How do I change legends in line charts when you change line type

I have created a line chart with two lines. I only have a black and white printer. If I change the two lines to black, the legends change to match. To distinquish the two lines I change the line type making one dots and the other dashes. The lines change but the lengends don't. This makes the graph useless.
Any suggestions on how to get the lines in the legends to change to match the lines in the graph?
Thanks for any help.
Paul

I could not get the line legends to differ either. You can add a marker to only 1 of the plots though:
Regards,

Similar Messages

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

DIVAB71,
Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
LindseyT_VZW
Follow us on Twitter @VZWSupport

How to change your Administration Server password when you're locked out

How to change your Administration Server password when you're locked out
The Netscape server products are all managed by a single administration
server, which gives you a web forms-based interface you can use to
configure them, start/stop them, check their logs, and so forth.

There are three levels of protection that keep the general public from
being able to get into your administration server and mess up the
configuration of any Netscape servers you have installed:

<OL>
<LI> Obscurity: Your administration server can run on any port you'd
like (usually something between 81 and 30,000), so if an attacker
doesn't know what port to find your admin server on, he can't get
into it.
<LI> Host restrictions: You can tell your admin server to only allow
connections from specific hosts, and to reject all other hosts.

<LI> Password protection: Even if a user connects to your admin server
from a valid host, he won't be allowed to get into even the first
page unless he presents a valid username and password.
</OL>

If you, the legitimate administrator of your web server, are unable to
access the administration server (if you forgot your password or the
admin port number or if you accidentally locked your own site out),
then here is how to get past each of these levels of protection:

<OL>
<LI> If you don't remember what port your administration server is
running on, just look in your "ns-admin.conf" file, which is in
the "admserv" directory under your Netscape server directory.
(For 1.x web servers on Windows NT, run "regedt32" and go to the
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
You will see a "Port" entry there that specifies what port your
admin server is on. You can change this value if you want your
admin server to run on a different port, but make sure you restart
the admin server after you change the value.

<LI> If your admin server is complaining "Unauthorized host" when you
try to connect to it, then you can open it up to all sites by
going into the "ns-admin.conf" file or the "Administration"
section of your NT registry, as described above, and deleting the
lines for "Hosts" and "Addresses" (either one of those might not
be present) then restarting your admin server (on Unix run
"stop-admin" then "start-admin"; on NT go into the Services
control panel and stop/start the "Netscape Administration" or
"Netscape Admin Server" service). You will then be able to get
back into the admin server, where you can then try new settings
for your host and address restrictions if you wish.

<LI> If you have forgotten the password to your admin server and now
you can't log into your admin pages, all is not lost! Go into
your "ns-home" directory, and into the "admserv" directory under
that. You should find an "admpw" text file containing a simgle
line of text, something like this:
admin:lnOVeixulqkmU
The first part of that line is the name of your admin account
(usually just "admin"), and the second part is your admin
password, encrypted. Edit this file to remove the encrypted
password so that your file looks like this:
admin:
Then shut down your admin server, bring it back up again, and log
into your admin server but don't give any password. It should let
you in, at which point you can then go to the appropriate
configuration page to set a new admin password, and then you're
back in business.
</OL>
Note that because it is so easy to change the admin password this
way, it's good to periodically make certain that your admin
password file and your web server's configuration files are not
left world-writable, and that only trusted people have access to
them. (By default they're not world-writable, but it's good to
make sure of this from time to time.)

If you mean that yu forgo the password for yur encrypted backup then you can only:
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946

I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Tnx

I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Can I do that manually through iTunes?
Thanks!

Hello jon713,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
App Store Application data (except the Application itself, its tmp, and Caches folder)
Application settings, preferences, and data, including documents
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
To transfer iTunes Store purchases from your device to a computer, follow these steps:
Connect your device to the computer. If it is synced with another iTunes library, the following dialog may appear:
Click the Transfer Purchases button.
Have a nice day,
Mario

I have changed my e-mail address and therefore need to change my apple ID. When I change it to my new address it says it is already my rescue address and cannot be used. Any ideas how to change my rescue address?

I have changed my e-mail address and therefore need to change my apple ID. When I change it to my new address it says it is already my rescue address and cannot be used. Any ideas how to change my rescue address?

