How Do I Center an Image for Printing with Elements?

Elements 9 and 11: When I select "center" in the printing que the printed image is always shifted to the left of page center.
What am I doing wrong? New computer, new printer, and Elements shifts the image to the left!!
I downloaded the Elements 11 trial version to see if that would fix the issue but it does the same thing!

My original problem:
--> 3 elements in a panel, a title image
(JLabel topImage = new JLabel(new
w ImageIcon("WelcomeTitle.jpg"));), a button,
and a bottom image. I wanted the title image at the
top, the bottom image at the bottom, and the button
in the middle. I tried this with a BorderLayout, the
top image being Border.NORTH, the bottom Border.SOUTH
and the button Border.CENTER, however the button
completely filled its panel and was really ugly.
add the button to a JPanel and add the panel to CENTER.
Cheers
DB

Similar Messages

  • Help: Resizing images for Printing with CS3

    Hello All,
      Thus far, I've done most of my printing with my Epson 3800 on paper below 8.5 x 11 which was no problem.  Now I'd like to do some larger stuff like 13 x 19 and 17 x 25.  Image size is 3504 x 2336 psd. @ 360ppi. (workflow is RAW to Adobe RGB 16-bit 8.2MP)  I'd like to maintain the 360ppi resolution, but resize to say 12 x 18 or larger and then apply final sharpening. 
      My confusion is with the up-sizing steps themselves.  I've heard it's best to increase image x% over target image size via Bicubic(?) and then to reduce x% to target size using Bicubic sharpener(?) or something to that effect.  Can someone please walk me through the process so I can get the hang of it?  Thank you!
    Mike

    MJCarnegie wrote:I've heard it's best to increase image x% over target image size via Bicubic(?) and then to reduce x% to target size using Bicubic sharpener(?) or something to that effect.
    Sounds like one of those tales from an older technology.
    Just use the resampling method as recommended in the Image size dialog

  • How can I magni9fy an image for printing?

    I wish to magnify an image in an Acrobat file and save as a stand-alone file.  I suppose I can crop and save it in masgnified form  but I don't know how to accomplish this in Acrobat XI.

    You can crop. There is no need to magnify since printing will optionally fill the page.

  • How to select the printer and select the ICC profile for printing with VBScript?

    I try to automate my printing procedure in photoshop. The problem is that I don't know how to select the printer and select the icc profile for printing with vbscript like I manually do in the print-menu in photoshop?
    Anyone has done this before?
    Thanx!
    jus

    Client/Server version:
    - D2KWUTIL.PLL library provides a 'Select Printer' dialog box to be used in Forms: WIN_API_DIALOG.SELECT_PRINTER
    http://guenter-huerkamp.dyndns.org/oracle-doc/docs/html/d2kwutil.html
    I suggest you to create a form to invoke the report, allowing user to select the printer and then pass it as parameter DESNAME

  • How do you show thumbnail images for the contacts?

    How do you show thumbnail images for the contacts on the iPod?
    -Thank You

    In another thread I posted a suggestion to try when the iPhoto app in the Application folder will not work:
    after upgrading the OS, iPhotos (and Aperture for that matter) should still be in the Applications folder...
    And running well in 10.10.3.
    If it stops running in a next "update" do not throw it away: most apps will continue running as follows:
    In the Applications folder "rightclick" (CTL+click) the iPhoto app, then "show package contents", then click the MacOs folder open: you see the real app (dark grey), rightclick this and choose "make alias", an alias is made, move this alias to the Applications folder and use it to run iPhoto.
    Same for Aperture.
    In older OS this survived several upgrades....
    Lex

  • Upsizing Images For Print Via Aperture

    Hello
    What is Aperture like for upsizing an image for printing greater than 16x11"? I need to output an image for print 36x24". Has anyone done this and if so, what were the results like? Should it be done using other third party software(Photoshop)?
    The image is full resolution from a 12MP camera.
    Thanks

