How do I change my resolution after iTunes has changed it to a lower ppi

I am using Win7 with an iPad. When I first logged onto iTunes the site changed my resolution. It is now lower than is should be. I have two screens, a lap top and a 17" monitor. When I slip one page from the laptop to the larger screen i lose about 1/5 of the width.
I can't change the resolution to what it optimally should be for my system. How do I fix this?
I love my iPad and the Apple Store. But this is reminiscent of MS making a system operate how MS thinks it should operate instead of how the user wants it to operate.
thnx

It's not possible to comment unless you would like to post the URL of your feed.

Similar Messages

  • How can I change a column to lower case?

    I selected an entire column and discovered that it's already set at Format > Font > Capitalization > None
    If I change "None" to "All Caps," it capitalizes everything. But when I change it back to "None," letters that were originally capitalized remain capitalized. How can I change EVERY letter in a column to lower case?
    Thanks.

    Format > Font > Capitalization changes how the text is displayed. But it doesn't change the actual text.
    To change all letters to lower case you can use the LOWER() function in cells that refer to the original text. Then select the cells with the formula displaying the "recapitalized" text, command-c to copy, and Edit > Paste Formula Results to remove the formulas.
    SG

  • How to reimport library with ratings after iTunes reinstallation?

    I'd been off iTunes for 6+ months and when I started it back up, I was prompted to update my iTunes with a newer version. Little did I know it would be a complete reinstall. Anyways, once the reinstall was done, none of my music is showing up in iTunes.
    I searched Apple support "import library after reinstalling iTunes" and of course found noting of use. I googled and the consensus was that to import your library you just drag your music folder into the library. That was easy, but now I don't see any of the ratings that I'd given to each song. I've spend 10-20 hours rating every song on every album I have so I dang sure don't want to lose all that information. Also, all of my personal play lists are gone.
    While I'm significantly annoyed that Apple didn't make this updating process a bit more painless & seemless, I'm more concerned that I might have lost all the hours I've invested in personalizing my library.
    If anyone knows how I go about reimporting my ratings and playlists, I'd appreciate your assistance.
    Thank you.

    What exactly are you trying to do?  You already have another library on the computer and wish to add items from another library?  This is not easily done and meeting all the requirements you have posted.  While it is possible to transfer play count I think it is one of the things that requires Applescripting knowledge.
    If you are just wanting to move a library from one place to another that is possible, though still tricky because you start encountering user permissions.

  • How to get paid versions back after itunes update on an app.

    I have had two apps recently updated and they both went to the free version and nowhere in settings on the app is there a setting for paid upgrades to be reopened. Have contacted both vendors and have heard nothing after numerous tries and threats, any way to get them thrown off Itunes?

    If they are no longer on your phone then do you have them in the Tones part of your computer's iTunes ? If you do then you can sync them back.
    If you don't then you will need to pay to redownload them, they are one-time downloads from the store. Or you can try contacting iTunes Support and see if they will grant you a redownload : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • How do I fix screen resolution after I synced with IPhone?

    I just purchased an IPad and have synced my apps & such from my IPhone thru ITunes.
    But now, all videos and apps are small like they are being viewed on they IPhone and I
    have tohit the (x2) button to get them to expand on the screen. BUT....whe this is done
    the images/videos are all pixelated and out of focus.  Do I have to repurchase everything
    just to view it all on the IPad?

    There are basically three types of app : iPad only; universal; iPhone/iPod Touch (most of which also work on the iPad).
    If there is a separate iPad version of the app (which quite often have HD in their name) then if you want them you will need to purchase them - there is no free download of them, and no trade-up option in the store.
    If the apps are universal apps (indicated by a '+' symbol against them in the App Store) then there is one version of the app which has processing within it which recognises the device that it is on and will configure the display accordingly - there is no need to re-download them from the store unless you no longer have them on your computer.
    If the app is only designed for the iPhone/iPod Touch then it will still work on the iPad (unless it is one of the few iPhone only apps that require full phone capability) but it will just take up an iPhone sized portion of the screen, unless you press the '2x' button on the screen which will effectively double the size of each pixel in both directions (so therefore may appear pixelated). Again there is no need to re-download.
    It is up to the developer whether they want to create one version of the app for all devices (i.e. universal), or whether they make separate iPhone/iPod and iPad versions.
    Check that you have the most recent versions of the apps on your iPad by going onto the Updates tab in the App Store app.

