How do i change a color when doing color overlay?

I finally figured how to apply the color overlay and the first picture I did my son was wearing a coral shirt so I made the pic a B/W photo and wanted his shirt to pop with the color it was. So it actually worked but then I wanted to do another photo with the same idea but everything is this coral color I thought it new to make the shir that color since that is what it was. I thought that when I go to use the brusg it would pull the color of that item instead everything is coral. I didn't set it to that color and I can't figure out to change it.
Please help me. I paid a lot of money for this software and I haven't been able to do what I want.

Agree with Kirby, as always.
And I believe that the OP has changed the brushes to color overlay thinking that you need this change to erase the black and white.
Simply apply the B/W adjustment, click on the gear in the B/W brick and choose "brush black and white away." You do not have to change the brush to color overlay. That is there just to help you see where you've applied brush strokes.
Change from color overlay back to none.
Let us know how that works for you.
Also have a look at this section of the manual.

Similar Messages

On the calender. When I set a appointment date up and it puts a little dot to show the date I saved. How can I change the color of that dot ?

When I saved a date on my calendar and it puts a little dot to remind that date. How do I change the color of that dot ?

What you're describing can't be achieved using the built-in comments summary function of Acrobat, but it can certainly be done if a custom-made script it used to generate the summary because then you're in full control of what's included in it and what's not.

When creating a fillable form and saving it as a pdf, the default color of the data fields is a light blue. How do I change the color to something else that will copy better, e.g. a light yellow?

When creating a fillable form and saving it as a pdf, the default color of the data fields is a light blue. How do I change the color to something else that will copy better, e.g. a light yellow?

It's probably the fields highlight color of the application, which you can change via Edit - Preferences - Forms.

When I insert a shape, how do I change the color without changing the texture?

When I insert a shape, how do I change the color without changing the texture?

Hi,
you are working with a percentage width of your tables, for example:
table width="123%
td width="75%"
td width="25%"
So it is simply a arithmetic problem to get the proportional wide (means the ratio of % to cm) of your images, so that they do not break the frame. Certainly you could use (translated from German DW) "properties" and change the sizes there:
Hans-G.

How can I change scrollbar colors? It's hard to see the menu selection/color when scrolling through bookmarks, for example.

How can I make clearer the menu highlight selections, for example when scrolling through my bookmarks. The light blue color is hard to see in Windows 7. How do I change that color?? Running FF 3.6.6
== This happened ==
Every time Firefox opened

" Is there anyway I can define individually as to what color should be related to each text in ring menu?"
Well not with a ring and not programatically.
The best I can suggest is a picture ring, see below.
Ben
Message Edited by Ben on 11-18-2005 02:16 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Picture Ring.JPG ‏5 KB

How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)

Hello,
Here is the problematic:
1° How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)
- I've many button in a doc im creating
- the color of the buttons is white with black stoke & black text
- in roll over state i want them to inverse the color coding (the text white & bottom black)
- currently the text becomes invisible as black on black cant be seen (ive stroked it white but that looks ugly)
- i would just like to know if there is a function made for this?
My other questions:
2° Ive a presentation on which Ive created buttons which tigger pop-up animations
- i have 5 buttons which trigger animations
- the viewer can chose to Click on any of the buttons randomly
- the problem is once the animation is open how can it be close... either:
a) by it self after "40" seconds
b) when ther viewer clicks another button
3° Ive created buttons linking pages..
- "go to page xxx"
- when i do a preview and click on the buttons the links dont take me to the right pages
- is that normal? (maybe in preview its suppose to be like that)
4° I would like to intergrate YouTube videos in the presentation so they play inside the docment.. when i tried.. it said the 'link isnt a flash video'
- what should i do?
5° Once i export it into Swf. how how can i visualize it? or put it online?
Thank you for your time.

stlbbl4u wrote:
Hello,
Here is the problematic:
1° How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)
- I've many button in a doc im creating
- the color of the buttons is white with black stoke & black text
- in roll over state i want them to inverse the color coding (the text white & bottom black)
- currently the text becomes invisible as black on black cant be seen (ive stroked it white but that looks ugly)
- i would just like to know if there is a function made for this?
You should setup Object Styles - these can also include Paragarph Styles that can be triggered when the Style is selected.
http://help.adobe.com/en_US/indesign/cs/using/WS5CEDB81A-0011-4dc9-9DE8-AC7AD4C80076a.html
My other questions:
2° Ive a presentation on which Ive created buttons which tigger pop-up animations
- i have 5 buttons which trigger animations
- the viewer can chose to Click on any of the buttons randomly
- the problem is once the animation is open how can it be close... either:
a) by it self after "40" seconds
b) when ther viewer clicks another button
I'm not sure what you mean - I don't do files with Animations
3° Ive created buttons linking pages..- "go to page xxx"
- when i do a preview and click on the buttons the links dont take me to the right pages
- is that normal? (maybe in preview its suppose to be like that)
Does it work properly when you export it to the finished file?
4° I would like to intergrate YouTube videos in the presentation so they play inside the docment.. when i tried.. it said the 'link isnt a flash video'- what should i do?
InDesign won't link directly to youtube videos. I think your best bet would be to use Downloader to download the video and embed them directly in Indesign.
5° Once i export it into Swf. how how can i visualize it? or put it online?
Thank you for your time.
You can look up how to embed a SWF file into your HTML - but it depends what you mean by "online" there's a dozen ways to get a file "online".

How can I change the color of birthday calendar?

The birthday calendar in the new iPhone OS gets it color automatically. How can I change the color? It does not correspond to the color in iCal on my Mac.

