How do i change a user password for historical reports?

I had to change a users extension and she is not able to connect to historical reports. I keep getting an error message that her user id or password is incorrect. Checked user id which is correct and user is using the same password she used before the change. Is there a way i can reset the password the user enters to log into historical reports?

If you are not integrated with an external LDAP, you change the user's password in CUCM End User configuration; otherwise, the passwords can be managed in LDAP.

Similar Messages

How do I change the User Agent for Safari on my iPad? I need this for a specific website for work.

How do I change the user agent for Safari on my iPad? I know how to do it on my desktop version, but I need it for my iPad.

You can rename the iPad here:
Settings - General - About - Name
For Siri make sure he has himself as a contact in the Contacts app then:
Settings - General - Siri - My Info and select his contact info

IPad. How do I change my icloud password for my new iPad?

How do I change my icloud password for my new i? I have a new ipad and the account has an 8- character p/w and I only recorded 7 characters, so the present one must be wrong. I'm scared to overwrite the dots for fear I will loose it completely!

Hello, luciawong.
Thank you for visiting Apple Support Communities.
You may find this article helpful with the issue you are experiencing.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Regards,
Jason H.

How can I change the User Password expiry date

Hi,
I want to know how can I change the password expiration date of my user without changing his password. For eg:-
User password expires on 12th May 2007. I want to extend to 12th Jun 2007. Is there any option in Oracle.
Alter User <USERNAME> password expire .....<to new date>;

The command is not alter user set expire...
You should modify the user's profile, and set a timeframe:
ALTER PROFILE DEFAULT LIMIT
PASSWORD_LIFE_TIME = num_of_days;
This way your password will be valid from the last time it was changed and for the time frame previously defined.
~ Madrid.

How can I retrieve my user password for imac

Just bought an imac. My password won't work and I can't access my computer how can I change my password or retrieve the old one?

You can use your Apple ID to rest your admin password > OS X: Apple ID can be used to reset your user account password

How Can I change all User Passwords Within a Directory Instance

Hi Experts,
I've been asked to refresh an old directory instance with some production data. Easy enough I thought, however, the user has requested that all user passwords within the old directory instance are preserved. Is that at all possible? My chain of thought was that I can extract user passwords from the old instance into a file: -
# ldapsearch -D cn="Directory Manager" -w xxxxxxxx -b o=xxxxxxx objectclass=* userpassword > <name of file>
And then then use ldapmodify (or alike) to re-import the user passwords once I've refresh the old instance with the production data. However, to my knowledge, in order to modify a particular entry via a file, i'd need the following format: -
dn: gci=-1,ou=people,o=xxxxxxxx
changetype: modify
replace: userpassword
userpassword: xxxxxxxxxxxxxxxx
The only information I have in the file I created using the ldapsearch command above is as follows: -
dn: gci=-1,ou=people,o=xxxxxxxx
userpassword: xxxxxxxxxxxxxxxx
I don't want to have to edit the file and add the relevant missing entries accordingly as the generated file has somewhere in the region of 150 thousand entries.
Am I approaching this the correct way? Is there any other mean of achieving my requirement.
Thanks in Advance.

Hi,
It does not seem a big deal to add the missing lines to your output file.
For instance, the following awk command should do the trick
cat search.out
dn: gci=-1,ou=people,o=xxxxxxxx
userpassword: xxxxxxxxxxxxxxxx
cat search.out | awk '/userpassword/ {print "changetype: modify} ; print "replace: userpassword"; } {print $0}
dn: gci=-1,ou=people,o=xxxxxxxx
changetype: modify
replace: userpassword
userpassword: xxxxxxxxxxxxxxxx
Then you can use ldapmodify to apply your changes
-Sylvain

How can I retrieve a forgotten password for my home wi-fi network?

I have a wi-fi network at home for my iMac, printer, phone and two iPads. On trying to connect a new device I discovered that the password I thought was correct will not work. How can I retrieve the correct password from one of the devices already on the network? If I cannot to that, how can I change the network password for all the devices?

Hi ...
Open Keychain Access located in HD > Applications > Utilities
Select Passwords on the left.
Type Wi-Fi (or the name of your Wi-Fi network0 in the search field top right corner of the Keychain Access window.
Then right or control click that keychain then click Get Info then selec the Attributes tab then click: Show password
You may need to entier your admin password to proceed.

Change username and password for PGW2200 ..... ????????....................

Dear how i can change username and password for PGW2200?
can give the procedures?
thanks,

it is ok ....
thank you....
i have now this issue:
i need to add new E1 to be in the same trunk for previous E1 which is for Abdali. new E1 will not have signal it depeneds at old one timeslot.
i used this for new E1:
prov-add:nailedtrnk:name="1033",srcsvc="ss7p-jtc-abdali",dstsvc="naspath1-abdali",srcspan="ffff",dstspan="0",srctimeslot="33",dsttimeslot="33",spansize=31
for old one this:
prov-add:nailedtrnk:name="1002",srcsvc="ss7p-jtc-abdali",dstsvc="naspath1-abdali",srcspan="ffff",dstspan="0",srctimeslot="2",dsttimeslot="2",spansize=30
============================
at AS5400 i used to add new E1:
controller E1 7/2
framing NO-CRC4
pri-group timeslots 1-31 nfas_d primary nfas_int 1 nfas_group 0
Is this true or there are other commands i should use?
OLD E1 is configured as:
controller E1 7/0
framing NO-CRC4
channel-group 0 timeslots 1
pri-group timeslots 2-31 nfas_d primary nfas_int 0 nfas_group 0
description Connection to Abdali
interface Serial7/0:0
no ip address
encapsulation ss7
channel-id 0
interface Serial7/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-ni2c
isdn incoming-voice modem
isdn map address . plan isdn type network
isdn rlm-group 0
no isdn send-status-enquiry
isdn negotiate-bchan resend-setup
isdn bchan-number-order ascending
no cdp enable
any help please for correct commands i shall use? please see attached file for details.