    I print pretty big images (up to 60 inches by 36 inches - > 1gb) and I use Photozoom to upsize and then print in PS.
    My workflow is:-
    1. Import and basic wok in Ap
    2. Specialist work in PS - save back to Ap
    3. Export as TIF and upsize in Photozoom
    4. Save big image outside Ap (smaller, origimal image - my negative - is still in Ap)
    5. Open big image in PS - reduxe noise, sharpen etc amd print
    6. Save back to HD or delete - I always have 'negative' in Ap
    Hope it helps....
    Mac Pro 2.66, 6 Gb, XT1900, 30 ACD, iMac G5 20 inch, iBook G4, iPod 60gb   Mac OS X (10.4.10)   Changed from PC July 2005 and have never looked back!

  • When you drag a link onto your desktop, how do you change the image for the shortcut?

    When you drag a link onto your desktop, how do you change the image for the shortcut?

    Select it, hit command-i (or choose File -> Get Info), select the icon in the info window and paste something else there.

  • Custom resizing images when printing in Elements 11

    Hi friends .... I could use some help ... When I was using an older Photoshop version ...I could select "print with preview" and there I could adjust the size and proportion of the image to the paper size - I would see the paper in a preview box and could adjust the image by sliding the box at the corner points and size the image any way I wanted ... and could see the actual preview of how the image could fit on the paper .... in Elements 11 - even if I do a PDF and print in Preview- there's no way I can see to do that ... I only see options for set sizes- even under the custom sizing menu ... I'm using exactly the same printer that I used with Photoshop - so I'm assuming this is a limitation with Elements ... I don't even see the option in Elements printing to change the image percentage as I've been used to with any other page setup before .... Please give any advice - this is making printing exactly what I want pure guesswork and is very difficult for me ...there must be something I'm missing when I print with Elements 11 .... thanks for any help ...
    David

    Oh yes it has Barbara.  David is right.  Have a look at Elements 5.  I got that free and would still be using it if I hadn't had to upgraded to Windows 7.  I've now had to buy Elements 11 because Elements 5 wouldn't load and Elements 11 does not have that fascility that David laments.  I used that printing option almost exclusively for printing cards and I bitterly regret not having it now.  I'm very disappointed with these printing options in Elements 11.  The problem is that Photoshop eminates from the one country in 180 that seems manacled to its imperial measurements that the rest of the world has to keep wading through. I expect that to acquire my favourite printing fascility I shall have to get the full verson.  I have seen it in screenshots, so I know that it is there.  It's all very well for Barbara to say resize before entering the print window but this is just trial and error and takes forever.  In the meantime I shall continue to spend ages working round this cumbersome resizing problem each time I print my cards.

  • How does one transfer CS5 actions for use with CS6?

    CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS.  The "actions" folder in application support/adobe in my library is empty, and has always been so.
    Only the CS6 default actions are located in the same folder for CS6.
    I use imac i7, lion.
    Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
    Must i load each action into CS6, one at a time?
    thanks to any and all.
    vince

    Re: how does one transfer CS5 actions for use with CS6?
    On a Mac - There are multiple ways to do this.  I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
    1. You can load an action ONE AT TIME into your actions palette by:
         A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
         B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
         C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
         D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window.  I just leave it, since I keep all my actions stored in the same file.
    2. TO MOVE MULTIPLE ACTION SETS AT ONCE
         A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
         B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
         C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace.  I did this without an image open, I just dragged them onto the empty workspace.  The actions should all appear immediately in the actions palette that is open.
         D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window.  I just leave it, since I keep all my actions stored in the same file.
    I hope this helps. 
    and I hope there are no typos. 

  • How to connect my cannon mx470 series printer with bluetooth to my mini mac?

    how to connect my cannon mx470 series printer with Bluetooth to my mini mac

    Does the printer actually support BlueTooth? If the printer is wireless, then most likely it uses Wi-Fi. Did you read the user guide that came with it? Or contact Canon tech support at their website.

