How do I change my telstra bigpond cable login details on my airport extreme base station?
I have reason to believe my password has been compromised so have changed my account details with my ISP but now I need to change the password on my home network.
I have connected to the (n) airport extreme (which is connected to my cable modem) but cannot find any way to see or alter the login details - in fact, I don't even know how the cable modem knows to connect to my cable account.
(If my account is being compromised I wonder if the leech is able to maintain connection to my account just as I am. I can't rermember the last time I needed to type my username and password for my bigpond account...)
Does your ISP require PPPoE in order to authenticate you before accessing their Internet service? PPPoE is a means to transmit your credentials (username & password).
If so, then you would enter your credentials on the PPPoE tab within the AirPort Utility. ref: AirPort Utility > Select the AirPort > Manual Setup > Internet > Connect Using: PPPoE
Similar Messages
-
I really need advice, Im really getting annoyed by this even though its 1 minute. Any advice?
Try Resetting the AirPort Base Station
-
How do I find a hard drive connected to Airport Extreme Base Station?
*Apple Says:* "If your base station supports it, you can connect a USB hard disk to the USB port on your base station and computers on your network (both wired and wireless) can connect to it to access, share, and store files and data."
Cool. So I followed the instructions. The drive is recognized by the base station and listed in the Airport Utility. It looks like it's ready to go...
So... How do I access the drive? I don't see it on my desktop, it's not under network. I've tried "Connect to server..." and browsing, I can't see the drive, anywhere. Yeah, I've searched the crap out of this issue on google and this message board as well as apple support knowledge base. I'm sure this is a simple issue and I'm just missing the obvious. Help me out.Hello Timothy Uhl. Welcome to the Apple Discussions!
Try the following to mount the disk...
o Click on the Desktop to enter Finder
o Go > Connect to Server...
o Enter 10.0.1.1 for the server
o Enter Disk Password
o Connect
If this still doesn't solve the problem, let's double-check your disk sharing settings...
AirPort Extreme Base Station (AEBSn) - File Sharing Setup
Either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
Disks - File Sharing
o Secure Shared Disks: <With disk password | With base station password | With accounts >
(Note: Choose "With a disk password," or "With base station password" if you want to secure the shared disk with a password, or choose "With accounts" if you want to secure the disk using accounts.
If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk.)
o Guest Access: <Not allowed | Read only | Read and write>
o Share disks over Ethernet WAN port: (unchecked)
(Note: Select the "Share disks over Ethernet WAN port" checkbox if you want to provide remote access to the disk over the WAN port.)
o Advertise disks globally using Bonjour: (unchecked)
o Workgroup: <Windows workgroup name>
o WINS server: <WINS server IP address> -
I have an airport extreme base station and have no clue how to change to a pawword type network from the network i have now that is free to the neighbor hood.
Which version of the AirPort Utility are you using?
-
I have recenly upgraded my broadband service and now have a wireless router. My old network configuration was a router connected by ethernet cable to an Airport Extreme base station which then broadcast my wireless network (I also had an Airport Express base staion set up as a wi-fi booster elswhere in the house).
I now have two networks (my original network and the new network from the wireless router) and wish to amalgamate these into one.
Ideally I wish to use the Airport Extreme base station as the "remote" booster (I have purchased Powerline adapters for this purpose) but don't know how to configure the Airport Extreme base station in order to to this.
Can you advise on the best set up for this please?
My Mac is running OS X 10.8.2 and the Aiport untility is version 6.1.
Thanks in anticipation.The AirPort Extreme should be configured to "create a wireless network" with the same WiFi network name, security type (usually WPA2 Personal) and password as your existing router. It should be configured as connection type Ethernet and be in bridge mode.
-
How do I connect my Synology NAS to my AirPort Extreme base station?
I'm considering replacing an Apple AirPort Extreme base station with my current 5 year old router. I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router. I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Thanks for all your help in advance as I am VERY new with networking devices.I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router.
The AirPort Extreme is a combination router, wireless access point, and Ethernet switch. It also provides both external USB hard drive and printer sharing. So, it is not much different than most other routers on the market today. The one main difference is how you administer it. Unlike most other routers that employ a web-based administration interface, the AirPorts use a dedicated utility, called the AirPort Utility.
