How do I center the header in document setup?

I write books and want the title of my book to appear automatically on each page and centered. When I go to Document Setup I don't find an option for centering. I shouldn't have to force with spaces my book title to the center. Where are the setup features with font style, size, center, left, right, etc?

Ok. I figured it out. The problem had to do with the fact that I started the book using an older version of Pages on my Mac Pro and sent it to myself then added it to my iPad. Once there I update, edit, add-to the story then iDisk the update so I have the most current version.
To solve the problem I went into the iPad and called up the story in Pages, copied it into memory then created a new blank document. There I went to the Page Settings and the header/footer were quite visible, including the three cells. In the header I added the title of the book. In the footer I added the Page 1 of X, hit Done and returned to the blank page. I then pasted in the entire book.
Now all are fine. The title header is centered and I have very nice page numbers.
Thanks for the tip!

Similar Messages

HT1349 how do you remove the header and footer from a document

how do you remove the header and footer from a document

It depends upon the app you are using.

I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version. How can I have the header and footer included when I open a template?

I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version. How can I have the header and footer included when I open a template?

That is becuase Pages 5.1 has numerous unnounced surprises for the unwary user. Among the surprises:
- it strips out images from headers and footers without warning
- it strips out bookmarks without wanring (yes, all those bookamrks you laboriously put into a document: poof! Gone.)
- it strips out alternating left/right margins, without warning.
There are many more suprises, as you'll see from glancing through these discussions. They fall into two main categories: things that are present in version 4.3 but that are missing in 5.1, things like
-mail merge
-meaningful Applescript/Services support
-non-contiguous text selection
-ability to set defaul zoom
-ability to see comments while editing
-ability to print comments
-ability to read RTF files
-ability to drag in hyperlinked ted from a browser
These about about 90 other features are gone.
Then there are the bugs. Hyperlinks do not reliably export to a PDF file any longer. There have been multiple problems with printing report. Some fonts place stray characters in the headers. Many reports of the program crashing, courrupting files, etc.
Fortunately for you, the previous version of Pages is still on your system. Export any documents you may have created or edited with Pages 5.1 (another great surprise: files created with version 5.1 cannot be read by any previous version of Pages: not just 4.3 but even 5.01!). Then trash 5.1 and use 4.3 until (unless?) it is stable and has a reasonably robust feature set.

How can I list the head texts or texts of position of the invoices created

hello experts
I have a consultation.
how can I list the head texts or texts of position of the invoices created in module sap SD?
Up to now I can see them visualizing the document SD for transaction VF03, but I need to see a listing of invoices and don't unite in one.
he/she would thank their collaboration.
greetings,
Jorge Silva

Dear Jorge,
You can use T-Code VF05 or VF05N to generate list of Invoices with range of selection criterias...
The concerned tables for the same are VBRK & VBRP.
Let us know should you require any further help..
Hope this helps...
Give points if useful..
Thanks,
Jignesh Mehta

