How do I change my photosmart plus printer from usb to wireless

Could not get my wireless photosmart printer to connect to my computer and had to do it by way of usb hook up.  I am operating win 7.  How do I now convert from usb to wireless?

Hi,
What is your printer ? Please try this:
Click Start > All Program > HP > HP Photosmart {your printer} > Printer Setup & Software.
You should see a screen, select "Convert a USB connected printer to wireless"
Follow instruction from there.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Trying to change HP Photosmart 6510 printer from USB to wireless -

    There is no statement to click on "Convert a USB connected printer to wireless" setting.  Therefore I cannot switch the connection to wireless without this setting.

    Hi
    Try setting up the wireless by going to the link given below;
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02894181&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Regards

  • Mac OS Photosmart C4700 "disconnected" from USB during wireless setup

    My Photosmart C4795 printer has been connected to wireless on my Windows based PC at a different location. Now I have a Mac and I am living elsewhere, but when I try to use HP Setup Assistant and connect to a Wireless Network it recognizes the printer connected via USB; but, when it begins to search for wireless networks I get a message saying that I need to connect it via USB temporaily. It already recognized the printer through USB? I never unplugged the USB cable? I've already tried completely uninstalling my HP software and completely installing it again. No results. I've also used the printer's keys to reset the wireless network preferences to default. No results. Any help would be greatly appreciated, I can print via USB but the reason I got the printer in the first place was to print wirelessly.

    Hi Boltonet12,
    I understand that you want to connect to your Mac OS wireless. I will try my best to help you with this issue.
    Here is a document for Installing the Printer Software for a Wireless Network Connection (Using an Access Point) follow the steps for setting up on a Mac OS X.
    I hope this information helps, please let me know how it goes.
    Thank you,
    I worked on behalf of HP.

  • How to set photosmart plus printer to print automatic printables only in black

    Hi im trying to see if there is a way to set my Photosmart plus printer to print my app printables only in black ink

    I am going to assume here actually that this may not be a possible task.  I know it seems it would conserve ink but even most all black-only pages are made of composite black which is derived by a combination of all the colors to give it a sharper image or it will appear dull.  
    Plus, the option for black only is found in the print driver when printing directly from a PC.  The printer itself does not seem to have that option in the device menu/tools.  Some models do have ink-saving options in their eco-mode settings, but (from memory anyway) I do not think this is one of those models.
    If there truly is a setting for it, then it will be found in the printer's web page.  Open a web-browser and type in the printer's IP address (available on the network configuration page  "IPv4") and explore the settings in here.  I have my doubts but it is always worth a try to at least point you in the right direction.
    The manufacturer of the app usually sets the perimeters for these functions so if there was such an option you would find that on the app's page at the hpconnected/eprint website.  A lot of apps provide a section for suggestions, maybe submit an idea and see if they offer a solution.
    Good luck! Let me know what you come up with.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Is there any way to print a photo from my iphone on plain paper on my photosmart plus printer?

    Whenever I try to use Airprint to print a photo from my iPhone to my Photosmart Plus printer, it tries to print it on photo paper from the photo paper tray.
    I want it to print on the plain paper in the regular tray.
    I read online where this is possible with the iPrint app - but when I went to the App Store, there is no iPrint App.  I found a sticky post here saying that it has been removed from the App Store in anticipation of a new ePrint Home & Business version that won't be available everywhere until September.
    So, in the meantime, is there anyway to change the location of where the photos from the iPhone print?
    Thanks in advance for any assistance.

    HI
    Most likely their is not, as printing pictures is standard set to photopaper as you most likely need good quality. Pictures on normal paper are not considered good quaity and thus not set as standard.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • [Solved] Hp-setup cannot find my HP Photosmart Plus printer

    Hi all,
    I'm trying to set up my HP Photosmart Plus printer. I have an Arch desktop acting as the CUPS server, which I ssh into from my laptop. I've gone through the CUPS installation and linux - linux sharing instructions. When I try to set up the printer through the CUPS web interface, it easily detects and adds my printer. I can access it from my laptop and print stuff fine. However, it will only print out:
    **** Unable to open the initial device, quitting.
    I discovered that the printer should instead be set up using hp-setup. Running hp-check -t gives this.
    Running hp-check --fix prompts to reinstall the printer through hp-setup, and so it removes the printer from CUPS and starts hp-setup -i.
    When I select "net" for the connection type (my printer is wireless), it can't find my printer, even though the standard CUPS interface had no problem with this.
    [?1034h
    [01mHP Linux Imaging and Printing System (ver. 3.12.11)[0m
    [01mPrinter/Fax Setup Utility ver. 9.0[0m
    Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    (Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
    | SELECT CONNECTION (I/O) TYPE |
    Num Connection Description
    Type
    0* usb Universal Serial Bus (USB)
    1 net Network/Ethernet/Wireless (direct connection or JetDirect)
    2 par Parallel Port (LPT:)
    [01m
    Enter number 0...2 for connection type (q=quit, enter=usb*) ? [0m
    Using connection type: net
    error: No device selected/specified or that supports this functionality.
    Here's a list of all the packages on the system, in case you're doubting that I forgot to install a particular dependency.
    If you need any more info, just tell me.
    Thanks!
    Last edited by Mindstormscreator (2012-12-18 21:55:23)

