How do I change my airport extreme from dsl to cable?

I have recently changed my ISP from AT&T dsl to Comcast cable and don't know how to change the settings to my Airport Extreme. Please help.

Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme, then click Edit in the smaller window that appears
Click the Wireless tab at the top of the window
Click the Wireless Options tab near the bottom of the window
Select the 2.4 GHz and 5 GHz channels that you want to use
Click Update to save the new settings
Assuming that the AirPort Extreme is functioning correctly, the router will automatically scan to find the best available 2.4 GHz and 5 GHz channels to use.
It is possible that you might be able to guess as well as the utility, but you may not be able to guess better unless your scanning equipment will reveal "hidden" networks in your area.

Similar Messages

  • How do I change one airport extreme device for a new one?

    I have an old Airport Extreme (looks like a flying saucer) that my cable modem is connected to. Other Airport Express devices expand the wireless network around my house and Time Capsule is connected to the wireless network.
    I want to take advantage of 802.11n so I'm looking to buy the latest model of Extreme to replace the old one. I still want to connect the cable modem to the WAN port of the new Extreme but just wanted to be sure how I can "swap" the two devices and minimise the disruption to my wireless LAN and the devices that connect to it.
    I'd be grateful for any help or guidance.
    Kind regards,
    Cliff
    Brighton, UK

    Welcome to the discussions, Cliff!
    There is an old saying that goes something like "change one thing on the network and everything else on the network changes".
    While it should be relatively straightforward to connect your new AirPort Extreme to the cable modem, you will also be creating a new "main" network and a new "guest" wireless network...assuming you will use the dual-band version of this product.
    That means that any current devices that you have now that have been connecting to your old wireless network will all need to be reconfigured again to join the new network, so you are basically starting all over again from scratch with each device.
    Since you have configured your old system, you already know that it is not that difficult providing that you follow the configuration instructions carefully. I'm guessing that you have the older b/g versions of the AirPort Express, so perhaps the most tedious process will be to setup the AirPort Extreme and Express devices to participate in a WDS (Wireless Distribution System).
    You may need to refer to both the older and newer AirPort Networks guides as the older one includes step by step instructions for configuring the WDS while the newer guide covers the advanced features of the dual band Extreme. Please post back on your progress.
    http://manuals.info.apple.com/enUS/Designing_AirPort_Networks10.5-Windows.pdf
    http://manuals.info.apple.com/enUS/Apple_AirPort_NetworksEarly2009.pdf

  • How do I keep my Airport Extreme from logging into other networks?

    How can I tell my network to always log into our network and ignore the other signals it finds?
    In older MacOS's you could tell WiFi to only use trusted networks. My problem is that in my neighborhood there are lots of WiFi users and my airport network is always trying to use one of them (even though the signal strength is the same). The most annoying is Comcast, which seems to show up the most. I have Comcast for TV etc., but have the WiFi feature disabled on the modem. I want more control. Yesterday it got on one of my neighbors that isn't even secure?

    1. Have you ticked to "Ask to join new networks" ??
    2. Have you deleted all the other possible wireless networks from your listing.
    The network which should be the first in the list will be the one that is connected first. But we find it is best to empty the list.
    Maybe also check to require admin authorisation to change networks.
    Other than those things nothing else is offered..
    I have many wireless networks here and I have not seen the issue even on Mavericks.. but if any OS is going to give you grief Mavericks is the one.

  • How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility?

    How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility?  My company is using an Airport Extreme in our office now and I want to prevent other employees from messing with the network/settings.  Is there a way to place a password on the settings to allow only the admin to access the network name and password? 

    Hi - you have will have to change the device passwords on all the base stations and then don't give them to anyone except the administrators and tell them not to save them on their computers that use the older versions of the Airport Utility - for the newer versions like the mobile apps, as soon as you enter the pasword it is saved and is visible in the advanced pane along with the network password - so if anyone gets a hold of your iPad or iPhone, they can edit the whole network - I have this same issue with my networks in the office and it is inconvenient but doable - I hope this helps

  • How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

    How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

    ...Called it a roaming network.  Wireless mode is create a wireless network. I have checked allow this network to be extended.  Probably need to uncheck that?
    Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
    The other important settings for a roaming network are:
    Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
    Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
    Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
    Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

