How do I change all transistions in a project?

I've set auto transistions for a project as disolve, and would like to change all of them to cube.
Is there a way I can do this?
Thanks for any help or feedback.
Jim

Many thanks for the helpful answer. I'll try that and see how it works.
On the same subject, after disabling "auto transactions" to do this, is there a way to reestablish auto transactions after changing the number I want to change, but still not being finished with my project?
Thanks,
Jim

Similar Messages

How can I change all of (or more than one) speaker note to a voice at once?

Hello...
I have a lot of speaker notes that I need to apply a specific voice to. How do I apply the same voice to all of the speaker notes in the whole project at once? Or at least more than one? Any help would be appreciated. Thank you! I am working with Captivate 6.

Hi Vikram,
Thanks. That tip definitely helps! You just have to be careful when you use the CNTRL button and not highlight the name of the slide as you try to highlight the voices. If you do that, then the drop down box becomes “unclickable”. Unfortunately, when using the control button, it is sometimes impossible not to highlight the name of the slide as well.
Ryan
Von: VikramGaur [email protected]
Gesendet: Donnerstag, 20. September 2012 16:25
An: Scharfer, Ryan
Betreff: How can I change all of (or more than one) speaker note to a voice at once?
Re: How can I change all of (or more than one) speaker note to a voice at once?
created by VikramGaur<http://forums.adobe.com/people/VikramGaur> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4713463#4713463

I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

Several protocols may be used.
Here I describe two of them.
(1) the one which I use : install and use the "Convert to Lowercase" service available in the free WordService
(2) copy your text, paste in TextEdit and enter the Edit menu.
I guess that you will recognize the items in your English menu.
I apologize but I don't know the English items.
Yvan KOENIG (VALLAURIS, France) jeudi 16 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

How do I do a mass change of face names in iphoto? For example, I have 500 pictures named Michelle Smith, but she is married and is now Michelle Johnson. How do I change all the photo face names to the new name en masse?

How do I do a mass change of face names in iphoto? For example, I have 500 pictures named Michelle Smith, but she is married and is now Michelle Johnson. How do I change all the photo face names to the new name en masse?

You edit the name in the Corkboard view.

How can I change all the fonts at once on labels I downloaded from Avery?

How can I change all the fonts at once on labels I downloaded from Avery?

select all (Edit > Select All), then open the font panel by selecting the menu item "Format > Font Show Fonts". Now select the font you want.
I could only find Templates from Avery for Pages. I think my suggestion in still good but want you to know you posted this question in the forum for Numbers.

How can I change "All Inboxes" to two seperate inboxes.

How can I change "All Inboxes" to two seperate inboxes. My emails from two seperate accounts are merged in one inbox.

In the Mail app, tap on the Mailboxes in the top left of the screen.
That will show you all your accounts Inboxes
Hope that helps.

How do I change all caps to lowercase on Pages 08?

How do I change all caps to lowercase on Pages 08? Help says to use 'Lower' but I can't find it on the program.

If you have Pages '08, then you also have Numbers '08, which supports the LOWER() function.
Copy/paste your text into column B of a Numbers table, starting at B2
In cell C2, enter the formula =LOWER(B2).
Fill down to the last row containing text in column B.
Select the cells of converted text in column C. Copy
Go back to your Pages document and go Edit > Paste Values.
Unlike the Pages menu item (in the Format menu), which formats the text to display as lower case, the LOWER() Function does an actual conversion. The function works only in a table. It is probably supported in Pages tables as well as in tables in Numbers, but I haven't checked that.
Regards,
Barry

Premiere Elements 4.0 - How do I change all the clips from 5 seconds to 2 seconds in length?

Premiere Elements 4.0 - How do I change all the clips from 5 seconds to 2 seconds in length?

Christine,
The Duration of Stills is set with Edit>Preferences to the number of Frames required, where ~ 30 Frames = 01 sec. of Duration.
Unfortunately, the Duration cannot be reset (Edit>Preferences) for material that has already been Imported. The procedure is to Delete those Imported Stills, and make the change, then re-Import them, and you will get the Duration that you have reset.
The only other option at this point is to manually Click-drag on the Head, or Tail of each Still in the Timeline, to adjust the Duration. I do this with the Info Panel open and visible to make it easier. Personally, unless I am well into the editing process, the Delete, change and re-Import option is my choice.
Good luck,
Hunt
PS - the ability to alter the Duration en masse for Imported Stills in the Project Panel has just been added in PrPro CS5. I do not know if it has been added in PrE 9 though.

I recently bought my daughter an iPod 5th generation and quickly set it up with all my info ... E-mail , Apple ID etc. how can I change all of it to her name and new info without losing all her apps , movies and music ???

I quickly set up my daughters iPod with all my info ( e-mail , Apple ID and password ) how cam I change it all to new info under her name so she can have for her own ??