How we will display the header data and item data seperately in lists

how we will display the header data and item data seperately in lists

REPORT z_alv_list_block.
TYPE-POOLS: slis. " ALV Global types
SELECTION-SCREEN :
SKIP,
BEGIN OF LINE,
COMMENT 5(27) v_1 FOR FIELD p_max. "#EC NEEDED
PARAMETERS p_max(2) TYPE n DEFAULT '02' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
1st Table
BEGIN OF gt_kna1 OCCURS 0, " Data displayed
kunnr LIKE kna1-kunnr, " Customer number
ernam LIKE kna1-ernam, " Name of Person who Created
erdat LIKE kna1-erdat, " Creation date
name1 LIKE kna1-name1, " Name 1
END OF gt_kna1,
2nd Table
BEGIN OF gt_mara OCCURS 0,
ernam LIKE mara-ernam, " Name of Person who Created
matnr LIKE mara-matnr, " Material number
ersda LIKE mara-e rsda, " Creation date
brgew LIKE mara-brgew, " Gross weight
END OF gt_mara,
3rd Table
BEGIN OF gt_vbak OCCURS 0,
vkorg LIKE vbak-vkorg, " Sales organization
kunnr LIKE vbak-kunnr, " Sold-to party
vbeln LIKE vbak-vbeln, " Sales document
netwr LIKE vbak-netwr, " Net Value of the Sales Order
waerk LIKE vbak-waerk, " SD document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
Read data
SELECT * FROM kna1
UP TO p_max ROWS
INTO CORRESPONDING FIELDS OF TABLE gt_kna1.
SELECT * FROM mara
UP TO p_max ROWS
INTO CORRESPONDING FIELDS OF TABLE gt_mara.
SELECT * FROM vbak
UP TO p_max ROWS
INTO CORRESPONDING FIELDS OF TABLE gt_vbak.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'.
PERFORM list_append TABLES gt_kna1
USING '1'
'GT_KNA1'.
PERFORM list_append TABLES gt_mara
USING '2'
'GT_MARA'.
PERFORM list_append TABLES gt_vbak
USING '3'
'GT_VBAK'.
PERFORM f_list_display.
FORM USER_COMMAND *
FORM user_command USING i_ucomm LIKE sy-ucomm
is_selfield TYPE slis_selfield. "#EC CALLED
CASE i_ucomm.
WHEN '&IC1'. " Pick
CASE is_selfield-tabname.
WHEN 'GT_MARA'.
WHEN 'GT_KNA1'.
WHEN 'GT_VBAK'.
READ TABLE gt_vbak INDEX is_selfield-tabindex.
IF sy-subrc EQ 0.
Sales order number
SET PARAMETER ID 'AUN' FIELD gt_vbak-vbeln.
Display Sales Order
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDCASE.
ENDFORM. " USER_COMMAND
----< /div>
Form list_append
FORM list_append TABLES ut_table
USING u_no TYPE char1
u_tabname TYPE slis_tabname.
Macro definition
DEFINE m_fieldcat.
ls_fieldcat-fieldname = &1.
ls_fieldcat-ref_tabname = &2.
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
ls_sort-fieldname = &1.
ls_sort-up = 'X'.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA :
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv, " Field catalog
ls_sort TYPE slis_sortinfo_alv,
lt_sort TYPE slis_t_sortinfo_alv. " Sort table
DATA:
lt_events TYPE slis_t_event,
ls_event TYPE slis_alv_event,
ls_layout TYPE slis_layout_alv.
ls_layout-group_change_edit = 'X'.
ls_layout-colwidth_optimize = 'X'.
ls_layout-zebra = 'X'.
ls_layout-detail_popup = 'X'.
ls_layout-get_selinfos = 'X'.
ls_layout-max_linesize = '200'.
CASE u_no.
WHEN '1'.
Build field catalog and sort table
m_fieldcat 'KUNNR' 'KNA1'.
m_fieldcat 'ERNAM' 'KNA1'.
m_fieldcat 'ERDAT' 'KNA1'.
m_fieldcat 'NAME1' 'KNA1'.
m_sort 'KUNNR'.
WHEN '2'.
m_fieldcat 'MATNR' 'MARA'.
m_fieldcat 'ERNAM' 'MARA'.
m_fieldcat 'ERSDA' 'MARA'.
m_fieldcat 'BRGEW' 'MARA'.
m_sort 'MATNR'.
WHEN '3'.
m_fieldcat 'VBELN' 'VBAK'.
m_fieldcat 'VKORG' 'VBAK'.
m_fieldcat 'KUNNR' 'VBAK'.
m_fieldcat 'NETWR' 'VBAK'.
m_fieldcat 'WAERK' 'VBAK'.
m_sort 'VBELN'.
ENDCASE.
IF u_no CA '13'.
MOVE 'TOP_OF_PAGE' TO ls_event-name.
CONCATENATE 'TOP_OF_PAGE' u_no INTO ls_event-form.
APPEND ls_event TO lt_events.
ELSE.
MOVE 'TOP_OF_LIST' TO ls_event-name.
CONCATENATE 'TOP_OF_LIST' u_no INTO ls_event-form.
APPEND ls_event TO lt_events.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
it_fieldcat = lt_fieldcat
is_layout = ls_layout
i_tabname = u_tabname
it_events = lt_events
it_sort = lt_sort
i_text =
TABLES
t_outtab = ut_table
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " LIST_APPEND
Form f_list_display
FORM f_list_display.
DATA ls_print TYPE slis_print_alv.
ls_print-no_print_selinfos = 'X'. " Display no selection infos
ls_print-no_print_listinfos = 'X'. " Display no listinfos
ls_print-reserve_lines = 2. " Lines reserved for end of page
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
i_interface_check = ' '
is_print = ls_print
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_LIST_DISPLAY
FORM top_of_page1 *
FORM top_of_page1. "#EC CALLED
PERFORM top_of_page.
ENDFORM.
FORM top_of_page3 *
FORM top_of_page3. "#EC CALLED
PERFORM top_of_page.
ENDFORM.
FORM top_of_page *
FORM top_of_page.
ULINE.
WRITE : sy-uname, sy-title(56) CENTERED, sy-datum.
ULINE.
ENDFORM.
FORM top_of_list2 *
FORM top_of_list2. "#EC CALLED
WRITE 'TOP OF LIST2'.
ENDFORM.
END OF PROGRAM Z_ALV_LIST_BLOCK ***********************

