How do I change page breaks?

How do I change page breaks and margins in Numbers?

Hi Sharon,
Margins are set in the Sheet Inspector. These settings determine the closest that your content can come to the paper edges. You can set different margins for each Sheet in your document.
I have made an edit here, and I mention this in case you saw the original, because I originally mistook your post for a Pages question.
Sorry it took so long for you to get a reply. I started earlier but had an interruption.
Regards,
Jerry

Similar Messages

How to make a page break in numbers

The only way I found to make a new page in Numbers was to make new rows down to where the page would break, but it's only letting me add a few new rows to the new page. I'd like to know how to make a page break without just adding rows.

Hi Yellowbox,
Still I'm not convinced, it gives you indeed some advantages but this page break is a great fault.
All the company is working on Apple, we try even to keep Microsoft away but what when you make a quote of several pages and have to make your lay out at the end, it is a pain in your xxx to make it well.
We cannot make different tables for each page nor I want to make it in Pages with a Numbers table.
Secondly, what do you do when you get a Excell offer that you want to bring to Numbers.
It opens well but again, you need to make all the page lay out afterwards!
Thanks for yoru reply.
It won't change my mind about Apple and Microsoft but for timing earning I won't changes all Excel offers to Numbers anymore. Even if I do not want, it would take me less time to work it out in Excel.
Our own offers will remain in Numbers ...
It is a pity but time is so important nowadays!
Nice week-end.

How to create a page break in PDF output

Hi there
Does anyone know how to create a page break in the PDF output when using the EXPORT TO PDF command?
I can create a page break using the page-break-after/before HTML stylesheet command, but this is not "interpreted" when the PDF is generated, and I am required to print each table in my web template on a new page.
Please ... been searching for ages for a solution to this and can't find anything.
Cheers,
Andrew

Try posting in the iWorks forum.
https://discussions.apple.com/community/app_store/iwork_for_ios

How can you insert "Page Break" in a pdf file so you will specify the pages

How can you insert "Page Break" in a pdf file so you will specify the pages

How / from what was the PDF originally created? It would be easiest to insert page breaks into the original document, then recreate the PDF.

How We Can Change Page Size During Report Run Time

Hello !
How We Can Change Page Size During Report Run Time .
How can we stop to change the column name when we amend a sql in report data model.
Thanks !
null

hello sohail
1. question - i'm afraid this cannot be done ... bit in report 6 and newer you have posibility to divide your report in 3 parts (former header, body, trailor) and each part can have diferent page siz, orientation , ...
2. question - best is give each column in your statements in one report diferent alias. when you have to chnge something, alias will remain same ...
try this: select 1 as fist_column, 1 as second_column from dual
hope this helsp

How to insert a Page Break Programatically ?

Hello,
How to insert a Page Break Programatically ? Please Help..
Regards,
Aanta
Message was edited by:
user526601

Hi Praveen,
Thanks for the reply...
I think <?split-by-page-break?> syntax is used in a loop. In my case i need to check the condition.. if its true i need to insert Page break.
I have requirement Like as follows
- In the Invoice Print Report I need to display “Invoice Appendix” On the Last Page of an Invoice.
- If I am running for multiple Invoices then Invoice Appendix should print on last page of each Invoice.
As I'm using XMLP 5.6.1, i'm unable to use <?start@last-page:body?> syntax. So i'm trying to achive this as i'm explaing below.
Invoice Header
Invoice Lines
end Of Lines
If Invoice_Appendix_flag = 'Yes'
---------------<Page Break>------------------
New Page(Or Last Page)
Start Of Invoice Appendix
End Of Invoice Appendix
End Of Header

How to achieve dynamic page break in Smart form

Hi
1.How to achieve dynamic page breaks in Smart forms.
2.What are the various table types in Smart forms.
Regards

Dynamic page break : 
create a node of type COMMAND and in its attributes check "Go to new page".
There are Tables and Templates in smart forms :
Use node type Template to display a table whose layout and size (number of lines and columns) is determined before the runtime of the print program else use Table.
Take a look at <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf">SAP Smart Forms (BC-SRV-SCR)</a>
Regards

How do I change page setup print margins from Milileters to inches?

How do I change page setup print margins from Milileters to inches?

This has to do with selecting the paper size in the print setup. If you select a (European) paper format that uses millimeters then the margins are in millimeters. To get inches just select an American paper format.

How can I change pages' language to catalan?