You will need to Erase the Device and Set up as New using her Apple ID.
Then... Sync her content...
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
Note:
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622

How to programmically change all fonts in Crystal Reports using VS2005

Post Author: KonRi
CA Forum: .NET
I want to change all fonts in my rpt files from Arial to Tahoma. I have:
ReportDocument report;
raport.Load(fInfos[i].FullName);
if (report.IsLoaded) ChangeFont(report, path);
... private void ChangeFont(ReportDocument oReport, string path) { foreach (CrystalDecisions.CrystalReports.Engine.Section crSection in oReport.ReportDefinition.Sections) { foreach (CrystalDecisions.CrystalReports.Engine.ReportObject crObject in crSection.ReportObjects) { FontStyle fStyle = FontStyle.Regular; if (crObject.Kind == ReportObjectKind.TextObject) { CrystalDecisions.CrystalReports.Engine.TextObject text = (CrystalDecisions.CrystalReports.Engine.TextObject)crObject; if(text!=null) { if (text.Font.Bold) fStyle = fStyle | FontStyle.Bold; if (text.Font.Italic) fStyle = fStyle | FontStyle.Italic; if (text.Font.Underline) fStyle = fStyle | FontStyle.Underline; if (text.Font.Strikeout) fStyle = fStyle | FontStyle.Strikeout; text.ApplyFont(new Font("Tahoma", text.Font.Size,fStyle)); } } else if (crObject.Kind == ReportObjectKind.FieldObject) { ... the same } else if (crObject.Kind == ReportObjectKind.FieldHeadingObject) { ... the same } else if (crObject.Kind == ReportObjectKind.SubreportObject) { CrystalDecisions.CrystalReports.Engine.SubreportObject crSubReport = (CrystalDecisions.CrystalReports.Engine.SubreportObject)crObject; ReportDocument crSubDoc = crSubReport.OpenSubreport(crSubReport.SubreportName); ChangeFont(crSubDoc,path); } } } if (!oReport.IsSubreport) oReport.SaveAs(path); }
This works fine but when TextObject has Embedded Fields those Fields aren't change and still have Arial font.My question is: how to change font in whole rpt file, including Embedded Fields?? RegardsKonRi

Is there any update on this ? I am facing the same problem.
Thanks

How can I change all Inf elements in an array to a specific value?

I would like to change all Inf elements in my array to -1. Basically, I am looking for something similar to the range and coerce function, except that I want all values above a certain value to be a specific negative value, rather than go to that value.
I could use a case structure and go through each element in the array, but I am hoping to find something more efficient.Any ideas?
Solved!
Go to Solution.

P@Anand wrote:
I would do that in this way.
Here's a simpler version...
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Replace in Array.png ‏4 KB

How can i change all the purple links in safari back to blue

I am having trouble figuring out how to change the links ive visited in safari back to blue. I have turned on PRIVATE so now my links dont turn purple onces ive visited the webpage but i can't figure out how to remove/change the already visited sites from purple back to blue! help me pleaseeee xx

OK.
Go to SAFARI tab from the safari menu and "reset Safari"
You can keep your passwords, just uncheck that option.
once done that, quit Safari, here is the trick. CLosing the Safari Window doesn't quit the app, to quit it you can either go to "safari" tab on the safari menu and Quit safari or press control key on the keyboard and click on the safari app and quit. that will erase those purple highlighted links

How do I change all the numbers in my IP address?

When I hit IP address release and then IP address renew it just changes like 3 numbers and I want to change all the numbers.

the question itself is confusing...
are you talking about changing the whole IP segment?
Just the IP address of your computer?
Assigning an IP address plays a BIG role in networking...
hope you give more info to your question...
Yesterday is history. Tomorrow is mystery. Today is a gift.

I am using spouse's old Mac Air - how do I change all ID to me now?

How do I change Macbook Air using OS X YOSEMITE 10.10.1 to my apple id and not my spouse who has a new apple computer?

go to preferences --> iCloud : log out from her acoount and log on to yours.
Message.app preferences: do the same thing
Facetime app: same

How do I change ALL cells in a Multi-Cloumn List box at one time ?

I would like to change ALL of the Cells in a Multi-Column Listbox at one time. Both, with the Editor and Programmatically. Any Ideas ?

Programmatically:
Use "Active cell" property node, create constant and type "-2" in both elements of the cluster constant.
Note: the first element is for the raw, the second for the column. -1 and -2 have special meanings.
-1: header of column (listbox has no header for the raws)
-2: all cells (of raw or column)
So for example:
-2;0: all cells of column 0 (with header)
-2; -2: all cells (with header)
-1;0: header of column 0
-1;-2: header of all columns

How do I change all transistions in a project?

Similar Messages

Maybe you are looking for