How do I chance an image in iWeb?

I have a header image I've created and am using at the top of each page. Now that I have the site laid out, I want to replace these headers with ones specific to the page. But every time I try to drag a new image (same dimensions) over the old, it doesn't replace the image as I expect, it just plunks down a new one over the old. Which I then have to manually align it and apply the styles to.
What a pain! Especially if you're just making small changes to an image.
Is there not away to simply replace/change the jpeg on a page, with another file?

You might try this method: with the image file on the Desktop Control-click on it and select the Copy option in the contextual menu. Next go to the image in iWeb and click on it until it's selected and do a paste. It will replace the photo but I don't know if it will avoid the border/frame that the page layout adds to all photos added to the page.
OT

Similar Messages

  • How do i flatten an images in iweb?

    I created a tile image as the background for my website and then I added an overlay with a gradient. I like the effect, it looks great but when I visit my website online I notice that it loads the background image first and then the new layer moment after. This makes the site look very unprofessional.
    How do I flatten both of these images in iweb?

    You might try this method: with the image file on the Desktop Control-click on it and select the Copy option in the contextual menu. Next go to the image in iWeb and click on it until it's selected and do a paste. It will replace the photo but I don't know if it will avoid the border/frame that the page layout adds to all photos added to the page.
    OT

  • How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_1.png and I would like to put in something more relevant than just shapeimage?

    How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_2.png and I would like to put in something more relevant than just shapeimage_2?

    When you drag images from iPhoto to iWeb, iWeb retains the original filename.
    When you use a mask, iWeb creates a png file with the shapeimage name.
    So do not use a mask and crop your images before dropping them on the iWeb canvas.
    When you use an irregularly shaped mask, then png files are created. They have to be png because of the transparency of the shape.
    You can use a 3rd party application to create the png images yourself, and give them a proper name.
    Or use the published png files, rename them and drop them back onto the iWeb canvas, while first removing the previous images.

  • Is there a way of aligning the images in iweb photoalbums other than have them be a square?I have them at same height and resolution but htere is a default that shrinks them and aligns them at the bottom.Thanks.

    Is there a way of aligning the images in iweb photoalbums other than have them be a square?I have them at same height and resolution but htere is a default that shrinks them and aligns them at the bottom.Thanks.

    So how did you do it?
    by understand what iweb widgets do, in this case setting gridEntry widget's scalMode preference from fill to fit.
    then reset the displayed image, so it fits in the display area even if it's portrait aspect.
    however, i found some glitches in gridEntry widget that's quite strange... but all fix-able.
    perhaps, iweb experts (whose had poked at my example) here can chime in.

  • Images in iWeb

    I want to put images in iweb that have no backgrounds. JPGs always have a white rectangular background but my photoshop images can have transparent backgrounds leaving the object "cropped".  How can I have irregularly shapped objects cropped in iWeb?"

    Make sure your image actually has an alpha channel (transparent background)...
    Use PNG, or PSD... then drag the image into your webpage...

  • How do I chance an adress in maps?

    In the maps-app on my I-Phone is a wrong adress. I reported it already several times, but no changes...How can this wrong adress be replaced by the wright one?

    You might try this method: with the image file on the Desktop Control-click on it and select the Copy option in the contextual menu. Next go to the image in iWeb and click on it until it's selected and do a paste. It will replace the photo but I don't know if it will avoid the border/frame that the page layout adds to all photos added to the page.
    OT

  • How to load a tif image in flex

    Hi All,
    Is it possible to load a tif image in flex. If it's possible
    anyone guide me or send me some code snippets regarding how to
    display a tif image in flex.
    Regards,
    Dharma

    "flexdharma" <[email protected]> wrote in
    message
    news:ga2d96$p8h$[email protected]..
    >
    Hi All,
    > Is it possible to load a tif image in flex. If it's
    possible anyone guide
    > me or send me some code snippets regarding how to
    display a tif image in
    > flex.
    Convert it to the much more web-friendly png format.

  • I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Is it necessary to add? If so, how do I add H Tags to iweb.

    I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add?  Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!

    A simple text page like this:
    Heading
        sub heading
              text paragraph ....
    Is traditionally represented by html tags like:
    <h1>Heading</h1>
         <h2>sub heading</h2>
              <p>text paragraph ... </p>
    I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
    This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
    I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users.

  • How do I use copyprofile, image manager and create a wim file to Sysprep a reference Windows 8 computer.