How can I change pages' language to catalan? I need the corrector in catalan. I have the files which I must copy in "spelling/library" but I can't find it. One year ago, when I bought my iMac, I did it. I copied the m.aff and m.dic to "spelling/library" (snow leopard), but on my MacBook Air (Lyon) I can't find it. Any help? Thanx

http://tidbits.com/article/12306

HT1430 How do I change page and get back to app store homepage?

How do I change page and get back to app store homepage?

Reset your homepage. 
http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

How to put a page break when a value changes

Hi there, I am very new to BI Publisher. I realize this is a really SIMPLE question, but I can't seem to find a CLEAR answer.
I have a set of data that I have a repeating group for in my RTF template and it works great. But I want to have a page break each time one of the values changes and I cannot figure out how.
here is the xml
<?xml version="1.0" encoding="UTF-8" ?>

<PIR05>
<LIST_G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>123</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>614</LINE_NO>
<COUNT_NO>614</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
- <G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>1232</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>615</LINE_NO>
<COUNT_NO>615</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>562354</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>WOR RECV</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>603</LINE_NO>
<COUNT_NO>603</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
</LIST_G_ITEM_NO>
<WHSE_DESC>OPM INVENTORY ORG</WHSE_DESC>
<CS_NODATA>617</CS_NODATA>
<CYCLE_NO>000000014</CYCLE_NO>
</PIR05>
I want the g_item_no (repeating group) to have a page break each time LOCATION changes.

You can declare two variables, to hold the previous and current LOCATION values and break the page when it differs.
Or just before your end-for-each, have this code.
<?if:position()!=1 and position()!=last() and LOCATION!=following::LOCATION[1]?><xsl:attribute name="break-before">page</xsl:attribute><?end if?>
Ensure that its placed in a form field.
This will have a page break when LOCATION changes.

Changing Paper size does not change page break?

I am using Oracle Report R6i.
I have created a matrix report showing months horizontally and items vertically. By default, the report displays a vertical line (Page Break Line) at 8 inches (as shown in Ruler).
I change the paper size in Page Setup Menu but still the page break line displaying at 8 inches due to which only 03 months are displaying per page at Landscape mode. My page size is : 210x230 cm.
How can I extend that page break line so that atleast 6 months to be displayed per page.
Regards,
Luqman

Changing the size used by the printer with the page setup dialog does not affect how Reports formats the output. You need to change Reports page size for this.
In 6i, the page size for Reports is controlled by properties against the Section objects (header, main, trailer) in the navigator.
In 2.5 you would set the vertical and horizontal page size in the Reports property palette for all sections. With the introduction of individual sections in 6i, each section can have it's own page size.
In your example you probably want to change the page size against the "main section" to 13" x 8.26" to get the report to format in Landscape. Also remember to set the ORIENTATION parameter or property to "Landscape" so that the printer is set to Landscape as well.

How do I change page order

I have a six page document. I want to change the position of the pages for printing. I am unable to make page or section breaks. Three of my pages are all linked with that awful yellow line around all three and am unable to move any of those pages around within that three yellow line of pages.
I think the reason is that my pages are mostly pictures, not text, and so if I click on the picture at the bottom of a page and go up to insert, I am unable to insert either a section break or a page break. How do I get aroud this?

You do need a section break to separate the pages, but don't click on the picture, click on the page body. It's easier to see where you want to place your cursor if you go to View > Show Invisibles. It's not always easy to see where the cursor is with pictures, though. Try inserting some paragraph returns to see better. You can always delete them later.

How to make a page break/create independent sections

using apple pages how do i make section breaks where i can have a different number of
columns in each section? 5 column until line 48 and then 3 columns thereafter etc?

Inserting a section break will always create a new page. If you want to change the number of columns on the same page, insert a layout break.

How to remove the page break for CSV report

Hi,
I'm working on a rdf report and have an issue with page break.
As usual there exits a page break in the report output. how do I remove it.
work around: set Page break before/after : NO
worked on margin re-size, how ever could not resolve the issue.
Can any one help me on this.
Thanks in advance.
Thanks,
Santhosh

There are two ways to do this:
1) If you want to remove and individual dimension from a presentation, you can hide the dimension. This can be performed directly from within QueryBuilder. Within the first section of Query Builder that shows the selected measures selected and associated dimensions, simply remove the required dimensions from the right dialog panel.
2) To hide all page items within a presentation, simply add the following the property, pagingControlVisible="False", to the presentation tag in your JSP. For example:
<orabi:Presentation location="Local Computer Sales/Products/KPI Sales Prior Period and Prior Year" id="BIProductKPIs_pres2" pagingControlVisible="False"/>
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

How do I change page breaks?

Similar Messages

Maybe you are looking for