New ink cartridges in Photosmart C5180 but still not printing clearly. How do I clean the heads?

I changed all 5 ink cartridges on my HP C5180 Photosmart All-in-One printer, but the print is still as if I'm out of black ink. How do I clean the heads and realign them?

steelpony5555 wrote:
When your printer stops printing one or 2 of the colors it means your print head is clogged. Tech support will have you remove the print head and clean the copper contacts on the bottom, but that is not enough. Hold the head in a rag and shake it, lots of ink will come out of the inside. I saw one case where the guy held his print head under hot water till it ran clear. Not sure of the long term effects on the head if you do that. Mine has clogged twice now and it has been ink inside the head.
I would absolutely suggest not shaking the printhead. Ink is required in the printhead, and if air gets into the printhead it can cause printhead failure. See this page for an ongoing discussion.
For the C5180 this is moot, since the printhead cannot be removed to shake it in the C5180 with its permanant printhead. I would suggest three levels of printhead cleaning as described in Step 3 of this page for the c5180.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do I center the whole slide in navigator view?

New to iwork 08...how do I center the whole slide in navigator view (large pane)? The top and left edges do not show. Probably a simple answer but cannot find out how.
Thanks.
JM

See benvu's comment above. I found this thread looking for a solution to the exact same problem. Say you want to animate an object such that it appears from off-slide and ends up in a pre-defined place. You do it by using an 'action build' on the object, of type 'move'. But because the slide itself is always jammed into the upper left-hand corner of the canvas, it's extremely awkward placing the initial position off-slide to the left or top. You can do it by first placing it and animating it fully on the canvas, then move it off the canvas - but you can never grab it back afterward to reposition it.
For those of us who love Keynote because it allows us to create cinematic presentations that are more artful communication than bog-standard bullet points spinning in from space (+à la+ PowerPoint), this sort of technique is invaluable and oft-needed.
I, too, have posted a 'feature' request (or rather, a 'bug report').

I'm trying to add a header beside my logo and center the header only

I'm trying to add a header beside my logo and center the header only

Have you got a code for your master-head? If not try something like this:
HTML goes like this:
<div id="masthead">
<div id="logo">
</div>
<div id="header">
Header Goes Here </div>
</div>
Your CSS goes like this:
#masthead {
min-width: 600px;
#logo {
float: left;
width: 200px;
#header {
margin-left:200px;
text-align: center;
If this not what you want then please post a link of your work you have already done so that basic CSS code can be given to center your text.