Ecc6, after i've changed all the passwords for all oracle users, then how

ECC6, after i've changed all the passwords for all oracle users, now sap can't connect to oracle , then, How can i config the sap to make sure it can boot normal?
If our database is sqlserver, i've changed the database password for all database users, then, How can i config the sap?
Thanks!

My db is oracle , the oracle host name is dbserver.
The sap ap server only install the SAP. SAP host name is apserver.
Just now i've altered all the password of the oracle database db user account, Include the account "sys".
(I must alter the password.)
Now the SAP service in the host "apserver" can't boot.
Could you teach me how can i config the "apserver" to make the SAP normal boot ?
Thanks!
Best regards!

How to change Analyzer user password with Administration API?

Hi, I would like to change Analyzer user password with Administration API. Can someone post some sample commands to do the task? I would just like to write an application to change end user's Analyzer password. As I see I would need to do the following: 1. login with admin userid/password 2. execute some method to change password for required userid. I think the input parameter should be userid (of the user I would like to change password) and new password (the new password for the user). 3. logout Can someone post some sample code (commands to execute)? Thanks, grofaty My system: Analyzer Server 7.0.1. Essbase server 7.1 Windows XP SP2 

<blockquote>quote: <hr>Originally posted by: knightrich Hello Mr. Jordan. I would like to exchange some thoughts about "housekeeping" Analyzer reports in preparation for migration from Analyzer 7.0.0.0.01472 to 9.x: ... Did you solved such a problem or do you have an idea if it could be solved with the Admin API methods? ... Migration from 7.00 to 9.x: As we heard last week the "Migration Wizard for Reports" in 9.3 should be able to migrate reports. Do you have experience or more detailed information about that Wizard? Many thanks in advance knigthrich<hr></blockquote> knighrich, I'd like to be more help, but I have no experience with System 9. I did substantial cleanup when we migrated from Analyzer 6 to Analyzer 7.1, and even more cleanup when moving up to 7.2, but our installation is smaller in scale than yours and we didn't need to automate report cleanup. You might be able to get the ownership information you need through the back door, doing a direct query on the database, but simpler might be an export users, at least from 7.0. (This facility probably doesn't exist in system 9; it was dropped in 7.2 in favor of an undocumented API) The export file is an xml file that could easily be parsed to identify reports that have the administrator as user and then a second pass to delete those with otuer ownership as well. As previously suggested, you might be able to get this by a well crafted SQL query against the repository. Procedurally, we have both public reports that have the blessing of management and are widely available, owned by a "public owner", and private reports developed by indivdual users and shared or not. Our team maintains the public reports, but not the private reports. We may be asked to make a previously private report public and take over maintenance of it. I hope that you can find a solution that meets your needs. Certainly a call to customer support to identify a poorly documented feature would be in order.

When I try to update apps on my iPad, it asks me for my mothers password and displays her apple ID. How do I change it to ask for my apple id and password??? I am signed into the store and iCloud with my apple id.

When I try to update apps on my iPad, it asks me for my mothers password and displays her apple ID. How do I change it to ask for my apple id and password??? I am signed into the store and iCloud with my apple id. I am not signed into ITunes, the store on the ipad, or icloud under her name. WIERD???

There is no featured tab in my iTunes store. . . and everywhere it shows me signed in. I had downloaded an app for my mother on HER ipad, and that is the only app I have done for her. It shows up on my phone, and now I cannot update any of my apps. I uninstalled that app on my phone, but when I want to update ones I have installed on my phone with my appleid, she keeps showing up.
Joyce

How to change the sysadmin password for maintenance wizard if you have forg

How to change the sysadmin password for maintenance wizard if you have forgotten the password and can't log in.

Log into SQL*Plus as the $EOFUSER and do:
update eof_user set password = 'passwd_you_want' where user_id = 0;
commit;
-Vikki
Product and Development Manager for Maintenance Wizard

I upgraded my ipad and now my password changed. how do i get the temp password for entry ???

i upgraded my ipad software and now my password changed. how do i get the temp password for entry ???

The same thing happened to me??????

How do I change my user name and password if I can't logon to the computer?

how do I change my user name and password if I can't logon to the computer?

What Mac is this with what version of OS X?

HOw do you change the Apple Password ro several Apple devices wit the same user name?

I am trying to change the Apple password for four Apple devices, including an iPhone, iPad, iMac Air, and Desktop MAC. The iPhone password is corrupted so it is interfering with the synching of the four devices on the iCloud. I want to reset the password for all four devices and get them so they will synch with each other as well as the iCloud.

Hi Stew,
App Store requires 10.6.8, is the 10.5.5 you kist correct?
Antway, to change ID...
http://support.apple.com/kb/ht5621

How do i change a user password for historical reports?

Similar Messages

Maybe you are looking for