How do I change and .exe file so it will work on my mac?

I am trying to download an Active X plug-in and install it on my Mac so I can log onto a website that supports this Active X plug-in only. How do I change an .exe file so it will work to where I can install it on my Mac?

You can't install Windows software natively on your Mac but you can run Microsoft Virtual PC <http://www.microsoft.com/mac/products/virtualpc/virtualpc.aspx?pid=virtualpc> if your Mini is a PowerPC Mac or you can use something like Parallels <http://www.parallels.com> or Apple's Boot Camp <http://www.apple.com/bootcamp> if your Mini is an Intel Mac.
Virtual PC comes with Windows but Parallels and Boot Camp will require you to install your own licensed version of Windows purchased separately.
Then you'll be able to run Windows on your Mac, which means you can use ActiveX in your IE browser.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.8)

Similar Messages

How do I launch and exe. file?

I downloaded a youtube to mp3 converter. I have the exe. file but cannot figure out how to launch it to set up the program.

Install Windows with Boot Camp
Exe file only run with Windows
P.S. IMHO a very poor reason installing Windows. I would suggest doing some more ssearching for convertion programs because there are ones for Mac available.
P.S.S. But then I never think that is a good reason to install Windows.
Allan

How can I open and copy files on the win side from the mac side?

I am working on the mac side and I need to be able to copy files from the mac side that I create over to the win side. I can open and view win files when I am booted to Snow Leopard, but I cant copy files to the win side. I think Macdrive does the opposite.
Any ideas?
thanks,
C

to write to Windows NTFS you need 3rd party.
You have read only access to HFS from Windows.
MacDrive8 works in Windows to add write to HFS as does Paragon. Paragon has what I have come to see as the best NTFS driver for OS X, and they have a separate HFS8 for Windows similar to MacDrive8.
Maybe you want to run Windows as a client OS using Parallels instead?

Change a .exe file to a .swf

hello all ,
how can i change a exe. file into a .swf file
help greatly appreciated
thanks

Try this
http://www.19.5degs.com/swfextractor.php#swf-extractor
Regards
FlashJester Support Team
e. - [email protected]
w. - www.flashjester.com
"This has been one of the most impressive and thoroughly
pleasant
experiences of customer support I have ever come across -
astounding!"
Director - hedgeapple

How to open .rar files and .exe files on mac

HI
I'm new user on mac and would like to know how to open .rar files and .exe files on MAC OS X
Thanks

How is this a Compressor question?
.exe is a Windows only Executable, and can't be opened on a Mac, unless you have Windows installed.
Michael Trauffer

How to read accdb and mdb files using JDBC or File Adapter

Hi,
How to read and extract the .accdb and .mdb files from FTP server and parsing into xml by using FTP or JDBC Adapter in SAP PI7.11 With linx Os.
Regards
Upendra

Hi,
As per SAP note:1681420 i have to install the below driver from Microsoft
Our SAP PI installed under Unxi OS ,how to install the driver (.exe file) .
Driver name :AccessDatabaseEngine_x64.exe
Url:Download Microsoft Access Database Engine 2010 Redistributable from Official Microsoft Download Center
1681420 - PI : Where to locate the JDBC Driver for Microsoft Access
Regards
Upendra

How can i change a pdf file type to another file type

how can i change a pdf file type to another file type

You can copy the contents and paste it into a Word file. Just don't expect everything to transfer or to retain all of the formatting.

How can I Create a exe file were a tab control on it work`s

I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?"
Attachments:
project7.1.jpg ‏129 KB

Make the tab control a control and not an indicator. If you want to write
to it you need to create a local variable.
"Carlos-R." wrote in message
news:[email protected]..
I have a VI with many controls and indicators,these are spread on a
tab control.This tab control works with out any problems but if i
create a exe file then the tab control is fixed. How can I create a
exe file so that the tab control on it work´s ?"

How can I create a exe file with a tab control on it that work´s ?

I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?

I have made a new Posting with the same question but this time I added a screenshot of the VI.
Attachments:
project7.1.jpg ‏129 KB

