How do i change aspect ratio in iMovie?

I was sent a video whose aspect ratio is messed up—squished vertically. I imported it into iMovie anyway thinking I could correct it. I thought it would happen i the Export dialog where I input a custom size. But it hasn't worked.

I think I may know how to fix it. Just to be sure...,
Right-click on one of your Event clips. Choose Reveal in Finder. In the Finder, right-click on the clip and choose OPEN WITH.../QUICKTIME PLAYER. In QuickTime Player, type the letter i while holding down the Command Key. This will open up the QuickTime Inspector. Tell us the dimensions of your clip and everything that is listed next to the word FORMAT:

Similar Messages

How to change aspect ratio on shockwave

Hi guys,
I need your help. I cannot find the answers by how to change the aspect ratio on shockwave. Please can someone help me how I can change aspect ratio on shockwave??
Thanks

Just like this one:
[IMG]http://www.photo-dvd-maker.com/img/howto/original_4_3_to_16_9_fit.jpg[/IMG]
[IMG]http://www.photo-dvd-maker.com/img/howto/original_16_9_to_4_3_fit.jpg[/IMG]
[IMG]http://www.photo-dvd-maker.com/img/howto/original_16_9_to_4_3_fill.jpg[/IMG]
Is it possible to change the aspect ratio on the propert?? if so, which property that I should use to change the video frame??
Thanks

Change aspect ratios

How do I change aspect ratios before I start a project? 4:3 or 16:9
I have looked everywhere and do not see it.
Any help is greatly appreciated!
John

Change the Easy Setup to the appropriate anamorphic or widescreen format. If you make a new project the new sequence in it and the capture settings will be in the format you assigned.

Changing Aspect Ratio in FCPX 10.0.08

Hi - I think I must be losing my marbles because i cant, for the life of me, find out how to change Aspect Ratio during edit.
My rushes are previewable as full screen but once i pull them into the timeline they get letterboxed automatically.
I search online and came across advice to go to Sequence > Settings > Change Aspect Ratio, but i cant seem to locate it.
Can anyone help?

I dont seem to have that icon?

How to keep original aspect ratio when cropping in Camera Raw?

How to keep original aspect ratio when cropping in Camera Raw? Cant figure it out! With shift, the aspect ratio is 1:1. But I didnt set it to 1:1 (I checked "normal").

The Shift key works once you’ve set your crop ratio. DSLRs would typically do 2:3 and others sometimes do 3:4.

Can you 'force" change aspect ratio for DVD player 4.0?

Hi,
I have burnt a dvd-r from my pioneer hdd/dvd recorder (630H). The program is in 16:9 ratio but plays at 4:3 on my powerbook dvd player 4. (All other dvd-r burnt via other burners appear OK however - so I guess this is something peculiar to the Pioneer) Why is this?. Question is: is there any way to "force" the apple dvd player to change aspect ratios? Thanks for any assistance.

I've got about 20 video tracks and one audio track all laid out and I've decided I'd like to insert something before the audio track so if I move the audio track everything else will be off. Is there a way to shift all the video tracks and the audio track over to the right to make room for the inserted video?

How can I change the aspect ratio in imovie 10.0.1

After importing a movie in to the new updated version of iMovie which is 10.0.1 I noticed all the frames were elongated ( stretched out of proportion ), can some one tell me please how to keep the original ratio when importing or and how to change it after importing.
I first thought that maybe it was just how iMovie iMovie shows this aspect only when editing and that when the move was finalised it would revert back to its original ratio with any changes that i made, Only after two and a half hours of finalising this was not the case and the movie plays back stretched.
HELP!

You can't.
iM10 is 16:9 only.

How to crop canvas and change aspect ratio?

I'm working on a project shot with an old camera from the 70s. I used that camera but recorded the signal on my mini dv camera. Now I have a black border on the right side of the image.
This project is going on the Web, not TV. How can I crop the canvas (and change the aspect ratio) without a black border? I know there's a crop feature in the motion tab, but that results in same aspect ratio with black border. Is this possible?
(I don't care if the aspect ratio is non-standard, and I don't want to letterbox.)

