How do I change Document Restrictions?

I want to protect a PDF file from being copied, altered, and extracted; but I can't figure out how to alter the Document Restrictions. I DO NOT want a password. I'm uploading this document to a public website for public access, but I don't want the content being tampered with.
Thanks for any help!

Bernd Alheit, provide useful answers since forNever!
Sabian, when I save as Certified, I still have to lock it down with a password. I'm sure I've picked up PDFs before that were "open" but prohibited printing or copying... maybe I'm imagining things, though. I'll fiddle around further... thanks for the advice!

Similar Messages

  • How can i change the restrictions pass code

    How can i change the restrictions pass code

    Disable restrictions, then re-enable such. You'll be prompted for a new passcode.

  • How to trigger change documents based on inbound-idoc?

    Hi experts,
    Currently I'm working in on a project where I have to create an interface based on IDOCS. This is an interface for two SAP-HR systems.
    If there are made changes in the dialog (gui) by a user, there will be created a change document, which can be displayed by report RPUAUD00. For the inbound-interface based on idocs it's important that there will also be created a change document in the system based on this idoc. We have tested this, but no change document is created.
    Can anybody help me to solve this problem: "How to create a change document based on the inbound-idoc?"
    Thanks in advance.
    With kind regards,
    Roy

    Thanks for responding. First, I like the idea of defining an event, but I'm still stuck with how to trigger it. I looked at dynamically registering events, and maybe doing something where a click on the graph control registers an event for key presses on the vi. I'd still have to figure out out to terminate the key press event. Unfortunately, (actually it's a feature I like..) there are a number of different ways to complete typing in a scale change. I routinely use ctr-enter (habit from working on a laptop), though enter works fine, and clicking somewhere else is probably the most common method. I am not that familar with User Defined Events, so I may be overlooking something obvious here.
    The graphs are a Bode Plot, with a seperate graph for RPM vs Phase Lag, and RPM vs Magnitude. I want them to always be plotted on the same x-axis. The plot is generated when the user doubleclicks on a dataset. After that, it's just the user looking at it. They can change the axis without any new data being generated.
    Thanks,
    Chris

  • Changing document restriction in Adobe Reader using JavaScript

    Hi all,
    I'm wondering if it's possible to change the "Commenting" document restriction option of a pdf file with "No Security" as the security method, using JavaScript while in Adobe Reader.
    Thanks in advance,
    Kamil

    Not possible.

  • How do you change the restrictions password on I phone 4S?

    How do you change restrictions passcode on I Phone 4S?

    To remove the Restrictions passcode you will need to either...
    Restore the Device as New...
    http://support.apple.com/kb/HT4137
    OR...
    from a Backup created Before the Restrictions Code was set....
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • How can I change a restrictions passcode without losing all the restricted settings?

    We have two iPads for two boys... both are heavily restricted.  One of my boys saw the passcode and I changed it by disabling and then re-enabling restrictions, only to be shocked when ALL MY SETTINGS were reverted to default and DIDNT come back after enabling restrictions again.  How can I change the passcode on the other iPad without losing all the settings, especially the long list of blocked websites?
    Thanks in advance.

    What good would the passcode be if you could bypass it like that?

  • How do you change your restrictions pascode

    i forgot my restrictions pascode.  How do I change it??

    You need to restore your iPhone (http://support.apple.com/kb/HT1414), either from a backup made before the restrictions passcode was set, or to factory settings if no such backup exists.

  • How to use change document object ?

    Friends,
    I am learning to use the Change Document object for one of my Z table. I have created a change doc object using SCDO. I have now written a test report in which i am issuing the SELECT statement for fetching old and new values from the Z table and passing them to the FM generated by SCDO.
    I am not able to see the changes in the CDHDR and CDPOS tables. I am doubtful abt the values being passed to the FM. Here are the values i am passing:
    CALL FUNCTION 'YTEST_WRITE_DOCUMENT'
      EXPORTING
        objectid                      = 'YTEST'
        tcode                         = 'se38'
        utime                         = sy-uzeit
        udate                         = sy-datum
        username                      = sy-uname
      PLANNED_CHANGE_NUMBER         = ' '
       OBJECT_CHANGE_INDICATOR        = 'U'
      PLANNED_OR_REAL_CHANGES       = ' '
      NO_CHANGE_POINTERS            = ' '
       UPD_ICDTXT_YTEST               = 'U'
        n_ztest_cle                   = wa_ztest_cle
        o_o_ztest_cle                 = o_ztest_cle
      UPD_ZTEST_CLE                 = ' '
      tables
        icdtxt_ytest                  = itab_cdtxt.
    Is the object ID the same as the Change Document Object name ??
    Please help.
    Thanks,
    Ram.

    Well, i found a way out for the problem i was facing. I was not setting the "UPD_ZTEST_CLE " FM parameter. When i set it to 'U', the changes got reflected in the CDHDR and CDPOS tables.
    Can i reward myself as i solved this by myself ???

  • How to use change document for AUSP table in MM02?

