop
In older versions when many Firefox windows were open, the option to cascade the windows was available. On this PC with Windows 7 this option seems to have disappeared.
Also, it used to be possible to close all Firefox windows at once, and now they have to be closed one by one.
How can I restore these options?
To get more than one window...
Directly - hold Command and Option down when clicking a link on a page. The new page will open in a new window.
Using tabs - you can open a new page in a tab by holding down just the Command key while clicking a link on a page. The new page will be opened as a tab, in effect a second page for the same window you were viewing. You can switch from page to page by clicking the tabs that appear just under the Bookmarks bar.
You can then convert any particular tab to a separate window just by dragging the tab itself off to the side of the window, and releasing.
Once you have what you want in separate windows, you can arrange them to suit you.
• Move a window by grabbing it by its titlebar and dragging in any direction.
• Re-size a window by grabbing its lower right corner (there should be some faint hash marks there) and dragging. You can use that to change both the window's width and its height.
Similar Messages
-
When I tried to load picture to facebook it wouldn't load. Then in the upload pop-up I noticed a block tab over the upload button. I clicked it and a Mozilla window opened with all kinds of selections I didn't understand. In an attempt to get out of it I blocked the uploader now in FB and can't figure out how to make Mozilla unblock it.
That was probably an Adblock Plus "block tab" that you clicked.
Open ABP prefs and look at the top section of the Filter Rule section > My Ad Blocking Rules = right-click the rule that you just set and use '''Delete'''. -
how do i stop two windows from openning when i click on an email link, the home page and the link both open. i just want the link to open
That is a bug, so you need to wait until this get fixed.
See https://bugzilla.mozilla.org/show_bug.cgi?id=531552 - Firefox 3.6b opens two windows when opening external links
(please do not comment in bug reports) -
How to delete cookies in windows 7
You give information about how to delete cookies in windows XP and the button 'extra' I can't find the button 'extra' in my version of windows 7
There is no difference on Windows 7.
"Remove Cookies":
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies
* https://support.mozilla.com/kb/Deleting+cookies -
How to delete cookies in Windows 7 - info on website is only for xp.
there is no info on how to delete cookies on windows 7. Please provide method.
There is no difference on Windows 7.
"Remove Cookies":
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies
* https://support.mozilla.com/kb/Deleting+cookies -
I have switched from PC to Mac how do i use my windows version of adobe photoshop CS3 on my MAC?
i have switched from PC to Mac how do i use my windows version of adobe photoshop CS3 on my MAC?
rebel1568,
All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC. You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
CS3 is totally out of the upgrade or cross-grade loop. You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
Curt Y is correct in that CS2 will not run on current Mac-Intel machines. You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
Of course, you could run your Windows on your Mac if you installed and ran BootCamp or Parallells. -
How to use Two main windows with in a page in script ?
Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.HI..,
u need to go for <b>SPLITTING THE MAIN WINDOW</b> !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose <b>Edit --> Main windows</b>.
A dialog box appears.
-->Enter values in the fields <b>Area width</b> and A<b>rea height</b> in accordance with the input guidelines for main windows.
-->Enter values in the fields <b>Spacing</b> and Number in the <b>Horizontal group</b> if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the <b>Horizontal and Vertical groups</b>.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:
<b>
Left margin of current column + Window width + Horizontal spacing = Left margin of next column</b>
In label printing, the field Upper margin also varies from main window to main window:
<b>
Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window</b>
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh -
Hi all,
I created a timer which detects inactivity in the first form launched by the forms runtime shortcut :
when-new-form-instance :
declare
hWind NUMBER;
CheckTimer TIMER;
begin
hWind := get_window_property(FORMS_MDI_WINDOW,WINDOW_HANDLE);
Win_API_Session.Timeout_Start_Timer(hWind);
CheckTimer := Create_Timer('T_INACTIVITY',10000);
end;
And in the when-timer-expired of the same form :
if upper(get_application_property(TIMER_NAME)) = 'T_INACTIVITY' then
if Win_API_Session.Timeout_get_inactive_time >= 8 then
set_window_property(:system.event_window,title,'Deconnected');
end if;
end if;
My problem is that when I click on a menu item in my menu, and I do nothing during 10 seconds then only the first form's window is titled 'Deconnected' but not the current form .