  • HT201210 how can i enable my device after it has been disabled and itunes wont connect to it?

    itunes wont connect to my device because it has a passode set. but i can not disable the passcode because my device is disabled. what can i do about it?

    Put iPhone into Recovery Mode. Open iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click the Restore button of iTunes.

  • How to edit/modify workflow task after it has been completed?

    My workflow spawns a couple tasks and once those tasks are completed, they become non-modifiable. If the user made a mistake by entering wrong details while completing the task and would like to change it later, he cannot do so once he hits the complete
    button. This is happening in SharePoint 2010.
    We were using SharePoint 2007 earlier when this wasn't the case. The tasks could be modified even after they were completed. I would like to have the same behavior in 2010 too. Please suggest how can I do it? There should be some task settings to enable
    modification but I just can't find them. 

    Hi,
    Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
    Thanks,
    Linda Li
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • How to remove boot camp partion after windows has been deleted

    I have removed windows 7 from my mac book air. however the partition will not be deleted... how can I remove the partition.

    Hi,
    Usually the correct way to remove your Windows partition is to use the BootCamp Assistant again which should give you the option to remove the made Windows partition and revert back to one OSX volume.
    After that's done a reboot of your Mac might be advisable. After the reboot use the BootCamp Assistant again to make the Windows partition and then install the (hopefully correct) version of Windows.
    Only if that's not working (whatever the reason) :
    1) boot your Mac from your OSX install DVD
    2) choose your language and then 'ignore' (cancel) the installation
    3) from the Top Menu (Utilities) start Disk Utility (DU)
    4) in DU click on your harddisk (not any partition) in the left pane (the first item listed)
    5) in the right pane use the 'Partition'-Tab
    6) click to highlight on the ex-Windows partition you want to delete
    7) click on the small '-' Button at the bottom
    That should delete your former Windows partition
    After that's done successfully
    8) Drag the partition separator line until it encompasses the entire drive and then select apply.
    9) Quit Disk Utility
    10) reboot your Mac from your harddisk.
    Since you are 'fumbling' with your OSX partition you should consider having/making a backup of it before trying the a.m. procedure. Just in case.
    Regards
    Stefan

  • How to restore your old music after it has been erased from being synced??

    I once had music on my iphone and i synced it on my laptop wth itunes and now everything has been erased!!!
    How do I get everything back. I tried adding the music again but nothing it working. i EVEN checked my history of songs played on itunes and has some of my old songs on it but I don't know how to get all of it back??? someone PLEASEEEE HELPP ASAP !!!

    Well, the level of pain you are about to experience will hinge on what level of backup you have of the phone. If none, you will soon have a blank, from-factory phone you will have to reconfigure from scratch.
    Read here: http://support.apple.com/kb/HT1212

  • Itunes crashes as soon as I open itunes store. Also message: data execution prevention has closed itunes flashes up after itunes has closed??

    After the recent update of iTunes. Every time I try to open up the iTunes store it crashes iTunes, But I can play my music absolutely fine through my library. Also whenever I close iTunes a message saying 'data execution prevention has closed iTunes flashes up on my screen??
    Any ideas??

    Hey there KP187,
    Here is an article for you that will help you troubleshoot this issue with iTunes on your PC:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • How to set selection in UIPickerView after view has loaded?

