How do I center a title over selected columns?

I was a heavy Excel user and am very confused by Numbers. If I have five columns and I want a title over those five columns, how do I center a title over just those five columns?

Hi Laura,
Following on from quinn's advice:
Some people are tempted to merge cells in similar situations. Don't do it! Numbers finds mysterious ways to complain about them.
Instead of merging cells, try a text box on top of your table. Set the Fill colour to match the row, and set Border to No Border:
Regards,
Ian.

Similar Messages

How do I put a title over a photo?

I've seen a lot of posts about putting a title over a video clip, but what I want to do is put a title over a photo. I am able to insert titles just fine and same thing with just photos, but I can't seem to combine them. When I try to drag one on top of the other, it moves to the left or right and creates two seperate things. I have made sure that the length and duration of each is the same and also that I leave the "Over Black" box unchecked. Any suggestions?

What do you mean by it 'creates two separate things'? In iMovie 5, I don't think there was an 'add' button. You have to drag the title 'T' box down to the photo in the timeline. IF you are having problems wiht this, try deleting the iMovie plist and the reopen iMovie and try again. (The plist is in YourUserName->Library->Preferences->com.apple.iMovieplist. Trash that and relaunch iMovie.
Post back if that does not help.

How do you center a title's anchor point?

I'm sure this is a simple question but I can't find anything in the forums that answer it.
I have a text title I want to center in the frame (horizontally and vertically, with text center aligned), but for some reason the guides seem to be wrong. The yellow lines don't meet at the center of the frame, they meet at another point that seems to change randomly. And the round handle (anchor point?) of the text box appears on the first line of text, rather than the vertical center of the text box. How do I reset this or change it? It says my anchor points are at x 0 y 0, but that doesn't look right. All I want to do is center all my text boxes (both horizontally and vertically) within the frame. I hope this makes sense. Please see images. Thanks!

Are you sure that your settings in Video Inspector - Transform - Position x = 0, y = 0 and not something else?
I don't think you can set the move handle to be other than under the first line.
Geoff.

How to show/hide total based on selected column in column selector

Hello,
Is there a way to show/hide the total based on what column is selected in the column selector? Or alternatively to hide the total based on the column selected? I'm using OBIEE 10g.
Basically, I have a pivot table with a handful of row variables and one measure. Then I allow the user to select the column variable. The default is to have nothing, which I have achieved using the hidden/dummy column trick (Re: How to add new columns by using Multiselect However, if my pivot table is set to have a total, I now get 2 columns that are the same. When the user selects any other choice (e.g. gender), I would want to see Male, Female and the total. Something like this:
Default:
Count
East 10
West 20
Total 30
Gender:
Male Female Total
Count Count Count
East 6 4 10
West 14 6 20
Total 20 10 30
Any thoughts?
Thanks!

I recommend using view selector instead of column selector

How to add the values of all selected columns in a table and display it ?

Hi all,
I am using jdeveloper 11.1.1.6.0
Page:
my page jsff page contains one ADF table and one textbox
DB:
i have two database tables A & B ,
i need 2 columns from each table . say (A.product_no ,A.product_name,B.prodeuct_price ,B.confirm)
here product_no is primary key and present in both tables.
i need to create a VO combining these two tables and put it as ADF table in a jspx page
Functionality :
my 'confirm' field is a checkbox field in table . whenever the checkbox is selected,
the corresponding price will be getting added and display it in a textbox.
Eg:
if my first 4 price values are 3000 , 2000 ,4000,2000
and if i select first 3 values , then the text box should contain 9000 value.
i need help ...
Problem:
i need help in creating VO and functionality part

Hi,
it is easy: create an entity object for every table and one view object where you select your both entity objects and join them in your select statement.
Your desired 'confirm' functionality could be achieved with helpp of view object transient attributes - for more information see: http://docs.oracle.com/cd/E21764_01/web.1111/b31974/bcquerying.htm#CHDHJHBI
Regards
Pavol

Creating a title over video

hello all,
I'm a new user to final cut express hd, and I'm just curious, how does one add a title over a video file, as well as just a title in general

The help menu could get you started here with detailed instructions. Go to the Generators button, the little A in the lower right of the viewer. There are a number of text tools there. The Boris tools like Title 3D will give you the most control.

Title over a picture in imovie hd!!!

i need a quick answer, how would i put my title over a still photo in imovie 06, and how do i import photos? i'm more used to 08

yep, though it always seems like i have to trick it into doing what i want it to do.

Is it possible for text to span over two column?

Gurus,
I have a two column document and my Chapter/Book title has to be place center on page over the two column and the paragraph underneath is to be place in each column, i want to used only one text frame for all the text, can i span the Chapter title over the column or just make another frame?

