How do I change DHCP range other than standard options

Recently I discoverd that the settings of the DHCP range of my Time Capsule changed after an update. Through my provider we have received a DHCP-range so I can access the disks remote via BTMM. Due the the internal fiber network it was necessary to adjust this. The range which was set started with 37.17. After the update it is only possible to choose from 10.0, 172.16 or 192.168.
The problem now is that I cannot remotely access my TC from outside the office. Can anyone please hand me a sollution.
See screen captures below
NEW:
OLD

This is interesting one.. normally the setup when using a block of IP's is not NAT at all. NAT must use the private IP address range.
So I am not sure how it worked in the old setup.
On the Internet tab.. you should select the static IP.
Then on the network tab, you set the dhcp to the actual range of addresses that you have been given.. surely not the whole block of 200 addresses.
That is just how the Apple auto fills it in.
It is only if you NAT that you would then have issues with the private IP range.
In this case you are NOT going to NAT. You are applying an ISP provided range of IP addresses to your clients.. and you must use just dhcp..
I cannot understand how you OLD picture with dhcp and nat could have worked. But it was a mistake in an older utility.. at a guess.

Similar Messages

When drag and dropping a page to a separate folder the default name is "Untitled Extract Pages.pdf", how do I change this to other default name?

Hi,
When drag and dropping a page to a separate folder the default name is "Untitled Extract Pages.pdf", how do I change this to other default name?
Thanks for any reply that can help!
BR
/H

I don't think you can change it.

How ALBPMEngine logs can be read other than using log viewer

Dear Friends,
Can anybody help on How ALBPMEngine logs can be read other than using log viewer?
Look forward for rsponse.
cheers

Max Meilleur wrote:
Mark,
I would be interested in knowing how you can decouple the obpmlogviewer.exe app from the OBPM Enterprise installation.
How can I send a simple .zip file to others and tell them: "hey, unzip (or install) this only and you will be able to read OBPM engine logs files on your local machine" ?
The logViewer executable can't be run without an enterprise install (at least not easily decoupled), however, an alternative, would be to pass someone the .jnlp and some log files.... To do this, open up the process admin, and in the top right, is a link for 'Launch Log Viewer'. Open that, and then go to 'File - Save As', and this will save a java executable to your computer.
I'm pretty sure you can pass that, and either an admin user and password to view 'live' logs, or just have them cancel the remote log, and open a local file....
Adam,
PS: I don't see any opbmlogreader.exe or .sh or .bet in the OBPM_HOME\bin directory. I am looking at OBPM standalone, and the only relevant files I can see are obpmlogviewer.exe , obpmlogviewer.lax , lax.jar. Am I missing something?
MaxI too don't have the log reader, however I do remember it... I'm thinking the .sh might only be included in the linux distribution of enterprise, so I'm downloading that now to verify... I will let you know what I find...
HTH,
-Kevin

HT1491 How to access applications in AppStores other than that of my home country, as the apps i need are not available in home appstore

How to access applications in AppStores other than that of my home country, as the apps i need are not available in home AppStore??!?

What you want is Not possible...
You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country...

I have imported an mp3 to my Library. I want to keep it as media kind = podcast but no matter how often I change the tag in get info options media kind, the change will not persist.

I have imported an mp3 to my Library. I want to keep it as media kind = podcast but no matter how often I change the tag in get info > options > media kind, the change will not persist, and the file remains in my Music list not my Podcast list.

Resolved in update.

The font on my internet browser and mail has changed. How do I change it back to a standard font?

The font on my internet browser and mail has changed. How do I change it back to a standard font?

Assuming you're using Safari, with Safari running open Safari's Preferences (Preferences in the Safari menu). Go to the Appearance tab, and set the ones you want.
Assuming you're using Mail, open Mail's Preferences (Preferences in the Mail menu). Go to the Fonts & Colors tab, and set the ones you want.

Is it possible to place custom CIDX message other than standard CIDX SCom

Hi ,
Is it possible to place the custom CIDX message in any software component other than standard software component CIDX which SAP has provided.Is there any restriction for CIDX messages?
Regards,
Ravi

Hi ,
I have custom CIDX Message structure under standard SWC CIDX .when I applied Patch to this SWC ,the custom CIDX message structure has gone, only SAP provided CIDX message structures are available. So I would like to know can I have custom CIDX message structure in other SWC.
Regards,
Ravi

How can I add vocal effects other than the 9 Voice options? (I can't shift pitch)