If you are going to the web (what means you'll downscale at the end) and you shoot using an old camera, the loss of quality of the upscaling probably means nothing in your final web encoding.
You can make a test upscaling just some seconds of your movie an encoding it for the web to check the final quality.
Hope that helps !
Alberto

How to crop without changing aspect ratio/Crop mode

Is there a way to crop in Lightroom without changing the aspect ratio? That is my first question.
My second question, is it better to use APS-C crop mode on my full frame Sony A7R if I know at the focal length I'm gonna crop, or just take it full frame and crop in the software? Are there disadvantages to this when it comes to uses flash's etch?
Third, Currently I do not have a portrait lens as the Sony A7R is new and does not have many lenses out yet. Until the 90mm lens comes out I was thinking I could use the Zeiss 55mm 1.8 in Crop mode for a portrait lens. That would make it around 88mm would it compress the background nicely the way an 85mm lens normally does for portraits?

This is what I usually do, now I know for sure my aspect ratio has been locked. As far as shooting in crop mode though, what I meant about that is this; For portraits, if you take a 55mm and shoot a portrait with it, the background doesn't look that compressed, which I like. Even if it's at a good F stop. It'll be out of focus, but not "compressed" And seems to show more flaws in the person. This is why with my Canon I always used my 85mm or my 100mm. I know some who will only use a 200mm due to this type of compression that happens at longer focal lengths.
If I was to shoot in crop mode, making it 88mm, would it give me that affect? The compressed look I get from a 85mm? Or would it simply just crop it like I do in post and not really make a difference.
Sony has yet to come out with a portrait lens and I need one bad, I've been offered little jobs here and there and can't take them because I don't want to disappoint them. I'm waiting for their 90mm, because that is close the 100mm and 85mm I shot with on the 5D for portraits.
Not to same the subject here but, 'Benjamin Root Photography,' has been a great help to me on this forum. I also torn between getting the 16-35mm F/4, or the new 24mm F1.4 prime, for wide landscape shots, because landscape and hiking is where I do most of my photography.
I don't plan on actually shooting a landscape at 1.4, but if it's 1.4 that means if I stop it down to F 8 on a landscape it'll be tact sharp. But it is not a Zeiss and is only going to cost 500. On the other hand, there is the 16-35mm, still I'd shoot around F 8 or even higher for landscape, the problem is, if it's F/4 won't that mean it'll have to stop down much further than the 24mm to get a sharper picture?
I don't guess I can go telephoto, like anything over 100mm because I have the A7R. People say over 100 mm it has shutter vibration, so at 200 or 300 I wouldn't buy until the A7R ii comes out. I'm not willing to get the regular A7 ii because I really like the advantage of having all those megapixels for cropping purposes, and it just plain looks better. Which is why I took my Sony A7 back for the A7R. Everyone was saying the photo's were more impressive than the 5D Mark iii's with the Zeiss 55 1.8 vs 5D with 50 1.4L. That wasn't really the case with the A7, but when I got the A7R I seen a HUGE difference in dynamic range.
I've heard the A7 is better at focusing than the A7R, but since I switched to the A7R I have noticed literally no difference. But I don't shoot fast moving subjects.
With both cameras I notice the face detection and EYE AF is hard to get to work properly. If I let it auto focus fully It'll focus on the wrong thing a lot of times even though the green boxes say the right thing.
So, I have been putting it on a single point, keeping it at the center, focusing on the eye, and then recomposing. That's mostly how I did with the 5D anyway. I never allowed it to choose focus points for me either.

How do I control aspect ratio and pixel dimension in iMovie 10

When you created a new movie in iMovie 9 the program would ask if you wanted 4:3 or 16:9 aspect ratio and when you saved the movie it would ask about the size of the file and pixel dimensions. How do I controll these in iMovie 10?

I think they screwed up - but I have solved the problem by deleting it and reinstalling version 9.0.9 which you can get from the support at http://www.apple.com/uk/support/mac-apps/imovie/
Frankly I don't see the point of Theatre and I don't use iCloud so reverting back to a version that actually works seemed a good option!

Setting movie aspect ratio in iMovie 10.0.4

Im trying to set a specific aspect ratio of my new movie, but I cant find any way to do that. I see help docs that say you can choose the movie format when you create the project but the latest version of iMovie 10.0.4 seems not to offer that feature any more. Nor can I edit the movie format at all anywhere as far as I can see. When I export the movie I have only a very limited set of options all with 16:9 aspect ratio.
Is this feature no longer supported?

It is possible to change the aspect ratio and it doesn't need to be in widescreen. I found out how based on another forum. Here is the answer on how to do it:
1) Select a clip in the timeline.
2) Select the "Adjust" button at the top of the window.
3) Select the "Cropping" adjustment (the two right angles that form a square)
4) Select "Fit"
http://www.mac-forums.com/forums/movies-video/313345-imovie-10-0-4-960p.html#pos t1594108
I do find it annoying that when you drag a clip to the editor that it automatically changes the aspect ratio and you have to change it back.