You can create frames anywhere you want. I usually do that -- move the 2 column frame down and insert a new frame at the top. You can connect the top frame with the rest, so the text runs through it (and you can see when and where text reflows), or you can simply let it exist as a stand-alone frame. In both cases you have to move the frame if you have a major text reflow.
A cunning trick that might work for you is to insert a table instead. The table (one row, one column) can be dragged wider than its containing text frame. You will have to move down the text in the right hand side column manually, though.
More control over columns is definitively on my wish list! In ye olde WordPerfect 4.0 (about 1984) one could switch columns on and off at will, anywhere on a page ...

How to create a title over the top of the left-most column in a cross-tab.

This is one of those things that seems simple until you try it.
I'm almost there. I moved the cross-tab from the report header to the report footer so I can have a page title. I tried using an overlay but it didn't work for any page past the first.
I can't seem to figure out how to put a title over the left-most column though.
Thanks in advance,
J

I have used a text box, after you type in the text, select the box, and move it to the front.
then select the crosstab and move it to the back.

How can i set a Title to Parameters(Selection-Screen)?

Hi,
i have a Selection-Screen with two Parameters. Both Parameters should be have an Title.
But how can I set a Title two this Parameters? Is there existing any options????
For example, the Parameters "I_WRBTR" and "I_NBDOCS" needs two Title´s.
Every Parameter must have a title, but how can I realize this???
*I have know only a title for "IWRBTR" but i need also a title for "I_NBDOCS"*_.
DATA: FIELD_BUKRS(10).
SELECTION-SCREEN BEGIN OF SCREEN 0100.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
     SELECT-OPTIONS SEL_BUKR FOR FIELD_BUKRS OBLIGATORY.
     SELECTION-SCREEN BEGIN OF LINE, COMMENT (25) text-005 FOR FIELD IWRBTR_, POSITION 33.
         PARAMETERS: I_WRBTR(10),
                                  I_NBDOCS(3).
     SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN END OF SCREEN 0100.
Thanks for Helps.
ETN

Hi,
try this short example:
DATA: FIELD_BUKRS(10).
SELECTION-SCREEN BEGIN OF BLOCK BLOCK WITH FRAME TITLE T_BLOCK.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK1 WITH FRAME TITLE T_BLOCK1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (29) T_SEL_BU.
SELECT-OPTIONS SEL_BUKR FOR FIELD_BUKRS OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BLOCK1.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK2 WITH FRAME TITLE T_BLOCK2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (32) T_WRBTR.
PARAMETERS: I_WRBTR(10).
SELECTION-SCREEN COMMENT 50(15) T_NBDOCS.
PARAMETERS: I_NBDOCS(3).
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BLOCK2.
SELECTION-SCREEN END OF BLOCK BLOCK.
INITIALIZATION.
T_BLOCK = 'parameter'.
T_BLOCK1 = '1. parameter'.
T_BLOCK2 = '2. parameter'.
T_SEL_BU = 'Buchungskreis'.
T_WRBTR = 'Parameter wrbtr'.
T_NBDOCS = 'Parameter nbdocs'.
Regards, Dieter

How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center? I can select 2 page view and cover page in 2 page view, but the dotted line shows up. Thank you!!

How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center? I can select 2 page view and cover page in 2 page view, but the dotted line shows up. Thank you!!

Hi skt102711,
I would like to inform you that acrobat doesn't support .epub to .pdf format conversion. Please browse this Link for more information : Supported file formats | Acrobat, Reader
Regards,
Rahul

When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it

When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it?

The issue is that your credit or debit card credentials must be associated with the same country where you reside in order to purchase iTunes content.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

How to Get the Job, Cost center, Position description using select query

Hi all,
How to get the Job, Cost center, Position description through select query without using the Function module?
thanks,
Prasad

use adhoq query and take the report chose both text and value

How to hide bounding box over selected parts in 3d annotation?

Please let me know if it is possible to hide bounding box over selected parts in 3d annotation?

Have you unchecked the Display Bounding Box in the Options menu on the left side of the Model Tree toolbar? Select the down arrow next to the menu icon under Model Tree to see the Options menu.

How do I change the title of an "episode"?

Hello,
I'm writing a screenplay but when I print out various reports or build my schedule I'm getting a column called "episode". The episode is titled as a very old version of my script and not the current title of my script.
Any ideas how to change the "episode" title? Or…can I just remove it as this isn't a TV script but a film screenplay?
Any help appreciated!
Best Regards,
Ken

Hey there,
Just locate the album in iTunes and control->click on it and choose Get Info from the menu. From there head over to the Info tab and re-name the Album title to whatever you like. Then hit Ok to apply the changes.
To highlight all the songs in the album at once hold down the control key as you click on each song or you can select the first song in the album and hold down the shift key and then click the last song of the album to highlight them all.
B-rock

How do I center a title over selected columns?

Similar Messages

Maybe you are looking for