I have copied the trigger when-timer-expired of the first form to the form I called but there is nothing.
So how to make all the windows , whether it is the active window or it is hidden , to be titled 'Deconnected' when the timer expires ?
Thank you very much indeed.execute a system process that will output this data and read/parse the output
[notice a pattern?] -
How to change the default window size display font size on Lync 2013 main window?
Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
I am trying to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?
CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
directly for serial number issues. -
Whenever i have a mozilla browser on and i try to open another mozilla window browser it work pull up a new window. When close the browser that was on, it will still show up on Task Manager. Whats going on with this?
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/ -
How can i reopen all windows from last session on safari 6?
how can i reopen all windows from last session on safari 6?
finally found it .... sorry ...
Response:
System Preferences > General
Uncheck "Close windows when quitting an application"
Close
Ensure you have empty the Homepage on Safari
Safari > Preferences
Homepage = emptyOr... from the Safari menu bar click History > Reopen All Windows from Last Session
-
I have to send an error report every time I close a Mozilla window or shut down Mozilla. then I have to restart Mozilla to get back to the page I was on.
Do you have any Norton products installed?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes -
How to use Different Main Windows in Multiple pages to print internal table
Hi experts,
I have a problem regarding how to have multiple different main windows in smartforms..the problem is that i want to print an internal table in the third page of the smartform and that table can have dynamic values ..sometime it may have more than 400 values also which can not be printed in one or two pages ...
so to accomplish the same what i did was..
i tried creating a new main window in the third page but it is throwing an error saying two main windows not allowed and i also tried by copying the first page's main window but it is just repeating the same content what was there in second page..
i also tried by creating a secondary window in the third page and in that window i tried giving my internal table and tried by giving the next page to itself but that also is not allowed and it throws an error saying a page without a main window cannot point to itself as a next page....
i also tried using a secondary window and in that window i was trying to display the internal table but it is only showing third page content and fourth page itself was not created....although in my next page field value of the third page , i have given the third page itself as a next page ....but this also is not working ,.....
please suggest how to have different main windows(not copy of first main window) in smartforms in order to display the dynamic contents of an internal tableHI ,
Just check with your smart styles with assigned paragraph allignment .
Try to create character style with your required font ,size and Allignment .
Hope u this will solve your issue .
Let me know if any concerns......
Regards,
Lokesh -
How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?
Sorry - confusing - My question has NOT been solved yet - can anyone help?
Maybe you are looking for
-
Connecting a Dell monitor to macbook...
I have a Dell monitor that's just lying around in my room. I want to use it as a "second display" for my macbook. I realized that I can't just plug it in because the cable doesn't match. I've been trying to find the appropriate cable for it, but I'm
-
Do I need to update Bootcamp 3.3 after upgrading from Snow Leopard to Mountain Lion?
Do I need to update Bootcamp 3.3 after upgrading directly from Snow Leopard to Mountain Lion? If so, what is the recommended version for my machine? Other pros and cons we should consider? Not sure what is considered best practice. We have a mid-2011
-
Installment plan - Plans are scheduled and not paid , extend to other cust.
Hi Masters, Please clarify and suggest on Installment plan. We have query in Auto industry , where the customer buys the vehicle on installment basis ,and the installment plan is for 2 years . The customer pays regularly for 1 year and after an year
-
You know, I spent most the night re-formatting my document, but I've run into a small problem. I don't know if my poor computer isn't running the program fast enough even though I close windows and erase un-needed files but using word 13 the document
-
Change font style on iphone????
I have the new iOS 7 update (love it by the way) but I was curios if you could change the font style in your iphone in your settings or maybe even downloading an app???? If anybody knows anything please let me know:)