How do i download the new B2B Document Editor tool

How do i download the new B2B Document Editor tool?

Gaja,
You can download it from otn.
It is available as part of Application Server Integration option.
The CD3 is actually the Document Editor Tool.
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
Thanks
Sundar

How do i center the text of a JLabel?

How do i center the text of a JLabel?

http://java.sun.com/j2se/1.4/docs/api/javax/swing/JLabel.html#setHorizontalTextPosition(int)

How do I enable the header to scroll?

How do I enable the header of my table to scroll with my screen as I'm inputting data in a long table. For instance, if I have a table that has 170 rows, I want to be able to see the header row as I scroll down to row 170 to input data. Is that possible in numbers. A preference maybe?

Question asked and responded MANY times.
The response is: we can't do that.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'09
Yvan KOENIG (from FRANCE mercredi 21 mai 2008 18:22:51)

TS3147 how do i change the orientation for documents in pages when printing double sided so that the document opens like a menu?

how do i change the orientation for documents in pages when printing double sided so that the document opens like a menu?
write now the document is printing so that when folded the interior of the menu is upside down.

See also this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites

In Pages '09, how do I remove the header from the first page of the document in a page layout document?

Working Pages '09, I am trying to set up a multi-page document using page layout (not a word processing document, because I'll be using lots of graphics and text boxes), with headers and footers, but no header on the first page, as this will be the title page. The layout>section pane has the 'First page is different' option greyed out (because it's a word processor only option). Help tells me that each page is it's own section in page layout, but there is no way to have one page without a header and all the others with, as far as I can tell. Am I completely missing something or is there a way around this?
Also, I want to do this again for additional chapters in the document (or else, I believe, be forced to manually start page numbering for each chapter in a new document).
Cheers.

Hi, Barry. I don't know why this solution didn't work for me :-\ Does it matter that my page numbers are in the footer and not the header? When I follow your direction, the pages do get numbered differently. My problem occurs with the last step.
1. Open the Inspector. (Check!)
2. Click the Layout button (second from left). (Check!)
3. Click Section. (Check!)
4. Make the two settings shown: (Check!)
5. Go to Page 1 and delete the contents of the Header. (When I do this, the content for all footers is deleted...)
I really appreciate your insight.

How can I see the heading of a column, whilst at the bottom of a document?

I'm doing a long list of expenses, and the headings are at the top of columns. Now I've filled in many rows, I have to go up and down the page to see the heading make sure that I fill the correct column in. Is there a way of splitting a document across the middle (or something like this) so that I can always see the heading at the top of the column even though i am way down the page?
thanks so much - Nigel

Hello
There is a really simple workaround
Duplicate your table and, in the copy, remove every rows minus row 1 thru 7.
You will be able to leave the new table (name it "header7" for instance) at the top of your screen
and put the main one just under it.
Doing that, you will be able to scroll in the main table.
If the contents of the seven top rows may be modified.
Replace the contents of the cells in header7 by a formula looking like that:
A1 =mainTable :: A1
So the changes in row 1 thru 7 in mainTable will be reported in header7.
Yvan KOENIG (from FRANCE lundi 7 janvier 2008 18:31:14)

How does BC rearrange the head section?

