How do I center a block both vertically and horizontally?

I just figure out that if you set the left and right margins
to auto, the
block will centre horizontally in the viewport, but how do I
do it for the
top and bottom?
Thank you for your help,
Ricardo

http://www.apptools.com/examples/tableheight.php
Shane H
[email protected]
http://www.avenuedesigners.com
"Ricardo" <[email protected]> wrote in message
news:e38h53$afl$[email protected]..
>I just figure out that if you set the left and right
margins to auto, the
>block will centre horizontally in the viewport, but how
do I do it for the
>top and bottom?
>
> Thank you for your help,
> Ricardo
>

Similar Messages

Center all vertically and horizontally?

I'm trying to self-publish a book using CreatSpace on Amazon. They want an extra 1/8" around all margins of a 6x9" book (actually more on the width) to allow for bleed. I have to generate a PDF. When I changed the page size it kept the type in the same spot, and made the pages jump back and forth a little in the PDF. It would be good if they stayed in the same place. How can I center ALL the artwork -- including the headers on the master page -- both vertically and horizontally to fill a particular page size? Thanks for any advice.

There may be a bit of miscommunication going on. You should be designing with the final trimmed page size in mind, and if you have images or solids that need to bleed, they need to extend beyond the trim size. When output to PDF, you specify whether to include crops and bleeds, and the size of the crop marks and bleed area. For example, if you want something like this crappy example I just knocked off:
You would set up your page size at 6x9 and place the images like this:
…and when output to PDF with the marks of your choice:
…you get something like this:
…which results in a PDF whose size is 6.83x9.83, but when trimmed will be 6x9. If you measure from the crop marks, the size is 6x9, and if you measure from the bleed marks, the size is 6.25x9.25, which is the trim size with 1/8" bleeds on all sides. Ask the publisher what marks they would like. They may not want bleed guides or color bars, so just give them what they want.

Word document pdf printing with vertical and horizontal pages

I have a Word document that has both vertical and horizontal formatted pages. When I print to PDF, the I get a new pdf file whenever a page orientation change is found. pages 1 to 7 are vertical, 8 to 12 are horizontal and 13 to 20 are vertical again. If I print to a file named "out_to_PDF" I get 3 files named "out_to_PDF", "out_to_PDF2" and "out_to_PDF3", the first one with pages 1 to 7, the second one with pages 8 to 12 and the third one with the remaining pages. Is there a way to get only one file with all the pages?
I know I can merge the files later. This file with 20 pages is no problem. I have several 70+ page docs, with multiple changes between horizontal and vertical that will result in 20 or more separate pdf files.
Any pointers?

Word renders print jobs that change the orientation as separate print jobs. So, each print job becomes its own PDF.
You can make an Automator workflow to combine PDFs. I’m not sure how it decides the order it combines them, so you’d have to experiment.
This is built as an Application where you’d drop all of the PDFs onto the App icon and it will open the combined PDF where you can edit, name, and save.

Center vertically and horizontally with a single layout?

verticalLayout has the horizontalAlign property, and horizontalLayout has the verticalAlign property. How can you use a particular layout to determine the flow of the children, but also specify vertical and horizontal alignment? In Flex 3 this was as simple as <VBox verticalAlign="middle" horizontalAlign="center">...

Take a look at http://forums.adobe.com/thread/448063
If you don't want to use extra containers then you could use Spacer components.
For example to align vertically in the center:
<s:VGroup width="200" height="200" horizontalAlign="center>
<mx:Spacer height="100%" />
<s:Button label="center aligned" />
<mx:Spacer height="100%" />
</s:VGroup>
Or at the bottom:
<s:VGroup width="200" height="200" horizontalAlign="center>
<mx:Spacer height="100%" />
<s:Button label="center aligned" />
</s:VGroup>

How to create the Business System both sender and receiver in SAP XI / PI

Dear All
kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
Regards
Blue

Hi,
If by any chance you are not able to find these....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
Regds,
Pinangshuk.