I figured out a solution for changing the other calendars but not the birthday calendar. Although it's not the most direct fix, it worked for me. Apparently Apple didn't think to give us the ability to choose the calendar color. I use Entourage and sync over the air. When I upgraded to iOS 4 my calendar turned bright red and the birthday calendar was blue. I don't use the birthday calendar so it isn't even enabled in my case. What finally worked was to go through the calendar colors one at a time by disabling and re-enabling the calendar in my mail account settings. I would double click the home button to quickly switch between settings and calendar to check the color each time I enabled the calendar. I had to do this 4 or 5 times to cycle through until blue came back up.

How can I change the color of a box in book layout?

I am try to change the color of a photo box when making a book.
Will the box print? and if so how can I change the color
Thank you
Mark

The box will print... but there is no way to just assign a color to a box. The closest you can get is ot create a small solid colored image in Photoshop and assign that to the box. You may get a resolution warning but as long as it's a solid color it does not matter how few pixels you have.

Ask your question.how do you change the color of your tex bubbles.i accidently changed it from green to blue and I dont know how i did it

how do I change the color of my tex bubbles? I changed one from green to blue accidently, and I cant figure out HOW I did it!

I have a new iPhone 4 which has the latest version uploaded. My daughter just bought an iPhone 4s and when we text it's still green. We want it to be blue for iChat. What are we doing wrong? Why don't we have blue bubbles? Any help would be greatly appreciated.
Thank you
~Tammi

In working on a simple home budget, how can I change the color of a negative number to red, during the period the number is negative. Thanks,

Using Numbers spreadsheet and In working on a simple home budget, how can I change the color of a number to RED when it comes up negative. (only during the time that it's negative) Thanks, ( I hope I did this right!!)

The Inspector offers choices of format for negative numbers when you choose Number of Currency as the format for a cell. Also offered when the format is set to Automatic, IF the selected cell(s) contain number(s).
The choices are in the pop-up menu beside the box for number of decimal places.
Regards,
Barry

How do you change the color of events on ICal.

How do you changed the color of events on ICal? I was able to do this when I utilized ICal on the Snow Leopard system but can no longer do this with Lion.
I know that I can select the Calanders list, but when I create a new "Calander" it doesn't allow me to choose a color and it doesn't show up in my list when working within an event.
Thanks!

Phoebe,
Right-click on the new calendar and select "Get Info."
Make sure that the ✓ mark is selected.
Then choose the color from this pane:

How can i change the color of the graph in agreement of the program's condition

Hi,
I am using labview 5.1 in my graduation's project final. (sorry by my english, but i am ina hurry)
How can i change the color of the graph in agreement of the program's condition?
I am developing a VI to control the temperature of termistors,but i have another sensor too.
In a graph i have the situation of the termistors,but i want to change the color of the graph when the sensor is active.
Thanks a lot
Rafael Wajnsztajn - Brasil

To change the color of the line itself, you can use the attribute Plot>>Plot Color.
To change the color of the points, you can use the attribute Cursor>>Cursor Color.
To select the color, you should have a color box constant inside the Numeric>>Additional Numeric Constants palette.
This is all in LV 7.0. I'm not sure how it similar it is in 5.1.
One important thing is to place the attribute node inside a case structure which will execute only when your condition has been filled.
If this didn't help you, I suggest you post the relevant piece of code, or at least an image of it (no BMPs, please).
Try to take over the world!

HOw can i change the color of a cell

How can I change the color of a cell when it is selected. I select the cell by pressing enter, then I want the text in the cell to change color to red, but all the cells in the table change color. Please I would be grateful for some help

Subclass DefaultTableCellRenderer.
public class MyCellRenderer extends DefaultTableCellRenderer
Override
public Componet getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column)
JLabel lab = new JLabel(String)value);
lab.setOpaque(true);
return lab;
if(isSelected)
lab.setBackground(Color.red);
else
lab.setBackground(Color.white);
Set the columns in your table:
table.getCoulumModel.getColumn(0).setCellRenderer(new myCellRenderer());
table.getCoulumModel.getColumn(1).setCellRenderer(new myCellRenderer());
etc. for each column in your table.

How do I change the color of the triangle in a menu bar?

Hi,
I have a question that might seem very rudimentary...How can I change the color of the little downward-pointing triangle on my menu bar items that have sub-menus? Specifically, I want those triangles to be invisible when the cursor is not over the menu bar. Right now it is black and changes to white. I'm running Dreamweaver CS5 on a Mac if that makes any difference. Is there a CSS rule for this somewhere that I am not seeing?
Many thanks for any help!
-AG

Those are images, so you will need to change the image.

How can I change the color in this "pieces"

Hello guys, I'm new in the forum and I'm searching for help.
I'm using a free template that I downloaded from
the internet but I'm having a small problem.
When I put the logo that I want use in the template, the color is not the original one,
after some minutes trying to discover how I could change it to the original version of the logo, I found an option on "fill" with a color that I could change..
the problem is that when I change the color, all the logo changes in the same time, so I created 2 logos.. one of then only with the dark color and the other with the red color
so with this method I could change both colors on this "fill" option and all would be okai.
the problem is that both of the logos are changing in the same time.
I need to change the X to RED and the Moto to Black
Another problem that I have is : the little pieces of the logo that come all togheter, they are all black.. and i need to change it to the right color.
cause the text are in one color and the pieces are all black.

I did it, but i saw that Fill effect is a little "Shadow" behing the text... just for a small white line... I'm almost done with this intro, now I'm trying to find out how can I change the color from the X and MOTO
cause when I change the color, both changes, and this can't happen.
I need the X red and the Moto dark...
I made 2 compositions ... one with just the X X red.. and another with just Moto in dark color... but I don't know how to put this 2 compositions in 1 composition.

How do i change a color when doing color overlay?

Similar Messages

Maybe you are looking for