I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Yes. There are versions of the AirPort Utility for OS X, Windows, or iOS devices.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Your Synology NAS would connect to the AirPort Extreme pretty much the same as for any other manufacturer's routers. That is, you would connect it to one of the available LAN (opposing arrows) ports on the Extreme. You would still use the same web-based interface as before.
Note: When connected to an Ethernet port, the NAS would still function as usual. The AirPort Extreme would not provide any file sharing functionality when connected in this manner. All file sharing features would be the responsibility of the NAS device. -
How to get this Airport Extreme base station to produce a wireless network?
I had this Airport Extreme base station working fine at the house that I moved from a couple of days ago.
After my house move, however, it seems that the AE base station isn't producing a wireless network. My wireless laptop isn't detecting a wireless network. Also, the left hand side light on the AE base station is not lit.
The AE base station was softly cushioned during house the move.
Regarding configuration:
My non-wireless iMac (running 10.3.9) connects to the AE base station via an ethernet cable.
Before my house-move, I regularly connected wirelessly via the AE base station from a couple of wireless-equipped laptop computers.
I was using AE software version 5.6. (In desperation, I have just updated to version 5.7 - but that hasn't improved or changed situation.)
At the new house, I found that I had to reset the AE base station back to factory settings before I could successfully connect to the internet through the AE base station from the (non-wireless) iMac.
Since resetting the AE base station at the new house, I can also print via a USB printer that's plugged into the AE base station.
I just cannot pick up any sign of a wireless network from the AE base station.
G4 Powerbook Mac OS X (10.3.9) Problem started while I had Airport Extreme software v5.6. No improvement/change after v5.7 update.Sorry for my delay in closing this issue.
I got the wireless network running again - though I'm not sure which of a "litany" of separate actions (which I gleaned from dialogs in several similar postings for similar issues to mine) was the solution. I suspect it was one of the following two actions, which have stuck in memory:
1) I relocated a nearby cordless phone cradle/charger/base-station from alongside the Airport Extreme base station to about seven feet (two meters) away. However, the cordless phone is about eight years old, and I believe its radio frequency is far out of the range that I have read (in similar postings) can interfere with the Airport Extreme base station.
2) I re-set the Airport Extreme base station, (a) by depressing the tiny reset button at the rear of the base station for more than 5 seconds (until the led started blinking), (b) from Utilities/AirPort Admin Utility/Configure/Restart. However, I had reset the Airport Extreme base station those ways previously without that restoring the wireless network. Also, I didn't record the sequence of the multiple resets and the configurations at the times of the resets. -
What is Error 2813 while trying to install my Airport Extreme Base Station(A1143/MA073LL/A)? and How can I fix it? Thanks
Did you remember to completely power cycle the entire network?
You would want to do this after any update or change to the network.
If you did not do this yet......things are out of sequence.
Power off everything on the network.....all devices.....power down order is not important
Wait a few minutes
Start the modem first and let it run a minute or two by itself
Start the next device connected to the modem the same way
Work your way out on the network starting each device about a minute apart
Check the network -
Please help me connect eMac, cable modem, and Airport Extreme Base Station
I connected Ethernet cord from cable modem to Airport Extreme Base Station and then another Ethernet cord from Airport Extreme Base Station to eMac, but I could not get internet access on my eMac that way. I'm only getting internet access by directly connecting eMac to cable modem. Can someone please help me with a step by step explanation of how to set these 3 machines up so that I can have internet access on both my eMac and, wirelessly, on my new MacBook. Thank you very much in advance.
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)jenngee, Welcome to the discussion area!
Ensure that you power off the cable modem for a minute or so when you switch it to another Ethernet device.
Ensure that you are connecting the WAN port of the AirPort Extreme base station (AEBS) to the cable modem. The eMac should connect to the LAN port.
The steps for setting this up can be found in the "Designing AirPort Networks" (direct PDF link) document. Look through that document and try to get it setup. Then return here if you have more questions. Don't forget to post what you tried and the issues you encountered. -
i have an airport extreme base station ,i conneted a hdd and i want to acces the hdd with my macbook from another place ...office...school....
I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router.