To change the iCloud ID ("email address") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

When you change PC how to make connection with iphone and new PC

when you change PC how to make connection with iphone and new PC

Yes, you can do it the same as any other database. The code would be similar.
I'd also suggest you not to use the JDBC ODBC bridge for connection. There are other drivers available for that.
Regards
xH4x0r

Hello, I update my mac pro to 10.10. Why the photoshop cs6 change to slowly now. When I change the tools like brush to command+Z, It's will be freeze a while. why? and how can I improve?

hello, I update my mac pro to 10.10. Why the photoshop cs6 change to slowly now. When I change the tools like brush to command＋Z， It's will be freeze a while. why? and how can I improve?

what a long post....Apple, btw, does not read this stuff, so ranting, raving, and complaining here might make you feel good, but it does no good at all. That being said, I, too have a Mac Pro Quad Core Xeon with 6 gigs of ram and an nVidia 8800 GT graphics card (not as good as yours, alas) and I've had no problems at all with it. Yes, it doesn't have Thunderbolt, but maybe we Mac pro owners will get lucky and someone will come out with an adapter (probably not). No, you probably don't have to throw away your Mac Pro, but if you do, I'll take it, for a small "recycling" fee >:-) That was a joke. Yes, the Mac Pro's future isn't quite clear, YET. Hopefully that will improve very soon. As for not being able to upgrade to Mountain Lion. Don't worry about that too much, Nobody is forcing you to do that. Your Mac Pro won't quit working if it isn't installed. From what I've heard, you should give the new OS a chance, and wait to get it, in case there might be some bugs, or stuff not working with the new OS, which has been known to happen. Yes, we Mac Pro owners don't like being treated like mushrooms-kept in the dark, and being fed......... but Apple is Apple and it will do what it does, and there is nothing you or me can really do to change that. All I can say is....trust, have faith, be patient, go for a walk, do something else to take your mind off of this problem. IF apple decides to drop the Mac Pro for good, and that's a big "IF", I think they will anger a whole bunch of people
which isn't good. However, that hasn't happened...YET. Let us hope that it doesn't
John B

The icon that appears when you change the volume is stuck on my phone. how do i get it off my screen

the icon that appears when you change the volume is stuck on my screen. Can anyone help?

Hi antdagreat601,
Welcome to Apple Support Communities.
If you haven't already, I'd first try restarting or resetting your iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your device
Note: Reset your device only if you are unable to restart it.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If the volume icon doesn't go away, see our iPhone Troubleshooting Assistant for more help:
http://www.apple.com/support/iphone/troubleshooting/
Have a great day,
Jeremy

I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management. Can I resolve this?

I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management. Any ideas how I can get access to these now?

Hi Blotontheland,
Thanks for the prompt reply. The interesting thing is that my Macbook Pro was upgraded today to Yosemite and I still have the spinning wheel on the start up screen before the login page comes up.

How to give the length , cardinality and format when creatin a data type?

Hi,
I am new to XI and i wish to know how to give the cardinality ,format and length when creating a data type .Also please let me know how to give the following?
cardinality --repeating and required
non repeating , optional
thanks and regards

When you are defining the elements of the datatype there are columns where you can do what you need:
column type: here you choose the type of data of the element
it can be a standard type or a user defined one (if you click one time only it should appear an icon in the right for input help: click there and choose the type you need)
column occurence : in a similar way of column type here you define the cardinality of the element (min occurence and max occurence)
setting min occurrence: 1, max occurrence 1 or unbounded --> required
mmin occurrence 0, max occurrence 0, 1 or unbounded --> optional
about the attributes there are directly the choice between required or optional.
 column details : here you define the length of the element if it is a string or a lot of other things if the type is a different one.
I hope this will help you

I would suggest a new feature:The possibilty to change the mouse pointer icon when you hover on an a

I would suggest a new feature:The possibilty to change the mouse pointer icon when you hover on an active link by any other one icon I select.

Current Firefox versions have a feature called tear-off tabs. 
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window. 
You can drag that tab back to the tab bar in the original window to undo that detaching.
bug489729 (Disable detach and tear off tab):
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

When you change your Apple ID Password does it log out all the connected accounts?

When you change your apple id password does it log out all the accounts synced to it or connected?

You will need to logout of the account on all clients after changing the password, then login with the new one.

If you have the iPhone 4s and you buy the iwork...later when you change your phone to iPhone 5 with the same app name and code the iwork still free to download into your new phone???

if you have the 4s and you buy the iwork...later when you change your phone to 5 with the same app name and code the iwork still free to download into your new phone???

Yes as long as you use the same Apple ID for iTunes that you used to download the app originally.
Hope that helps

IBook shuts down when you change batteries

If only iBook could be like PowerBook, which runs on that little amount of spare power when you change batteries... Being owner of both laptops, I tend to change batteries for my iBook much more often than for my PowerBook, which I often use with a socket nearby.

Other than the PowerBooks the iBooks don't have a PRAM or spare battery (for the clock and so on) which would hold the system up during a (fast) battery change. So a complete shut down or an AC outlet are needed for a battery change.

How to keep first form window state maximize when you called the second for

HI,
how to keep first form window state maximize when you called the second form ?
Thanks

Here is sample of doing this.
Chris

How do I change legends in line charts when you change line type

Similar Messages

Maybe you are looking for