    Hi All,
    I am working with MM02. When I change the characteristic value in classification view, I want that change to be logged in CDHDR table.
    I have created a change document object for AUSP table and generated update program for that. Now that program needs to be called in some <b>badi</b> or <b>exit</b> which can be called upon saving in MM02 after changing the values in classification view.
    Can anybody give me some idea where can I call that program.
    Any help wud be appreciated.
    Regards,
    Pragya

    Hi
    You have 2 possible solutions to meet this requirement.
    Option 1: Implement point # 3 of SAP OSS Note 943559
    Option 2: This is a workaround solution to skip standard SAP check for activation of change documents of Classification system and allow entries to be written into CDHDR and CDPOS table through MM01 / MM02 / CL20N tcode
    Solution: Implement an implicit enhancement inside include program 'LCLVFF10', at end of subroutine 'FILL_REDUN' i.e. line number '337'.
    Here modify the entry of table 'REDUN' where OBTAB = 'MARA' and set the flag 'AEBLGZUORD' equal 'X'. This will activate the change document creation for Change Object 'CLASSIFY' in CDHDR and CDPOS tables.
    Sample Code
    LOOP AT redun WHERE obtab EQ 'MARA'.
           redun-aeblgzuord = 'X'.
    ENDLOOP.

  • How do I change documents to PDF?

    How do I convert documents to PDF?

    Choose Print from the File menu and click on the PDF button, or if the application supports it, export them as PDF.
    (83294)

  • QUESTION - How do you change document to Tablet (11"x17") size

    I've looked in the Inspector and don't see tablet or 11"x17" as a size option. I couldn't find it searching in the Help program either. I know this is possible, I just can't seem to find out how to do this. Anyone know ho to change the document size to 11"x17"??

    The Inspector lacks the ability to modify Custom Page Sizes. This feature is only available through the Page Setup... menu item. If Apple does not include that as part of the File Menu, they are not following their own standards which causes inconsistencies between applications.
    (A similar issue has been in iCal for some time now, except that iCal only allows setup options through the Print... option. It doesn't even allow you to change orientations, but that is a different discussion.)
    The point is that the Inspector does not provide the same functionality as Page Setup theoretically would.
    Erik

  • How to get change documents for Equipment Master Records of a document?

    Hi experts,
    I need a report for changes of Equipment Master for a document.
    There is a way to reach this for every document : Environement - > Display Changes. Then I can get a report for "Changes to Object Links". But this can only show me that which equipments are linked to this document. What I want to search is which documents are linked to the equipment. I want to search with equipment number and get the history of changes for documents, Which documents are attached to this equipments and when did these documents attach to the equipment.
    Can I get this report with standard SAP queries / reports? Where can I get this informations? From which tables?
    PS: If i run a search with Equipment Master Data form CV04N, I can see which documents are linked to this equipment but I can't see when they are attached.
    Thanks in advance.

    .. but I can't see when they are attached...
    In CV04n,in Object Links tab,provide your search input criteria.Once the results are displayed,navigate to Current Layout button.Herein,move the 'Output Date' value to Displayed Column list.
    Once done,you should be able to view the date on which the DIR with associated objects(Eg: Equipment Master) was created.Hope this helps!!
    Regards,
    Pradeepkumar Haragoldavar

  • HT1688 How can i change my restriction password? I forgot

    I dont remember my restrictions passcode

    You cannot reset the passcode for restrictions. You will need to restore the device as new, not from a backup. The restrictions passcode is included in the backup. See this support document http://support.apple.com/kb/HT4946

  • How do I change document sizes?

    Any help will be appreciated.  I have a pdf document that has two (8.5" x 5.5") postcards on it in a "2 up" style on a 8.5" x 11" page.  I want to effectively enlarge both post cards to 9" x 6.25".  I am willing to live with removing one postcard from the page in order to accomplish this.  Can someone help me?

    Hi Michael!
    Are you working with Acrobat Pro?
    If so, please check out these helpful guides:
    Custom page size
    Create and use a custom page size
    Let me know if those work for you.
    Kind regards, Stacy

  • How to Change Document Default Status

    Hi Everyone, How can i change Document default status for Goods Receipt PO. I want like this
    When user create new GR PO the default status for the document should be "Draft"
    but now it shows status as "Open"
    Thanx & Regards,
    Amar

    Hi
    For this simple create one user for Qualtiy department and when ever u r receving the GRPO make a approval for this document. so the appoaval has to go to qualtiy dep. user, after he auhtorises then Add the doc.
    Make Row level UDFin the name of "Qualtity Passed" and Make Drop down as "Passed & Failled or as ur wish" ..
    so the quality dep user has to check the qualtiy of each row item d he has to make passed or Failled and tell him to add, for passed qty make invoice, for failled failled make return .
    Giri

Maybe you are looking for

  • Creative cloud applications doesn't start at all.

    hello, we recentrly had to copy the hard driver from a working windows 7 computers where Adobe Creative Cloud was working correctly to another computer. since, this other computer won't launch any of the creative Cloud apps (entreprise/education agre

  • Is there a PDF file size limit in Mail?

    Hi On an iPad 2 IOS 5.1.1, if I receive an email with a PDF sized around 1.6mb I can touch the download arrow and it counts up from 0 bytes to the size of the file then, once downloaded, I can open it in iBooks, Goodreader etc. If, however, I receive

  • How can you delete an anchor on a path?

    Maybe I am missing something but I do not see a way to delete an anchor in a path. Does anyone know if it is possible and how?

  • F-28 T-CODE - Open Document is not being pulled

    F-28 T-CODE - Open Document is not being pulled Item is shown as open on customer account (FBL5N). Item has not been cleared. When selecting items to apply payment, the following message is shown: "No appropriate line item is contained in this docume

  • TS3694 i have a code 3014 come up on my up date what dose it mean ?

    i have a code 3014 come up on my up date what does it mean ? and what do i do