How do I change my default printer to print in grayscale?

How do I change my default printer to print in grayscale using a MacBook Air? I have gone to "system preferences" and "printers & scanners." However, there is absolutely no option to change the print color scale. I see that option when I go to a document & print, but I don't want to go through the hassle of changing to "gray scale" every time I print. Thanks so much in advance!!

Hi,What operating system you are using? What application you are printing from?

Similar Messages

How do I change the default setting when printing a book

I live in Mexico and i just bought an iMac, the iPhoto software defaults to the Spain website and I would like to change the settings so that I can print books and have them sent to an US address. Any ideas?

According to this article, you cannot have iPhoto books shipped to an U.S. address if your billing address is outside the U.S. or Canada.
(19841)

How do you change the default size of the print batch size for mail merge in Publisher 2010?

I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

As soon as I posted, Ifigured this one out on my own by going into user settings and changing the default there. Then I was able to delete the default @mac account. Thanks!

How do i change the default Page Setup settings?

I have a recurring "bug" - whenever i open a PDF - and usually when i create new files (in any program), the default setting is to have it print horizontally at 65%.
to be more concise, if i open a blank document in "Text Edit" as an example and go to Page Setup - its already set to 65%, rotated horizontal - - instead of vertical orientation at 100%.....
This is frustrating, as I often forget this - go to print a PDF - and it comes out very small and rotated 90 degrees.
This even happened when i recently got a new printer and had to install / setup a new driver.
I was able to get it to stop a long time ago by deleting all of my printers and starting over from scratch - but the problem quickly resurfaced.
(I think it may have something to do with receiving a PDF from a third party that had this setting to allow me to print a larger drawing onto letter sized paper - - but it seems to overtake all of my files as default.)
I hope i explained this clearly.....what i would like to do is know how to definitively change this "default" setting.....

Hi, no idea why AAPL said what was said, just too busy I think!?
Anyway, have you tried File>Page Setup..., then setting the Scale, Size, & Orientation, then same Window>Settiungs>Page Attributes>Save as Default... or even the Restore Original Defaults there?

How can I change the default setting for downloading photos from email?

How can I change the default setting for downloading photos from emails I receive? It shows the default as Photoshop Elements 4.0 and is not supported by this system. That was my last computer!!
Thanks,
Sheila

That has nothing to do with styles nor Pages, it is a System/Printer Driver setting.
You can experiment to see if the Printer Settings stick with your document, but in the past this has not worked.
Peter

I am creating an aperture book from my photos. How do I change the default map provided in the theme to one of my choice e.g. satellite view?

I am creating an aperture book from my photos. How do I change the default map provided in the theme to one of my choice e.g. satellite view?

Kyle,
Thanks for your response. To be clear, the way I am importing the PDF is by going to New in LiveCycle, and selecting Import a PDF document, and selecting Create and Interactive Form with Fixed Pages.
I cannot change the forms or pages, as they are created by our local Board. In otherwords, I have tryed used the flowable content, and upon import, not only are the fonts slightly different, but all the important artwork (trade-related) is gone, and is not in the exact positions it was in. The forms must meet the standards to which they were approved by the regional board, and there are state-mandated forms as well.
What surprises me is that you say this method of Fixed Content isn't used much any more. I would think that a lot of people would have PDF files they would wish to make into fillable, interactive forms without needing to reconstruct the entire document. Perhaps a company that has always done things on paper, and now wishes to use those exact same forms on the computer, with no deviations to looks so they can be printed and match up perfectly.
I thought about using Acrobat's internal form creation system. However, some of these forms have sophisticated options and the calculation scripts and systems within LiveCycle are very useful. Not to mention that it has a much larger scalability, should we chose to utilize it.
Any other suggestions? I am so confused why Adobe would force medium-quality import of a PDF, but be so incredibly flexible about every other option in their program.

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

http://support.apple.com/kb/ht5621

HT204150 How do I change my default email on the "Me" contact from a Facebook email to my normal email address in the same contact? Or at least change it for the autofill information?

How do I change my default email on the "Me" contact from a Facebook email to my normal email address in the same contact? Or at least change it for the autofill information?
Perfernece for contact to change. Do I just have to dis-associate my contact fromt the facebook account? Is only the autofill changable?

