How do I change shingle sizes for a roof?

Hello everyone, I am totally new to elements 8. Had the program for a little while now and am learning from every resource that I can. My question is, how do I make textures show up properly on surfaces. My example is, I am trying to get a shingle texture to show an a roof with the right scale. When I apply the pattern the whole roof has only a few shingles. Is there a way to have them show up in the hundreds as they should be. I have searched and read a ton of stuff but I haven`t seen this anywhere. Any help would be greatly appreciated. THANKS

If your using a pattern that is in your pattern presets,
then you can use the scale slider in the pattern fill adjustment
layer dialog.
If your pattern (texture) is not in your presets, you can define it as a pattern
so it shows in you presets.
If your texture is a seperate file like a jpeg, you can open it in photoshop
elements and save the texture as a psd file with maximize compatibilty
and open it using the texturizer: Filter>Texture>Texturizer and scale
in that dialog.
Scale !00%
Scale 50%
Texturizer
MTSTUNER

Similar Messages

How do I change packet size for a single load

All,
I need to change the packet size for a single load I'm doing. How do I set that?
Thanks.
Dave

Hi..........
For this u hav to go to the infopackage scheduler........
If u r in Process chain >> Right click on the infopackage >> Maintain variant..........then it will come to the IP scheduler..................In the Top Scheduler Tab >> Click on it and select DataS. Default data transfer .......Now there may be a delta IP and Full upload IP for the same datasource.......check ur IP .....it is full or delta..........if full change the packet size for full upload..............otherwise for delta upload........
If the IP is not a part of any Process chain..........then go to RSA1 >> Find the IP..........and double click on it........then the IP scheduler screen will open..........
You can make global settings for all datasources...... in the transaction SBIW in the area General Settings >> Maintain control Parameter for Data transfer......... The parameters that you maintain here are valid as global standard values, and thus apply to all DataSources.
Hope this helps.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Nov 13, 2008 2:19 PM

How do i change font size for iMac without change the screen resolution?

I have a iMac 27", and it have maximun resolution screen of 2560 x 1440, then the size of the font into the bar of the windows and application is to small. If I change the resolution (1920 x1080) the font size increased, but the definition o apparence is to low. I wants to keep the higthes resolution and obtain larger font.
Thank you.
Tengo un computador iMac de 27 pulgadas que además tiene una resolución de pantalla de 2560 x 1140, por lo tanto el tamaño de font o letra en la barra de menús de cualquier ventana o aplicación se ve muy pequeña. Si se cambia la resolución a una inferior el tamaño aumenta; pero se ve borroso. Quisiera mantener la máxima resolución y tener un tamaño de font mayor.
Gracias

Hello,
You can't really change it overall, but you for some Apps, like Safari>Preferences>Appearance, Mail>Preferences>Fonts & Colors.

How do I change font size for outgoing emails? I'm using aol email, should I use something else?

I have read many others asking the same question .... But, can't seem to find any answers. Would appreciate any help! Thanks!

It was already on 100 per cent. I clicked it just in case. Nothing happerned.

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
1. Open Photoshop.
2. Select Preferences from the Edit Menu, then select General.
3. Change the HUD Color Picker to Hue Strip (Medium).
4. Select Interface from the Preferences menu on the left side of the dialog box.
5. Change the UI Font Size to Large in the Text area of the Preferences dialog box.
6. Select Experimental Features from the Preferences menu on the left side of the dialog box.
7. Select Scale UI 200% for high-density displays (Windows only).
8. Click on OK, then Exit/Quit Photoshop.
9. Open Photoshop and everything should be readable.

How can I change font size in iCal 3.0.8?

How can I change font size in iCal 3.0.8?

Julian,
There is no user option to change the font size in iCal.
For other posts regarding this topic, read some of the links in "More Like This." box just to the right of your first post in this thread.

How to setup a default size for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

How do you change the size of pictures?

Hello,
I'm a new Mac user. How do you change the size of pictures in iPhoto? Sometimes when sending e-mails, the picture files are extremely large and take a long time to load... Is there any way you can make the picture or file smaller? Like on a PC, you can open the photo in the Paint program and just reduce the size... Is there anything like this for the Mac?
Thanks!

Assuming that you're accessing your email package from INSIDE iPhoto, you're given a choice of picture sizes. Personally, I've found "medium" to be a good compromise but you might prefer "small" (iPhoto will tell you the file size).
If you don't know what I'm talking about, first go iPhoto Preferences > General and select your email client. Then, go to the View menu and select Show in Toolbar > Email.

How can I change to size of a book and keep all the layouts I have created?

How can I change the size of a book and use the layout that I have already chosen (I accidently laid the book out for a larger size book than what I acctually wanted)?

Just in case of problems duplicate the book (select it and edit ==> duplicate or Command=D) and then click on themes and select the same theme in theprper size - verify that everything worked (sometime different sized text blocks cause minor problems that require attention) and preview it -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
then order
LN

How do I change text size in a check box in CS3

How do I change text size in a check box in CS3?