Center text in text field - vertically and horizontally

Hi to all,
I have a text field with a specific size (for example 10x10 cm) I need this size because all the fields in the report must have this minimum size and they just can grow vertically (expand).
But i need to put the text centered in the field, vertically and horizontally. just in the middle whatever the size of the box.
The parameter "Center" in justify text doesn't help. Only adjust horizontally.
Thanks in advance.
Filipe Almeida

Hello,
If you want to center vertically, you have to use an anchor .
Regards

How do you change categories in both transactions and budget report in the personal budget template in Numbers?

How do you change categories in both transactions and budget report in the personal budget template in Numbers?
I am working on both an iPad mini and a MacBook Air.
Whenever I change the category name in the budget report, it does not actually show up in the transactions tab when I am using the Personal Budget Template.
I have already tried copying and pasting a category in the budget report to add another row but it still does not show up in the transactions tab.

Hi golmeda,
Check out this answer here:
Using Numbers Personal Budget template I can't figure out how to change the categories in both tabs (budget and transact…
If it is unclear let me know.
quinn

Quick Look PDF with vertical and horizontal pages

Is there any way to make Quick Look preview a PDF file with vertical and horizontal pages without adding white padding and retaining the aspect ratio?
Now, if I have a PDF with page 1 vertical and the other pages horizontal QL shows the latter also with the ratio of a vertical page and adds white padding at their top and bottom. You get the inverse output if the first page is horizontally oriented, but the rest are vertical.

Word renders print jobs that change the orientation as separate print jobs. So, each print job becomes its own PDF.
You can make an Automator workflow to combine PDFs. I’m not sure how it decides the order it combines them, so you’d have to experiment.
This is built as an Application where you’d drop all of the PDFs onto the App icon and it will open the combined PDF where you can edit, name, and save.

Why are some of my pages centering themselves (vertically and horizontally) after I select the "Shrink document to avoid overwriting..." option under Add Headers and Footers?

I'm working in Adobe Acrobat X Pro. I added header and footers through Adobe. I needed to select the "Shrink document to avoid overwriting the document's text and graphics" feature under the "Appearance Options..." option within the "Add Header and Footer" window. Some of the pages in my document that only had a few lines of text on them centered themselves (vertically and horizontally). How can I prevent that from happening?

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

HP LaserJet 5500dtn print quality issues: vertical and horizontal streaks

Hi,
I am getting large vertical yellow streaks, accompanied by cyan and magenta vertical dashes on each print. Also, each page has vertical and horizontal black streaks. I've cleaned the fuser and that hasn't made much of a difference. I've also tried cleaning some of the cartridges, which didn't help. The internal roller of each cartridge continues to get covered with excess toner. Furthermore, I get a weird offset of some of the text (a faded version of the text that is offset about 1.5" from the regular text). Is there anyway to fix this issue by cleaning certain parts? Any other suggestions? Thanks

Hi,
Yes it is in Warranty. It is virtually brand new.
After I last posted I got through to the online chat support and was sent an email with options to 'troubleshoot' which I had already done with no success.
I was also given a link to try to update the printer firmware - which I will try when I get home from work.
I will see if that makes any difference but am sceptical as the printer worked fine the first time round but hasn't worked since and nothing has changed on it.
Chris.

Iphone 5 rotates between vertical and horizontal modes, but does not flip vertically.

New Iphone 5 rotates between vertical and horizontal modes, but does not flip vertically.
Tried restarting, checked the lock, gyroscope.

Hey Oprion,
Thanks for the question and congrats on your new iPhone 5c. The orientation of your iPhone will depend on the application you are using. For example, most of the built in applications only support the three main orientations (Horizontal, Vertical, Horizontal), whereas the Voice Memo’s application will operate “upside down” for easier access to the microphone.
Change the screen orientation - iPhone
http://help.apple.com/iphone/7/#/iph3badf94ec
Thanks,
Matt M.