    I have a UIPickerView working just fine, and I can set the current selection when a button is clicked, but how can I set the current selection when the view appears?
    I've tried to set the selection in viewDidLoad, viewDidAppear and viewWillAppear to no avail, I've also tried to do it in initWithNibName. Again no joy.
    As far as I can tell, the sequence of events is that my nib gets loaded by the view, my UIPickerViewDelegate interface methods are called to configure the picker, but what message can I pick up after all that has occured to set the selection?

    Hey Paul-
    I use this in one of my apps and it works great. Once the view loads, the picker gets set to the value I want with a nice animation. Let's say you want to set it to row 3.
    - (void)viewWillAppear:(BOOL)animated {
    [myPicker selectRow:3 inComponent:0 animated:YES];
    Of note: If you have the function - (void)viewWillAppear without the :(BOOL)animated part, it won't throw an error on compile, nor will it get called. Yes, I learned that firsthand.
    Hope this is what you are looking for.

  • How do I download I books after it has been interrupted.? I can't get the I books app to load, How do I download I books after it has been interrupted.? I can't get the I books app to load

    How do I download iBooks after the app was interrupted? I can't get the iBooks app to download

    Sorry, but there is no built-in option to autosplit an exiting project.
    Other than
    writing a custom Automator Workflow or AppleScript to do that programmatically
    or define smart albums or searches for each day, then create a project from each album or search result,
    there is little you can do within Aperture once the project has been imported.
    For an Aperture Newbie I think the easiest solution (uless you already have invested a lot of work into adjusting and tagging the images) would be to
    reexport the gigantic project "Export masters"
    and reimport the exported folder with proper import settings.
    The Autosplit should be turned on
    in the Aperture Preferences -> Import,  Autosplit into Projects
    and during imort in the Import Panel -> Import settings -> Aperture Library Brick -> Automatically split Projects
    Regards
    Léonie

  • How to trace planned order data after it has been converted into production

    Hi, There,
    The planned order has been converted into production order.
    However, I need to trace if this planned order is generated by MRP
    run or created manually. I can't get any planned order info from
    table PLAF. Any input?
    Regards,
    Nancy

    Hi,
    Once fully converted, the Planned Order data will not be available in the Table : PLAF.
    If it is available, then You can have the details with the Time Stamp and User data from PLAF.
    But, the refrence will be available in the Production Order.
    You want to make a Track of the Planned Order details and the Quanity, then you need to have/create Z tables so that the data will be availabe.
    This is how most of the Organizations keep a track of the Planned order data.
    Hope this helps..
    Regards,
    Siva

  • How do I remove application icon after data has been removed?

    I removed the "Sid Mier's Civilation" software from my computer using steam. But the icon still exsists in my app. window thing. I went to Finder>Application to try and delete the icon, but the application is not found in the applications area in finder. The icon won't go away, how do i make it go away?

    It is called Dock and if you control click -> options you can remove or just drag it off. It is just an alias.
      Direct you to the proper forum for MacBook :
    MacBook Series Forums 
    https://discussions.apple.com/community/notebooks?view=discussions
    Mac OS X Forums
    https://discussions.apple.com/community/mac_os?view=discussions 

  • Maybe this question has been found already, but I have yet to find the answer. How can I restore my bookmarks after it has been deleted from my 'bookmarkbackups' folder?

    So it has been a couple months now since I last cleaned up my bookmarks toolbar. And I could remember a couple of bookmarks tabs I wish I did not delete. I found some articles saying I could try restoring previous versions of my bookmarks from the dates of recent system restore points. But the earliest date I found was of only last week's. I've checked everywhere in my Firefox profile for anything that I could restore to date back into that time, but they too only tracked back as early as last week. I believe the automatic backups Firefox had made during that time has now long been deleted from the system in order to make room for my most current ones. How am I going to be able to retrieve those bookmarks when their aren't any backups available now to restore from?

    If you do not have backups of your bookmarks, either in the bookmarkbackups folder or saved elsewhere, then you can't restore your bookmarks.
    For future prevention: http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

Maybe you are looking for