  • How to Restrict Single Delivery Date for PO with Multiple Line Items

    Dear Experts,
    How to Restrict Single Delivery Date for PO with Multiple Line Items.
    System needs to through Error Message if User Inputs Different Delivery Dates for PO with Multiple Line Items in ME21N Tcode.
    Can we achive this by Some Enhancement in SAP or Not ???
    If so how to do it.
    Any Inputs is highly appreciated.
    Thanks and Regards,
    Selvakumar. M

    Hi Selvakumar,
    we can resrict the PO to have a single delivery date in all the line items by means of giving a error message or overwiting the delivery date keyed/determined in the line item.
    You can use the BADI -> ME_PROCESS_PO_CUST. In which you need to implement the method PROCESS_SCHEDULE.
    (for technical aid - This method will be called for each and every PO line item, From the imporing parameter im_schedule we can get all the details of current PO line, even we can change the data in the current PO line. )
    Regards,
    Madhu.

  • How do I build an expression for a multi-element in-list?

    How do I build an expression for a multi-element in-list? For example:
    SELECT * FROM employees
    WHERE (first_name, last_name, email) IN
    (('Guy', 'Himuro', 'GHIMURO'),('Karen', 'Colmenares', 'KCOLMENA'))
    Passing a Vector to Expression.in(Vector) where each element is a Vector of values itself will result in the appropriate expression for the values clause, but how to I get the columns to be considered together, that is, how do I get the "(first_name, last_name, email)" part?
    Steve

    Steve,
    I do not believe this is currently supported in the TopLink expression framework. Your best bet at this point will be to use custom SQL.
    Doug

  • How to keep the field open for input with error message in report program

    Hi,
      Need a help in solving the below issue.
    "How to keep the field open for input with error message in report program"
    Regards,
    C.Shasiraj.

    Hi...
    you have to use the event:
    <b>AT SELECTION-SCREEN ON <FIELD> EVENT.</b>
    u have to give an error message in this event.
    Consider the following <b>Example:</b>
    <b>PARAMETERS : NUMBER TYPE I.
    AT SELECTION-SCREEN ON NUMBER.
      IF NUMBER = 10.
        MESSAGE 'Number vakue is 10' TYPE 'E'.
      ENDIF.
    START-OF-SELECTION.
      WRITE NUMBER.
    </b>
    in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
    Execute this program once u will understand....
    also Consider the following links :
    <b>Regarding events:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
    <b>Regarding messages:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    This is very useful.......
    Reward points if useful....
    Suresh....

  • Just set up lightroom 5 and imported images with sequence number but wanted image number.  How do I renumber all images in lightroom with an image number?

    How do I renumber all images in lightroom with an image number?

    Try line-height: 19px; and display: block; (as shown) on the following css seletor :
    ul.MenuBarHorizontal a {
         font-family: Lucida Sans Unicode, Lucida Grande, sans-serif;
         color: #CC6;
         text-decoration: none;
         padding-top: 10px;
         padding-right: 12px;
         padding-bottom: 10px;
         padding-left: 12px;
         line-height: 19px;
         display: block;
    Normally setting a height on a container which you have no control over is not a good idea. The text can be enlarged and that will throw everything off. The best way is to set no heights at all but use padding and make sure your background image is flexible enough to accommodate the text enlargement.
    ul.MenuBarHorizontal a {
          padding: 12px 12px;
         display: block;

  • Can I download tutorial images for Adobe Photoshop Elements 2 online?

    Can I download tutorial images for Adobe Photoshop Elements 2 online?

    I'm not sure which images your referring to, unless you mean the ones referenced in the pse 2 help under Photoshop Elements 2.0 Tutorials
    (or some that may have been available thru the pse 2 updater)
    In the folder that photoshop elements 2 installs into, there are some Samples and Tutorial folders with some of those files.
    On a windows machine look in either
    C:\Program Files (x86)\Adobe\Photoshop Elements 2
    or
    C:\Program Files\Adobe\Photoshop Elements 2
    Also, on the pse 2 install cd, there are some images in the Goodies>Stock Art folder

Maybe you are looking for