How to display axis labels on both x and y-axis of a column chart

hi,
i have an urgent requirement of having axis labels on both x and y axis
In x-axis i got it by sorting order also but in y-axis i'm unable to do
i need in y-axis ,my column values are L1,L2,L3,----L10these shuold display in y-axis in sorting order and 0 in axis should remain as it is ..........how to take the interval ....? as of now i'm using Auto
my y-axis values shud look like 0,L1,L2,L3,L4,----L10can anyone get perfect solution
thanx in advance
lucky

Hi Lucky,
Per my understanding that you want to display the values(Column1) like "L1,L2,L3....L10" which comes from the "Series group" in the Y-Axis label and keep the row group in "Category group" to
display in the x-axis and Numric column(1,2,3,4) in the "Value", right?
Gernerally the lable display in the y-axis is automatically based on the value of the Numric column in the "Value" and it default is numbric labels.
I have tested on my local environment and in your scenario, i suggest to hide the axis lable of the y-axis and create an tablix to only show the one column contains the values (L1,L2,L3,L3) to display in the place of the hidden y-axis label.
Detais information about to design an new y-axis label ae below for your reference:
Create an tablix to display only the row group of the "Column1" ( for the
Column1 may have duplicate values, you can create parent row group for this column and hide the detail column by setting the "Column Visibility").
Right click the y-axis to select the "Vertical Axis Properties" and select the "Labels" on the left pane to check the "Hide Axis labels"
Select the Chart Area and in the properties set value of left=0 under the CustomPosition:
Set the border style=None for both the Chart and Column1's row group
Drag the tablix at the position near the hidden y-axis and set the size of both the chart and the tablix to make the value in the tablix row group(Column1) to be align with the y-axis label:
Right click the "Chart legend" to delete or hide the legend
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to handle BP who is both Customer and Vendor during history import?

Hi Forum,
This is for importing Financial transactions for Open Sales Orders, Open Sales Invoices, Open Purchase Orders and Open Purchase Invoices and also for importing history for all Closed Sales Orders, Invoices, Purchase Orders and Invoices.
Our prospect has in their current system Business Partners who are both Customers and Suppliers (Vendors). In SAP Business ONE, BP is unique. It is recommended I believe in situation where BP is both Customer and Vendor, we need to create two BP Ids.
Question?
How do we import open and history of invoices in this situation where the same BP is both Customer and Vendor? Any tips would help please.
Thank you all very much.

Hi Syed,
As Gordon and Rahul said, it is painful for you if you import closed transactions.
Try to compromise your client that to use the old system for last year/old reports.
Its always good practice to import the Opening balance and even the open documents only.
If you have partially open items, then import the document for open quantities only.
Let's say, if you have a sale order with an item of 100 Qty. Among that 100 qty, lets 20 qty has been already delivered then you have to create the sale order in SAP for remaining 80 qty only.
Regards,
Bala

How can i get sound on BOTH imac and apple tv

The sound works fine on the apple tv Television but goes off on the iMac
Video works on both, so How do I get sound on Both when mirroring?

Go to Settings > Messages > Receive At. Use the same Apple ID. Make sure the phone numbers/email addresses you want to receive messages at are checked.

How to do IDOC debugging for both inbound and outbound

Hi
can somebody please help me on how to debug the idoc both inbound and outbound in SAP PI.
Regards
Blue

Hi,
Yes, i have checked but did not get any satisfactory answer.
here is the solution:
Inbound:
We19, Give the idoc #,
click on the inbound functional module and select the radio button in the fore ground
check the check box call in debug mode, this will enter in the functional module debugging.
Outbound:
Check BD73, give the idoc # and execute
or
RSNASTED program and set the breakpoint there
is this correct, i have not tested/ checked yet.
Regards
Blue

How do I center a block both vertically and horizontally?

Similar Messages

Maybe you are looking for