  • HT3728 how do I change my Apple Extreme password

    how do I change my Apple Extreme password

    It is extremely unlikely that someone has guessed your password unless you used something really obvious like "your name", "password", "default", etc as the password.
    It might first make sense to find out how many devices are connected to your wireless network. If you "see" 4 devices, and you only own 3, then you might have an unwanted guest on the network.
    To find out....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Hold down the option key on your Mac while you double click on the AirPort Exteme icon
    Look at the number of currently connected wireless devices (Clients). You can perform this check from time to time to keep tabs on your wireless network.
    If the speed on your network has slowed down, there are likely other wireless networks around you that are interfering with your signal. You need to restart the AirPort Extreme again so that it will automatically scan and select the best available channel to use at the time.
    To do this, simply pull the power plug from the back of the AirPort Extreme, wait 10-15 seconds, and then plug it back in.
    If you want to change the password for the network, open AirPort Utility, click on the AirPort Extreme icon, then click Edit in the small window that appears.
    Now click the Wireless tab at the top of the window.
    Edit out the Wireless Password and type in then new password, then do the same to Verify Password.
    I would also recommend that you change the Wireless Network Name.
    Click the Update button at the lower right to save the changes.

  • How do I use my airport extreme with my FIOS router?

    How do I use my AirPort Extreme base station with my FIOS Router to extend my network?  I have hard disks connected to my AirPort Extreme and would lik to access them.

    Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

  • How do i add my airport extreme to my DSL WIFI Modem to expand my network

    I have a DSL MODEM with WIFI. It replaced my Airport Extreme as a router.
    How can I use the Airport Extreme in conjunction to expand my wifi service through out my house.
    AIRPORT EXTREME MODELA 1354
    Modem is a Qwest PK5000z
    WPA-WPA2 PERSONAL
    MAC BOOK PRO 2011
    OS 10.9.5

    Ok, the Airport Utility Program NOW shows the globe, a green light next to the word internet
    below, there is a now a yellow triangle next to AirPort Extreme with an ! in it. """the messase to the right says
    Diveic Not Found:Airport Extremem was previously part of your net work Check that is still in range of you network
    (it is it's right next to the PK5000) it's plugged in. Forgetting this device removes it from this network."""
    AND NOW
    Bob, I can now see where I missed the fact that to do this the Airport had to be Wired_via ethernet,
    I was looking for it to be a boost wirelessly, not tethered.
    I’m not at liberty to modify the living space I am living in, holes and such and have cable run up exposed.
    Again, ignorance on my #1 status. This has been very informative but I do see where I can't accomplish what I wanted to do, have a booster in another room wirelessly.
    I think what I need to do is restore the Airport to factory setting and sit on it, not literally.
    I can't thank you enough for taking all this time with me. I trust you understand what I wanted and you did your best to provide.
    So I guess that's it for now.
    I'll look to you in the future, you really know your stuff
    All the best to you from MN
    jojoguitar

  • How do I connect my airport extreme to wifi as a repeater

    how do I connect my airport extreme to wifi as a repeater?

    Thanks for the info.
    Unfortunately, Apple has designed their routers to only extend or repeat the wireless signal from other Apple routers.
    It would be extremely unlikely that the AirPort Extreme would be able to extend or repeat a wireless signal from another manufacturer's router.
    I suppose that it could not hurt to try, but if the Extreme is still unopened, it might be a better idea to return the Extreme, get the information about the router at the neighbor's and then use a product from the same manufacurer that would be compatible to repeat or extend the wireless.

  • How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

    How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

    Start by establishing a permanent fixed Ethernet cable connection from one of the available LAN <-> ports on the ATT modem/router to the WAN "O" port on the AirPort Extreme.
    Ethernet cabling can be run up to 300+ feet or 100 meters, so you should be able to locate the AirPort Extreme exactly where it will be needed to provide more wireless signal coverage.
    Configure the AirPort Extreme to "create" a wireless network using exactly the same wireless network name, same wireless security setting, and same wireless network password that the ATT wireless is using.
    The final step is to insure that the AirPort Extreme is configured to operate in Bridge Mode, so it will work correctly with the ATT modem/router.
    If you need more specific steps, we need to know what operating system you are using on your Mac or PC. If you have a Mac and do not know which operating system it is using.....click the Apple icon in the upper left corner of the screen and then click About This Mac, and post back with the OS X version number that you see there.