and how can I disable that or take control of it?
I've been trying to make my site 100% html5 compliant. One of the things I need to do is place the Charset declaration right after the <head> tag. in my code it looks like this:
<!DOCTYPE html>
<html lang="en">
    <head>
       <meta charset="utf-8" />
    <title>LegionKreativ - Contact</title>
    <link rel="icon" href="images/favicon.ico" type="image/x-icon">
    <link rel="shortcut icon" href="images/favicon.ico" type="image/x-icon" />
    <meta name="description" content="Commercial Photography Services">
    <meta name="keywords" content="Photographer, Celebrity Portraits, Advertising Photography, Magazine Photography, Corporate Photography, Commercial Photography, Portraits, Headshots, Portrait Photography, Northern NSW, Northern Rivers, Lismore, Ballina, Byron Bay, Bangalow,">
    <meta name="author" content="Steve Rehberger">
    <link rel="stylesheet" href="css/bootstrap.css" type="text/css" media="screen">
    <link rel="stylesheet" href="css/responsive.css" type="text/css" media="screen">
    <link rel="stylesheet" href="css/style.css" type="text/css" media="screen">
    <link href='http://fonts.googleapis.com/css?family=Open+Sans:400,300' rel='stylesheet' type='text/css'>
    <script type="text/javascript" src="javascripts/jquery.js"></script>
    <script type="text/javascript" src="javascripts/superfish.js"></script>
    <script type="text/javascript" src="javascripts/jquery.easing.1.3.js"></script>
    
    
    
    
    </head>
    <body>
You'll notice that <meta charset="utf-8" /> is right at the top. Yet, when I view the source of the page after it is served by bc it looks like this:
<!DOCTYPE html>
<html lang="en">

<head>
<title>LegionKreativ - Main</title>
<link href="/StyleSheets/ModuleStyleSheets.css" type="text/css" rel="StyleSheet" />
<script type="text/javascript">var jslang='EN';</script>
<link rel="icon" href="img/favicon.ico" type="image/x-icon">
<link rel="stylesheet" href="css/bootstrap.css" type="text/css" media="screen">
<link rel="stylesheet" href="css/responsive.css" type="text/css" media="screen">
<link rel="stylesheet" href="css/style.css" type="text/css" media="screen">
<link rel="stylesheet" href="css/touchTouch.css" type="text/css" media="screen">
<link rel="stylesheet" href="css/kwicks-slider.css" type="text/css" media="screen">
<link href="http://fonts.googleapis.com/css?family=Open+Sans:400,300" rel="stylesheet" type="text/css">
<script type="text/javascript" src="javascripts/jquery.js"></script>
<script type="text/javascript" src="javascripts/superfish.js"></script>
<script type="text/javascript" src="javascripts/jquery.flexslider-min.js"></script>
<script type="text/javascript" src="javascripts/jquery.kwicks-1.5.1.js"></script>
<script type="text/javascript" src="javascripts/jquery.easing.1.3.js"></script>
<script type="text/javascript" src="javascripts/jquery.cookie.js"></script>
<script type="text/javascript" src="javascripts/touchTouch.jquery.js"></script>
<script type="text/javascript">if($(window).width()>1024){document.write("<"+"script src='javascripts/jquery.preloader.js'></"+"script>");}     </script>
<script>
jQuery(window).load(function() {
$x = $(window).width();
if($x > 1024)
jQuery("#content .row").preloader();    }
     jQuery('.magnifier').touchTouch();
    jQuery('.spinner').animate({'opacity':0},1000,'easeOutCubic',function (){jQuery(this).css('display','none')});
</script>
<script>
(function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
(i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),
m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
})(window,document,'script','//www.google-analytics.com/analytics.js','ga');
ga('create', 'UA-24121241-1', 'legionkreativ.com');
ga('send', 'pageview');
</script>
<meta charset="utf-8" />
<meta name="description" content="Commercial Photography Services">
<meta name="keywords" content="Photographer, Celebrity Portraits, Advertising Photography, Magazine Photography, Corporate Photography, Commercial Photography, Portraits, Headshots, Portrait Photography, Northern NSW, Northern Rivers, Lismore, Ballina, Byron Bay, Bangalow,">
<meta name="author" content="Steve Rehberger">




</head>
All the tags have been grouped and the meta tags have been pushed down....and I simply can't find any way to take control of or change that?

You can not control the head BC sorts at the moment.
Change it to -
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
And it should stay right after the head for that bit though.

How do I center the header in document setup?

Similar Messages

Maybe you are looking for