How to get correct aspect ratio? Hi-8 transfer

I am Importing through a Datavideo box but cannot get the aspect ratio correct No matter how I set the project I get a 4:3 aspect rather than 16:9.
I don't have the problem in IMovie HD. When I open new project inImovie it asks for standard or widescreen and mports correctly.

I posted screen shots of each step I took.
http://www.flickr.com/photos/yoda8945
I downloaded the file from the camera to an event.
I created a new Project in 720x480 anamorphic
I went to timeline and the file is no not anamorphic.
http://www.flickr.com/photos/yoda8945
I a now starting to understand how this anamorphic thing works. It can stay at 4:3, but at some point I need 16:9.
How do I batch change in the browser? I don't find anything about an anamorphic flag.

Changing aspect ratio in Final Cut Express 4

I am having trouble with the aspect ratio of my clips.
I imported from a camera to iMovie '08, then edited all the clips which I needed (about 10 hours of 2 minute clips). Then I bought FCE4 as I realized I wouldn't be able to do what I needed in iMovie. I imported all the video in 16:9, and have checked the project settings on all of the clips in iMovie - all are set at 16:9, then I exported them as Final Cut xml files.
I've now begun to import them into Final Cut, but they come in as 4:3. In the project properties I have them set as PAL CCIR 601, but I am not given an option to set the aspect ratio. I've tried setting it to 1.422 in the motion tab of the viewer, but it doesn't appear to do anything.
So, how can I import these files into FCE4 and preserve the 16:9 aspect ratio?

Hi
Did You try.
• After Capture
• Select a Clip in Browser
*• The Browser window can be extended to the right.*
• Now more columns will be revealed - one of them Anamorphic
• tick this for the selected clip
• NOW drop clip into TimeLine (has to be done this way)
How does it Play ?
Yours Bengt W

AE changing aspect ratio of rendered frames

I'm rendering .png frames at NTSC DV, 720x480, Pixel aspect 0.9. My composition settings in AE are set to the same, however, when I import the frames they are listed as 720x480 (1.11). When viewed in the composition window the frames extend past the viewable area on both sides. Using AE 7.0.
Why is this happening, and how do I fix it?
Thanks in advance for any suggestions.

This is going to sound weird but it's the truth. The aspect ratio doesn't change the pixels. Aspect ratio only sets the interpretation - or tells a video app how to make those pixels fit in a desired space on a scan line. It's a lot like the PPI tag added to images intended for print. The tag has nothing to do with the actual pixels.
That said, if you can't find a setting for choosing pixel aspect ratio when you setup the output module and the render settings, then the PAR tag won't be added to the render. AE, or your NLE will then take a look at the frame size and make a guess as to PAR and field order. The guess may be wrong. If it is, all you have to do is go into the interpretation settings and change them.
I'd guess you're rendering to a DV codec. If so, there's no PAR tag so all you have to do is reset the interpretation. The same goes for Premiere or FCP or Vegas or any other NLE. Sometimes DV footage gets interpreted as the wrong PAR.
Hope this helps.

Move rejected to trash changes aspect ratio of a clip

I just switched from iMovie HD to iMovie '11. I imported all old projects that I did not yet work on into the new version. This worked fine and I created my first movie successfully. For the current movie I have a lot of raw material in the format of 16:9 (DV). So I rejected parts of a clip and moved these to the trash in order to free space. But after moving the rejected parts, something happend to the aspect ratio of the remainder of the clip. The remaining clip is now distorted to 4:3 (black bars to the left and right, image distorted in height). All other clips are still in 16:9 and the projects settings tell this, too.
Does anyone know how to reset the clip in the event viewer to the correct aspect ratio?
Many thanks,
Erik

It sounds like that in the process of deleting the first half of the clip, the Anamorphic flag was stripped off.
You should be able to fix this in MPEG Streamclip, which is free.
In iMovie, right-click on the Event clip with the bad aspect ratio. Select Reveal In Finder. Drag this clip into Mpeg Streamclip.
In mpeg streamclip, FILE/EXPORT TO DV.
Choose 16:9 as aspect ratio and leave everything else the same.
Import this clip back into your imovie project. When you are sure all is well, you can delete the other one.

How do i change aspect ratio in iMovie?

Similar Messages

Maybe you are looking for