  • How do I get my airport extreme to stop recycling? Using OSX 10.7.4, Airport Utility 6.1

    How do I get my Airport Extreme to stop recycling? I'm using OSX 10.7.4 and Airport Utility 6.1.

    The Airport Extreme is putting out the signal OK. Gan use my iPod no prob. The Mac goes from 'On' to 'looking for networks' back and forth all the time.
    As Apple has said the AirPort Extreme is functioning correctly if other devices can connect. You have a Mac issue, so that is really a question for the support area for your Mac.
    I suggest that you try one of these general areas, then pick out the specific model that you have:
    Desktop Computers             Notebooks

  • How do I access my airport extreme drives online

    how do I access my airport extreme drives over the internet?

    Here are the basic steps to share an AirPort Disk over the Internet.
    Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn,) and then, note the IP address shown.
    Select Manual Setup.
    Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
    Select Disks, and then, select File Sharing.
    Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
    Verify that Secure Shared Disks = With a disk password. (Recommended)
    Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
    Select Advanced, and then, select the Port Mapping tab.
    Click the plus sign to add a new port mapping.
    For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
    In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
    In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
    Click on Update.
    To connect to the shared AirPort Disk from a remote location using a Mac:
    From the Finder > Go > Connect to Server.
    Enter the DynDNS-provided Domain Name or Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
    Click Connect.
    You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
    Click Connect.

  • HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

    How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
    Thank you for any help you can provide.
    Arup

    This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
    In the meantime..
    Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
    With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
    ie
    You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
    Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

  • How Do I Connect An Airport Extreme With Password to another Wireless Devic

    We have a setup for two different wireless devices so that there are multiple locations that can get online, but the entire setup has no passwords assigned. We would like to assign passwords to both wireless devices so that only the appropriate people are getting online. How does one do this?
    The first wireless device that connects directly to the modem from the phone company is a brand new Apple Airport Extreme. The computer that set up the device so that people can get a signal was from a PC that is directly connected to the Airport Extreme via an ethernet cable. Also connected to the Airport Extreme is an ethernet cable that goes (50-100ft) to another wireless device - by Netgear - which then sends out another signal to pick up wireless internet, which is the signal/network that I work from.
    If we assign a password to the Airport Extreme, I'm guessing it will complete screw up the connection to the Netgear. How would that be dealt with? And, how could we then, if we wanted, set up a password for the Netgear as well. I've read some initial information on the user guide CD and online, but I don't know the terminology of whether these are networks or just wireless devices 'bridged' together, etc.
    My biggest concern, is it works right now, but the owner of the devices wants to put passwords on it and I want to make sure we can keep it working even with passwords. Does anyone know how to easily set up passwords and can I do it from my computer even though they were initially set up by a PC? Or do I have to do it from the PC and if so, how, because I am completely a Mac person and am very unfamiliar with Windows. Thanks.

    Question that I need to know now is how do we set up a password on the Apple Airport Extreme now, when it is already set up and working without one?
    Open AirPort Utility.
    Select your base station, and then choose Manual Setup from the Base Station menu. Enter the base station password if necessary.
    Click AirPort in the toolbar, and then click Wireless.
    Choose a password scheme from the Wireless Security pop-up menu.
    Enter the password all users will need in order to join this wireless network.
    AirPort Utility 5.1 Help: Password-protecting your wireless network
    Also, are there different types of passwords and if so, what is the most reliable one so that we don't lose connections, time out or have any other quirks?
    There are different types of wireless encryption. WPA2 and WPA are the most secure especially when used with a non-dictionary password. 128 bit WEP is passable in most situations but not very strong. 40/64 bit WEP is extremely weak.
    There is really no general "reliability" issue with any of them. Some devices aren't compatible with some of them.
    If when we assign a password to the Apple Airport Extreme and for some reason the Netgear stops working, how do we unassign/take away the password on the Airport to get it back to the current setup that we know does work?
    Follow the procedure above but disable wireless encryption instead of enabling it.

  • Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

    Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
    Airport gets it address DHCP.

    Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
    When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
    Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
    Note that the Express will not provide any additional wireless coverage when it "Joins".

Maybe you are looking for