    Im trying to deploy a reference machine (configured) to other machines (exact or close image) with different hardware.
    I have successfully used sysprep in out of the box, generalise, shutdown mode although i havent tried to deploy this to another device.  Unfortunately it doesnt copy the profile to default.
    I understand that I have to create an answer file using image manager based on that image, save it to a usb drive and attach this in the sysprep command line when sysprepping it.
    My problem is I dont know how to easily capture an image of windows 8 into a wim file so that i can add this into image manager to create a answer file.  Im also not sure what I have to do in image manager, is it a simple matter of creating and saving
    the answer file or do i have to configure it to copy the profile specifically (theres only one account anyhow).
    I also want to know if i have to attach the drivers or are all the standard drivers put into the sysprep image as standard.  I would like the machine to be an exactly replica, same as doing a clone (but with the drivers for the new machine installed
    so it will boot) same as doing a clone and then repair? If thats possible.
    Any specific instructions on this would be helpful.  I have read the microsft links but they are somewhat confusing.

    I know this is a very late response but I thought I'd post for others who search.
    The easiest way to create the .wim file is via WinPE, this guy's two YouTube videos explain the entire process in detail - 
    Windows 8 ADK Part 1: Capture an OS image - https://www.youtube.com/watch?v=XJ8zKX_8E9w
    Windows 8 ADK Part 2: Windows Image Deployment - https://www.youtube.com/watch?v=HHIvoqSw_FI
    Here's a quick rundown from my notes:
    WINPE
    Create WinPE via imaging tools command prompt
    copype amd64 c:\winpe
    makewinpemedia /iso "c:\winpe" "c:\winpe\winpe64.iso"
    UNATTEND
    Open Windows System Image Manager
    Configure unattend.xml
    Save unattend.xml to sysprep folder
    Create script and save it to sysprep folder to launch sysprep with unattend
    @echo off
    cd C:\Windows\System32\sysprep
    Sysprep /oob /generalize /unattend:C:\Windows\System32\sysprep\unattend.xml
    SYSPREP
    C:\Windows\System32\Sysprep
    Run as administrator
    OOBE/Generalize
    Shutdown
    CONFIGURATION of WINPE
    Set IP - netsh int ip set address "Local Area Connection" static 192.168.1.2 255.255.255.0 192.168.1.1
    Set DNS - netsh int ip set dns name = "Local Area Connection" source = static addr = 192.168.1.4 validate = no
    Map Network Name - net use z:
    \\WindowsADK\reflex\images password /USER:domain.local\username
    DISKPART
    diskpart
    list disk
    select disk zero
    list partition
    select partition 2 (OS partition #)
    Assign letter=S (assigns drive letter to partition)
    Exit
    DISM
    dism /capture-image /imagefile:z:\image.wim /capturedir:s:\ /name:"Windows 8.1 Custom"
    Verify image is saved in the image share (z:)
    http://www.microsoftfanboys.com

  • How do i make an image pause in a flash movie clip

    Please can someone help me. I am trying to find out how to pause or stop an image in a basic flash movie clip,  after it has entered from one side and before it exits the other side.
    I have been trying to work it out myself for three days but no joy. I am practicing  for a test with a training agency which gave me a disk to use but nowhere in it does it say how this is done. I am also having a lot of difficulty making stop start buttons work with this movie clip. I am using a trial cs5.5 version of Flash which expires in 7 days so i need to know this soon. I am up to speed on most of the features, its just this one thing that has me stumped. A lot of the tutorials or examples  i have found on the net are very long winded and hard to follow exactly. Could someone let me know, step by step the sequence i should follow after i have created an object  and made it go from one side of the stage to the other.

    Hi
    Thank you for getting back to me. Yes i am using a timeline tween. I have an image on my stage which moves in from one side and out the other side. I am trying to stop or pause the image. The effect i will be asked to reproduce in my exam will be something very much like the banner on the website http://www,iactweb.com. If you go to this website you will see images arrive on the banner and pause before exiting the other side. I am fairly up to speed on all the aspects of getting this effect but i have forgotten what i learned during the course on how stop or pause the images. I am using the trial cs5.5 version of flash . Thanks again for getting back to me.

  • How do I substract an image at the time t with an image at t-1 to detect move in a grab acquisition

    After the VI acquire in a grab acquisition, how do I substract an image at the time t with an image at t-1 to detect the movement in the scene?