Hello!
I am making the switch from PC and am just trying to lower the pitch of a vocal track by at least an octave; I just got a MBP last week and am running GB 10.0.2. I can't find any info on similar problems that is helpful; most solutions I've come across show that when the track is selected, there should be a pitch shift bar with a sliding button, but I do not have that. I read a lot of people saying something about the track being purple or not, but I'm not sure if that's relative to the version I have or if that has anything to do with what's happening. When I select the track, in the little area toward the lower left when "Track" is selected, (what is that space called?) where the pitch shift option is for other people, I only have a sliding bar for Pitch Correction, and a checkbox for Limit to Key and Enable Flex. When "Region" is selected, it just shows the name of the region and there are no options. Another question I have is how to change the pitch of midi sounds? When the keyboard is open on the screen I have tried moving the little octave shifter, but it assigns the sounds that are on the keyboard at different locations if I move it, so it changes the sound completely. A couple of them shift one octave up or down, but there are no actual controls..
I'm mostly just dabbling with EDM/trap/Hiphop tracks at the moment, but am confused about whether or not there are other vocal effects and controls other than the preset Voice options in the instrument area (Bright vocal, Classic vocal, compressed vocal, Edge vocal, etc.)? I'm not going to be using GB forever, but are there not any other options like for current rap/trap production (phaser, balance, EQ, auto tune, choppers, actual voice altering effects, etc.) [preferably without buying extra things]? And not only vocals, but editing effects for all sounds.. If so, how do I get to them? And if not I know I should at least be able to lower or raise the pitch of a vocal recording... There are some pretty legit electronic instruments that are exactly the kind of sound I'm going for so I was surprised to not see an equally simple to access vocal effects board or something. Any additional tips for a n00b electronic music producer would also be greatly appreciated! Thank you for any help!

In GarageBand 10 you can no longer change a track with an audio file to a "purple" audio recording, as it has been possible in GarageBand '11.
Even, if you can make the transpose slider visible by enlarging the the track editor panel, the slider will be disabled.
What you can do however, is either add an AuPItch filter from the audioUnit panel or to convert your audio file to loop and to admit from the Loop Browser.
In the new GarageBand you add the AuPitch filter from the Smart Controls.
Enlarge the SmartControl panel by dragging the dividing line upwards, until you see the Audio Units brick, then add an Apple Audio Unit and set it to AuPitch.
Or create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library". You need to trim the filet an exact number of measures.
Set the current key and tempo, name the loop, and save the loop. Make sure, that one-shot loop is not enabled.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample like any regular loop.

HT4061 How do you change your phone number than is in your iPad and replace it with right one to receive and send messages?

How do you change your phone number in your iPad messages and replace it with another number. In order to send and receive messages to the correct phone number?

It's best to use an email address on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

How can I delete exact duplicates other than one at a time.

How ca I delete exact duplicate songs other than one at a time.

I've written a script called DeDuper which can help remove unwanted duplicates. See this thread for background.
tt2

How to have Canvas3D look in other than Z-axis direction?

I've figured out how to move the canvas around, but how do you change its direction?!

Hi,
U can simply do that even using a SimpleUniverse, you can just modify the Transform3D associated to the View, for example:
SimpleUniverse u = new SimpleUniverse(canvas);
Transform3D t3d = new Transform3D();
u.getViewingPlatform().getViewPlatformTransform().getTransform(t3d);
Transform3D deltaT3d = new Transform3D();
deltaT3d.rotX(Math.PI/2);
t3d.mul(deltaT3d);
u.getViewingPlatform().getViewPlatformTransform().setTransform(t3d);
in this way u rotare the view 90 degrees around X, so the rendering view is now directed along Y axis.
If u want the user to rotate the view, a simple KeyNavigatorBehavior does it using PgUp and PgDown key.
I hope I understood your question.
Mario

How to transport a VC model other than the simple import/export?

Hello,
What are the other options I have to transport a VC moel from one portal to another other than the export/import option that goes through my local filesystem?
If I will use the portal transport package to transfer the iView generated it won't work since the iView doesn't contain the complied application in it that needs to be deployed to the server. So what are the other option I have? And as a followup question, does VC integrated with NWDI or NWDS in some way?

Hi,
> If I will use the portal transport package to
> transfer the iView generated it won't work since the
> iView doesn't contain the complied application in it
> that needs to be deployed to the server.
Are you Compiling the VC model with "Deploy Model with PAR" checkbox in compiler tab checked? If you create a transport package and add all objects in the model folder, it will work.
What are the issues you are facing in portal transport import?
Regards,
Sooraj

How can Photo's be sorted other than by date taken?

Is there a way to sort Photo's on my iPad 2 other than the standard Apple method (date taken). .??

Once you have all 500 in the album you should be able to use the dropdown menu - there are three choices. Try switching to oldest first. Album order lets you drag into any order of your choice and they remain in fixed positions.

Goods Receipt requirement other than standard storage location

Hi,
SAP Guru,
Kindly guide on how to take receipt of Raw Materials against Purchase order or without Purchase order at other than RM01 or RM02 Storage Location
i.e. we purchase RM from Vendor A and we give this material to Vendor B for Job work and then we take GR from Vendor B
We generated 2 Purchase Orders for Vendor A and Vendor B
We cannot take receipt from Vendor A becuase they supplied prohibited material which cannot be taken as receipt directly in to SAP Standard Storage location instead we require to take receipt of same which accounts for Vendor B through which we can do Billing activity
With Regards,
kunal sheth

hi
as the vendor B is ur subcontractor ,u an use sub vendor deliery in po
create po for vendor A
now initem level delivery address tab ,at right side in vendor field give vendor B and tick for SC vendor
now the delivery will be done at vendor side
just try it
regards
KI

HT204053 How can I change the time to central standard time so my calendar entries are correct?

How can I change the time to central on my calendar

Settings > General > Date & Time > 24-Hour Time > OFF.

How do I change DHCP range other than standard options

Similar Messages

Maybe you are looking for