How to convert FLV and F4V files to other media formats

How to convert FLV and F4V files to other media formats
Nowadays, every one can download their favorite videos from video sharing websites like YouTube, Hulu, MySpace, Google Video, metacafe, Yahoo! Video, Reuters.com and so on at will. However, these video files we got are usually in the format of FLV, or F4V, which are not workable by most portable devices, or some video players and video editors on our PC. With the intention of solving these problems, this guide will show you how to convert FLV and F4V files to other video and audio formats in detail.
1. Download, install and run Pavtube FLV Converter
As soon as you run this program, the following wine red interface will show up:
2. Add files, set output format and destination folder
Input FLV and F4V files to this program by clicking on “Add” button, and select a format as the output format in the drop-down list of “Format”, meanwhile, you can press the output folder to specify the destination folder or just use the path set by default. Moreover, “merge into one file” enables you to combine multiple FLV and F4V files to be as a single file, if you have this needs, just tick it.
3. Set advanced settings
Click “Settings” button, the following interface will pop up. You can change the parameters like screen size, bit rate, frame rate, sample rate, etc. on it to optimize the output quality or compress file size.
4. Convert
After all settings are done, you can press “Convert” button to start transferring, and then the following window will show you the conversion info in detail. According to the info you can manage your time and disk space properly.
Pavtube FLV Converter can definitely complete the conversion at a swift speed with excellent quality; also it adopts an advanced audio-video sync technology, so that audio and video match very well in the resulted files. Therefore you need not worry about these issues.
Useful tips:
Free online FLV downloader:
www.convertdirect.com
http://vixy.net/
http://www.videoconverterdownload.com/online-free-flv-converter.html
http://www.flv2mp3.com/
http://www.mediaconverter.org/
http://2conv.com/
http://online.movavi.com/
http://www.youconvertit.com/
http://www.playtube.com/
http://www.convert.net/

Flip4Mac

How do I change the Home file name back to Home?

Help! - How do I change the Home file name back to Home? My supplier changed it to Demo. I've tried pressing return, control click and Get Info but none gives access to change the name. Any ideas?

The Home folder isn't named "Home." It is named for the user account it represents.
Who is your "supplier?" Sounds like they're not terribly bright.
Can you provide some details on why they "changed" it. Is this a brand new Mac? Were you having information transferred from another computer?
It sounds like you just need to create a new account and get rid of "Demo."
While logged into the "Demo" account, go to System Preferences in the Apple Menu.
Click on Users & Groups
If the padlock is locked, click on it and enter your password.
Click the + button at the bottom of the list of users. This will create a new account. Fill in the information you'd like to use for your account. The account name is what will be used for the "Home" folder.
Once created, select it from the list and check the box to "Allow user to administer this computer."
You can then log out of "Demo" and log in as your new user. If there is nothing in the Demo account that you want, you can delete it from the Users & Groups System Pref.

How do I change the .php file name for a page of my site?

how do I change the .php file name for a page of my site? The only link to the page is the nav. button link for it in the global nav. The reason I need to change the file name is we want the breadcrumbing name to change and the breadcrumbing is linked to the file name.

The reason I need to change the file name is we want the breadcrumbing name to change and the breadcrumbing is linked to the file name.
I don't understand this reason. How would changing the file extension solve your breadcrumb issue? Why don't you explain the issue in more detail.

How to run an external .exe file from an indesign pluging

Hi,
      Suppose if I have written an separate application in C++ (.exe file) & need to run it from an indesign pluging(as if a service in windows). have you provided that facilities in your SDK? if it's please let me know how to run an external .exe file from a indesign pluging.
Thanks,

I'm actully writing data in PMString to a external txt file.
another question..
if i want to execute an action when the ok button is cliked how can i do it?
whe i add a button(widget) i know how to handle it. please see my code.
// Call the base class Update function so that default behavior will still occur (OK and Cancel buttons, etc.).
CDialogObserver::Update(theChange, theSubject, protocol, changedBy);
do
InterfacePtr<IControlView> controlView(theSubject, UseDefaultIID());
ASSERT(controlView);
if(!controlView) {
break;
// Get the button ID from the view.
WidgetID theSelectedWidget = controlView->GetWidgetID();
if (theChange == kTrueStateMessage)
//if (theSelectedWidget == kEXTCODGoButtonWidgetID
switch(theSelectedWidget.Get())
         case kEXTCODGoButtonWidgetID:
this->ViewOutput();
break;
         case kEXTCODFindButtonWidgetID:
this->SaveLog();
break;
// TODO: process this
} while (kFalse);
I do two actions "SaveLog" & "ViewOutput()" using two buttons. But i dont know how to execute an action when the ok button is clicked...

:-) How can we change the default file path for Bank file ( dmee ) ?

Hi All,
We encounter a problem.
Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
How can we change the default file path for Bank files ( dmee ) ?
We'd like to specify another path.
Thx for your help.
Erwan

Hello,
Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
You can link your PC directory to the application server.
You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
Hope this solves your problem.
Regards,
Ravi

How can I change a .band file created in GarageBand to an .mp3 file?

How can I change a .band file created in GarageBand to an .mp3 file?

Dorsey Hudson wrote:
My GarageBand didn't work exactly as you suggested.
my apologies, i dropped the word "then."
for future readers:
"use the Share menu, then tick the Compress checkBox..."

How do I change and .exe file so it will work on my mac?

Similar Messages

Maybe you are looking for