If you allow Facebook to access your contacts and you have the @facebook.com email alias turned on, it will add the @facebook.com email to your contact info, and because it has the fixed label of "email" it overrides every other email address.
They didn't fix this in iOS 8.
There are two ways to remove the @facebook.com email from your contact info:
If you don't need your Facebook friends and their info updating your contacts, go into iOS Settings -> Facebook and turn off access to Contacts.
If you don't use your @facebook.com email address (all it does it forward to the primary email address) you can go into the Facebook app, More -> Settings -> General -> Email -> and uncheck "Use your Facebook email". Removing it from Account Emails does not work, you have to turn it off. Once you do this, go to iOS Settings -> Facebook and turn Contacts off and on again to make it update your info. The @facebook.com address should be removed.

Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.

How can I change the default driver to OracleXADataSource in JDeveloper

Hello,
How can I change the default oracle driver: oracle.jdbc.OracleDriver to oracle.jdbc.xa.client.OracleXADataSource in JDeveloper Studio Edition Version 11.1.1.0.2, Build JDEVADF_MAIN.BOXER_GENERIC_090328.0229.5205.
If I modify the file connections.xml from jdeveloper\system\system11.1.1.0.31.52.05\o.jdevimpl.rescat2\connections in the sense that I change the driver class, then in JDeveloper when I test my connection I have this problem: Test failed: oracle.jdbc.xa.client.OracleXADataSource cannot be cast to java.sql.Driver
Why do I need this XA version of the oracle driver? Well I tried, from a book to reproduce the model of an application: entities, stateless and stateful session beans, mdb, web services and a client to test one part of the model.
And because of the JMS server I need an XA driver.
I deployed to the integrated wls 10.3 and when I test my client, if I use the default driver for the connection the an error message appears tell me either to emulate two-phase commit or to use XA driver.
My application works very well, if I configured in the console of the integrated wls 10.3 a datasource with the same name as my ide/application connection that has for the Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource in the Connection Pool tab.
Thank you.

Open DIsk Utility and in the toolbar select Disk Image. The file selector will open and you'll have to do three things: 1) just as with any file, name it and point the file selector to where you want it to be saved, 2) near the bottom you'll see name - type iWork 2013 and 3) below that select the image size. Click on size, choose custom and type 1500 MB then click on the Create button.
Some time will pass and then you'll see an external disk pop up on your desktop and/or the Finder window sidebar. Drag the three programs into it and eject it like any other external disk. Now delete the programs from your applications window.
Where ever it was you pointed the file selector to you'll see the file you created. Double click on it and the disk image will mount again.

When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?

Question
When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?

Is FF downloading the file as a .txt file? If so, go to "Folder Options" in the windows control panel. Click on the "File Types" tab. Scroll down until you reach the TXT file extension. Look to see what that extension opens with (lower part of panel). It probably shows notepad. Click on the <Change> button. Scroll down until you find "Microsoft Word." Select it and click the <OK> button. That should show the TXT extension is now associated with Microsoft Word. Click the <Close> button at the bottom of the panel.
If FF is downloading the file as any other type, use the same process as above except look for the corresponding extension instead. If the extension is not listed click on the <New> button and create an association using the extension in the file name and then associate it with MS Word.
davewdan

Mail -- How can I change the default email account from which my messages go, without having to change it each time I draft a message? It currently assumes an email account that I rarely use. Thanks.

How can I change the default email account from which my messages go, without having to change it each time I draft a message? It currently assumes an email account that I rarely use. Thanks.

sorry, but I can't find the mail preference in the latest Yosemite OS. Do you know where I can find it?
Thank you
Don

How can I change the default Google search engine in Firefox 8 from google.fr to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want UK based responses.

How can I change the default Google search engine in Firefox 8 from google.fr to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want UK based responses.
I'm using XP Pro.

You can find search engines on the Mycroft Project website.
* http://mycroft.mozdev.org/
* http://mycroft.mozdev.org/google-search-plugins.html

HT3965 How can I change the default Apple ID on and IPad?

My daughter just gave me her IPod - how can I change the default Apple ID? Every application update comes up with her email address.

Delete all the applications, sign into the iTunes Store with your Apple ID, and download the ones you want.
(98113)

How do I change my default printer to print in grayscale?

Similar Messages

Maybe you are looking for