The AirPort Extreme is a combination router, wireless access point, and Ethernet switch. It also provides both external USB hard drive and printer sharing. So, it is not much different than most other routers on the market today. The one main difference is how you administer it. Unlike most other routers that employ a web-based administration interface, the AirPorts use a dedicated utility, called the AirPort Utility.
I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Yes. There are versions of the AirPort Utility for OS X, Windows, or iOS devices.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Your Synology NAS would connect to the AirPort Extreme pretty much the same as for any other manufacturer's routers. That is, you would connect it to one of the available LAN (opposing arrows) ports on the Extreme. You would still use the same web-based interface as before.
Note: When connected to an Ethernet port, the NAS would still function as usual. The AirPort Extreme would not provide any file sharing functionality when connected in this manner. All file sharing features would be the responsibility of the NAS device. -
As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router. I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router). Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue. I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP. I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP. I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine. How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports? Forwarding ports doesn't work for multiple IP's.You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.
-
How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet
This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
http://support.apple.com/kb/HT4145
In particular, you would want to focus on the information regarding a "Roaming Network" -
How can I extend a wireless network with my AirPort Extreme Base Station?
Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
-MacUserThe Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one. -
How to add Ethernet ports to an Airport Extreme Base Station?
I have successfully connected an HP Office Jet 6310 to the Airport Extreme Base Station, after downloading the latest software from HP. It is printing wirelessly, and it is great so far.
The only problem is that the cable modem connected to ADSL has only one Ethernet port, and the Airport Extreme Base Station also has one Ethernet port. However, I need one more port to connect a phone (Vonage Telephone Adapter = VTA).
What is the easiest way to achieve this? I saw several other messages discussing hubs and routers, but the answer is not clear yet. If I purchase an additional router, should it be connected between the cable modem and the Airport Extreme Base Station, or the other way round?
Any help or advice would be appreciated!
Thank you in advance for your time.
MacBook Pro with 1.83 GHz Intel Core Duo Mac OS X (10.4.7)One final vital piece of information, which should be my conclusion on this topic.
Following the advice received, I purchased a Switch from Linksys. Since the device didn't work for my purpose (dividing the Ethernet connexion into an Ethernet line for the HP printer and the Vonage phone), I called the Linksys support.
I was told that what I needed was not a switch, but a router. I thus had to get reimbursed for the switch and hunt for the proper router.
Finally, today, I have been able to find the item corresponding to my needs:
A Belkin Wireless G Router F5D7230-4
It costs less than 50 US$ and has all the necessary Ethernet ports. The setup is very simple, and I got it operational within a couple of minutes, despite some small problems getting the setup Wizard to work. It is Mac OS X compatible.
Thus, at the end, I have got the HP 6310 Office printer and the Vonage VTA phone working together, with a robust Wireless network including WPA security. I would recommend this type of setting.
The only trouble is that the AirMac Extreme Base Station has become completely useless! I will perhaps keep it as a souvenir, or as a decoration in the living room... This wouldn't have happened if the creators of this nice object, which is extremely expensive for what it provides, would have thought of including at least two Ethernet ports!
The unexpected reply to my query could thus be ironically formulated by saying: "replace the Airport Extreme Base Station with a cheaper an more efficient device." Sorry for that!
With my best regards to those who took the trouble to read this thread to the end.
Yours, Hotaru -
How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!
Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.
Maybe you are looking for
-
What happens when my rescue email no longer exists for my apple account
How do I change my rescue email for my apple account?
-
I downloaded Firefox 4 and lost Norton protection on websites. Tried to reload Firefox 3.6 could not , if I can't get Norton protection I will have to delete Firefox 4
-
How can i detect the version of the browser in applet
i wanto detect the version of the browser in applet can you help me?
-
How to Set up Map MetaData in OBIEE 11g.
Hi Guys, I have one requirement in the spatial data .which am needs to show some states with color on the USA map. I am working as developer in OBIEE 11g. Dont know about the map Metadata in OBIEE. So kindly, share some of your experience and show so
-
Invoked super class constructor means create an object of it?
Hei, i have create one class that extends another class. when i am creating an object of sub class it invoked the constructor of the super class. thats okay. but my question is : constructor is invoked when class is intitiated means when we create an