    Hello,
    One way of doing that is to do a ring acquisition with two buffers. At anytime one of your buffers will be the most current frame and the other will be one before the most current. Having both buffers available at anytime in your code you can call IMAQ Subtract.
    Hope this helps!
    Yusuf C.
    Applications Engineering
    National Instruments

  • How to make an icon image using Photoshop

    I found out how to do this recently so I decided that I wanted to make a tut for those who don't know how to make an icon image. This icon image is for the libraries tab on your computer. Under the libararies tab there is Music, Pictures, Documents, and Photos
    First you will need the ICO (Icon image format) Format extension for photoshop which can be downloaded here:
    http://www.telegraphics.com.au/svn/icoformat/trunk/dist/README.html
    The download link and tutorial on how to install it is all in the link above.
    Once you have that all set you can now launch photoshop to create your icon image. Once you have launched it, create a new document with the size as in the image below.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/256x256_zpsbf3dcf8e.png~original[/IMG]
    Create the image you want. I used a simple one by using the custom shape tool by pressing "U" on your keyboard and with the
    basic blending options.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/IconImage_zpsd788c709.png~original[/IMG]
    The reason why the image is pixelated is because it is an icon image. Since the image is only 256x256 pixels when you zoom in on it that will get you the pixely result. The reason why I zoomed  in is so you can see it. But don't worry this is no the end result. Just continue reading and you will see.
    So once you have created the icon go ahead and press
    file>save as>(under format choose the ICO)>and choose the name that you want to name it. And save it in your C: drive. You will see why to save it in your C: drive in a sec.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/SampleicoPic_zpsd252bfba.png~original[/IMG]
    So now that you have created the icon and saved it now you can create the new library.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/NewLibrary_zps8ca703b2.png~original[/IMG]
    Name the library whatever you want I named it "Sample" for tutorial purposes. Notice how it gives you a default boring icon image for your library.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Sample1_zpsb5472840.png~original[/IMG]
    So now once you have created and named your library now it is time to get the icon image into place.
    Go to computer/c: Drive/users/YOU/ And now once you have reached this area you will need to access a hidden folder named "appdata" to do so press "Alt" then a menu bar will show. Click
    tools>folder options>and view. Find the option to view hidden folders then press apply then ok. Now we shall continue so AppData>Roaming>Microsoft>Windows>Libraries
    Now you should see all the libraries including the one you just created.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/showhiddenfolder_zpsad4a3c94.png~orig inal[/IMG]
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Libraries_zpsf6243bc0.png~original[/IMG]
    Once you have reached your destination then open a new text document with notepad and drag the library you just created in notepad. The result should look like this:
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Notepad_zps251a86f0.png~original[/IMG]
    once you have reached this point click at the end of the second to last line down then press enter and enter in this information
    <iconReference>c:\"NAME OF ICO FILE YOU CREATED IN PS".ico</iconReference>
    Example:
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/iconreference_zps1c1a3eca.png~origina l[/IMG]
    Once you have entered that information go to file>save and the icon image should appear on the library you created.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Finished_zps267f893a.png~original[/IMG]
    Now you are officially finished. Go and spread the news and joy. Bye for now
    -Dusty951512

    It is Windows only because all those screen shots are exclusively Windows, the file structure and paths do not resemble those of the Mac in the least.  As a Mac user, there's nothing I could take from your tutorial.  Sorry, 
    No drives named with letters like C: on the Mac, for instance.  No backward slashes either, ever.  No such paths either.  No "Notepad" on the Mac, we use TextEdit; but such a text editor is not remotely needed on the Mac to make and/or edit icons.  Etc.
    Those folders are not even called "Libraries" on the Mac…  Nothing resembling your tutorial at all.
    The icons in the Finder's Sidebar are not customizable at all in recent version of OS X.
    =  =  =
    You can edit any post of yours only until someone replies to it.  At this time your post is not editable by you any longer.

  • How do I copy an image from pdf file using preview?

    I've done this before from the same pdf file but can't remember how I did it.  Does anyone know?

    I tried that and heard the camera shutter go off now how do I retrieve the image?  Where is it on my computer?
    Where did you check?
    Screen shots are suppose to be saved on your desktop.  See KB Article:  http://support.apple.com/kb/PH11229
    If that is not where there are going, do a manual search.  Check inside your Download folder for starters.

  • Java Application [Java Bundler]: how I can use an image? Which path?

    Hi,
    how I can use an image in my Java Application when I create the jar bundle with Jar Bundler? Which is the path of the file? I don't know if I got it across...

    By image, do you mean an icon for your program?
    If so, then you need to create the image you want using any graphical drawing program, then use a utility such as Img2icns to put the image into the correct format (.icns). Once you have this, you can drag it into Jar Bundler and IIRC it just works.
    Bob

  • How do I spread one image across 2 pages?

    How do I spread one image across 2 pages?

    You can't with a single image, but you can "fake" it. Duplicate the image & then line up the two halves. It's easier if you are viewing facing pages two-up.

Maybe you are looking for