    So I tried connecting it through USB instead, and now I get these messages:
    Using queue name: Photosmart_Plus_B210
    Locating PPD file... Please wait.
    warning: No PPD found for model photosmart_plus_b210 using new algorithm. Trying old algorithm...
    Found PPD file: drv:///hp/hpcups.drv/hp-photosmart_plus_b210_series.ppd
    Enter a location description for this printer (q=quit) ?pool-room
    Enter additonal information or notes for this printer (q=quit) ?
    Adding print queue to CUPS:
    Device URI: hp:/usb/Photosmart_Plus_B210_series?serial=CN15V3250N05J9
    Queue name: Photosmart_Plus_B210
    PPD file: drv:///hp/hpcups.drv/hp-photosmart_plus_b210_series.ppd
    Location: pool-room
    Information:
    error: Printer queue setup failed. Please restart CUPS and try again.
    I've gone on a hunt for this ppd file before with no success. Does anyone know an absolute location to obtain it?

  • On windows8 how do I switch a photosmart 6520 printer between offline and online

    on windows8 how do I switch a photosmart 6520 printer between offline and online  

    Hi 1jsl
    I'd like to help you get the printer communicating with the computer. Please follow the instructions in the following document. This document addresses 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print as well as,
    Printer won't print
    Print jobs are stuck in the print queue (A log of print jobs waiting to print)
    No response from the printer
    Thanks for joining the HP Forums, I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Printed photos on my HP Photosmart Plus B210 from my iphone a few times, but now it will not respond

    Printed photos on my HP Photosmart Plus B210 from my iphone a few times, but now it will not respond.  My phone still recognizes the computer, but nothing happens.

    Hi @maka4868
    Welcome to the HP Support Forums.  I understand that you are no longer able to print to your Photosmart Plus B210 printer from Microsoft Word.
     I am presuming that you are using a Mac Operating System as indicated at the top of your post.  I have done some research and found Microsoft’s document titled Troubleshooting damaged documents in Word for Mac.  It has the steps when printing from Microsoft Word 2008 for Mac.
    Please let me know the outcome.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Will my hp officejet pro 8600 plus print from my ipad.

    will my hp officejet pro 8600 plus print from my ipad.?
    This question was solved.
    View Solution.

    Hello,
    Yes.  Try following the instructions here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
    If that does not help, let me know and I will see what I can do.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HT4356 How do I disable the ability to print from an iPad?

    How do I disable the ability to print from an iPad?

    I have the Apple Configurator. If it has the ability to block printing from an iPad, I was not able to find it. I might check out the windows version. Do you know if the windows woek on iPads (It is called Apple iPhone Configurator)?
    1) Apple never renamed "Apple iPhone Configurator" after the iPad come out.  Name should be something like Apple iOS Configurator.  Apple iPhone Configurator will work with the iPad.
    2) Doubt there is a functional difference between the Mac & Windows versions.
    3) Check with iOS 6.  Some resrictions have changed.
    Robert

  • Mail -- How can I change the default email account from which my messages go, without having to change it each time I draft a message?  It currently assumes an email account that I rarely use. Thanks.

    How can I change the default email account from which my messages go, without having to change it each time I draft a message?  It currently assumes an email account that I rarely use. Thanks.

    sorry, but I can't find the mail preference in the latest Yosemite OS. Do you know where I can find it?
    Thank you
    Don

  • HT204053 how do i change my icloud email address from the one i already have input?

    how do i change my icloud email address from the one i already have input?

    Hi sparkie,
    You cannot change your iCloud email address. It is an @me.com address, and is associated specifically with that iCloud account. If you want a different @me address assigned, you have to delete the current iCloud account and set up a new one.
    Here is a link with all the support information for iCloud:
    http://www.apple.com/support/icloud/
    Hope this helps!
    Cheers,
    GB

  • How can I change my auto-correction language from english to french?

    My system language is english, so all the default language is also in english
    but how can I change the auto-correction language from english to french and without changing the menu language?
    Message was edited by: Marixomia

    It's just, I want to change my spelling checker from english to french, that when I type some words in wrong order or miss some, I can know that.
    For now, when I type in french, almost every words are underlined by the red lines...

  • How do I connect a Lexmark x6570 printer to my iMac wirelessly?  The basic user guides are not helping me and the add printer is not finding my printer...

    How do you connect a lexmark x6570 printer to an iMac wirelessly?  The basic user manuals are not helpful as the printer is not showing up when using the add printer function.  I my printer is working fine wirelessly with my windows laptop so it appears to be functioning fine.  This is my first time using an Apple at home...
    Thank you.

    Hello,
    I am using a Mac with this router. Any ideas how I can set it up to print wireless. Im not a tech person so this gets confusing for me sometimes. 
    Thanks!

  • Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

    Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

    Hi, did you upgrade the OS lately?
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php

Maybe you are looking for