While I've never done it myself for a checkbox, components
have a textField property which is essentially the texfield inside
the component. You probably need to apply a TextFormat to it to
change the size.
But if this involves the same problem you had yesterday,
where you couldn't change the width of the checkbox, I doubt you'll
have much luck changing the text size

How do I change the size of my screen, in Develop Module, so that I can access the Exposure Slide in the right-hand colummn?

The right-hand column, under the Develop Module, begins with the Histogram and directly under the Histogram, the Tone Curve is seen. Missing is the Exposure Slide. How do I change the size of the screen to show the Exposure Slide before the Tone Curve?

Right-click (Cmd-click Mac) on the tone curve panel header or any of the other panel headers and make sure there is a checkmark for Basic.

Change MRU Size for a PPP Dialup Connection

Hello,
I need to lower the MRU Size for a modem PPP connection.
Do do that, I tried to add a /etc/ppp/options file as descripted in the man pages (man pppd).
Unfortunatly Tiger ackn. then received MRU size of 1524 even
I adjusted the PPP MRU size to 1280 (IP V6 min.).
This setup doesn't work, When I transfer larger packets the connection breaks down.
How to setup a MRU size for a PPP connection?
And fix the man pages please.
Thanks
Henri Hoffmann
PowerBook:/etc/ppp henrihoffmann$ cat options.ppp0
debug
mru 1280
mtu 1280
Fri Dec 16 16:04:05 2005 : Connect: ppp0 <--> /dev/cu.BluetoothISDNAccessPoin-2
Fri Dec 16 16:04:06 2005 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd8ad45df> <pcomp> <accomp>]
Fri Dec 16 16:04:06 2005 : rcvd [LCP ConfReq id=0x1 < 00 04 00 00> <mru 1524> <auth pap> <mrru 1524> <endpoint 13 09 03 00 c0 7b 80 7b 8d>]
Fri Dec 16 16:04:06 2005 : lcp_reqci: rcvd unknown option 0
Fri Dec 16 16:04:06 2005 : lcp_reqci: returning CONFREJ.
Fri Dec 16 16:04:06 2005 : sent [LCP ConfRej id=0x1 < 00 04 00 00> <mrru 1524>]
Fri Dec 16 16:04:06 2005 : rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
Fri Dec 16 16:04:06 2005 : sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xd8ad45df>]
Fri Dec 16 16:04:06 2005 : rcvd [LCP ConfReq id=0x2 <mru 1524> <auth pap> <endpoint 13 09 03 00 cFri Dec 16 16:04:06 2005 : lcp_reqci: returning CONFACK.
Fri Dec 16 16:04:06 2005 : sent [LCP ConfAck id=0x2 <mru 1524> <auth pap> <endpoint 13 09 03 00 c0 7b 80 7b 8d>]
Fri Dec 16 16:04:06 2005 : rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0xd8ad45df>]
0 7b 80 7b 8d>]
G4 Powerbook Mac OS X (10.4.3)

does not fit. I need to change a ISDN modem PPP connection.
By the way, the PPP controller overrules the MRU and MTU settings in /etc/ppp/options. I hate when a vendor decides to overrule the seetings made by a user (customer!). Therfore I dont like MS.
And options descripted in man page which are overruled by the system .....
It took my at least 6 hours to debug the stuff with ethereal. The connection breaks when the powerbooks segments a packet (1 pice len=1448, second pice len=98. In this case a packet get lost somewhere.
I need this stuff working, the alternative is only the travel with a Powerbook and a Thinkpad to have a ISDN connection to a very importend customer of mine.
Please give me a option to controll this stuff !
Thanks
Henri
G4 Powerbook Mac OS X (10.4.3)

How do you change the size of the font in the menu bar running Maverick?

On Maverick, how do you change the size of the menu bar font?

Sent my feedback already:
Thank you for your feedback on the MacBook Pro.
We cannot respond to you personally, but please know that your message has been received and will be reviewed by the MacBook Pro Team. If we need to follow up with you on your ideas for improving the MacBook Pro, we will contact you directly.
We appreciate your assistance in making the MacBook Pro a great computer.
MacBook Pro Team
Apple

How do you change the size of the font in iMessage?

How do you change the size of the font in iMessage?

I'VE DONE IT!
I found 2 little boxes floating outside of each of the englarge pasteboards.
i foudn them using select all, and then deleting the boxes.
FINALLY! Thanks for all your help though Hopefully this will help someone else!

How do you change the size of a photo in a document?

Hello
I've pasted a photo into a document I'm typing but the photo is too big. How do I change the size of the photo?
Thanks

TextEdit is not a very sophisticated program. As far as I know, there's no way to resize an image on the fly in TextEdit, so you'll have to follow Shotgun00's advice.
I would advise not using TextEdit for anything real. Buy yourself a copy of Pages from the App Store instead, you'll be much happier with its capabilities if you intend to create complex documents containing images and text.

How do I change shingle sizes for a roof?

Similar Messages

Maybe you are looking for